当Windows^(Windows)操作系统遇到严重错误时，系统会引发蓝屏^{(Blue Screen)}死机^(Death)( BSOD )。然后，此蓝屏死机^{(Blue Screen of Death)}在左下方区域输入错误代码，然后重新启动计算机。此错误主要是由于某些内部系统进程或文件已按预期停止工作。有时，DLL或动态链接库^{(Dynamic Link Library)}文件出现故障或系统内的任何关键进程返回错误。好^(Well)，在这种情况下，很多时候用户当前正在执行的任务被系统强行关闭。这意味着用户在其计算机上的未保存工作的损失更大。因此^(Hence)，要解决此问题，我们需要禁用自动重启。

在Windows中禁用系统故障^{(System Failure)}时自动重启^{(Automatic Restart)}

首先^(First)，我们建议您创建一个系统还原点。因为我们将使用注册表文件并修改一些非常关键的Windows设置。完成此操作后，我们将继续寻求在Windows 10中禁用系统故障时^{(System Failure)}自动重启^{(Automatic Restart)}。

1：使用启动^(Startup)和恢复设置^{(Recovery Settings)}

首先，首先点击WIN + R 组合启动运行^(Run)实用程序。

现在，输入 sysdm.cpl ，然后 按 Enter ^(Enter )启动 系统属性。^{(System Properties. )}接下来，单击名为“高级 ^(Advanced )”的选项卡，然后在标记为“ 启动和恢复”的部分下， ^{(Startup and Recovery, )}单击“ 设置”按钮。^(Settings.)

现在将打开一个新的弹出窗口。在称为 系统故障的部分下， ^{(System failure, )}取消选中标记为 自动重新启动的选项。^{(Automatically restart.)}

现在，单击 确定 ^(OK )，然后 单击应用 ^(Apply )，然后再次 单击确定。^(OK.)

现在重新启动^(Reboot)计算机以使更改生效。

2：使用具有管理员级别权限的^{(Admin Level Privileges)}命令提示符^{(Command Prompt)}

通过按WIN + X 按钮组合开始，或右键单击开始^(Start)按钮并单击 命令提示符（管理员）^{(Command Prompt (Admin) )}或仅在搜索框中搜索cmd，右键单击命令提示符^{(Command Prompt)}图标并单击以管理员身份运行。^{(Run as Administrator.)}

现在，键入以下命令以禁用系统故障^(System)时自动重启：^{(Automatic Restart)}

Disable Automatic Restart on System Failure: wmic recoveros set AutoReboot = False

或者，您可以键入以下命令以启用系统故障^(System)时自动重启：^{(Automatic Restart)}

Disable Automatic Restart on System Failure: wmic recoveros set AutoReboot = True

输入exit并按Enter退出命令提示符。

重新启动^(Reboot)计算机以使更改生效。

3：使用注册表编辑器

首先，首先点击 WINKEY + R 按钮组合以启动 运行 ^(Run )实用程序。

现在输入 regedit 并按 Enter。

或者，您可以 在Cortana 搜索框中搜索^{(Cortana Search)}注册表编辑器 ^{(Registry Editor )}并选择适当的选项。

对于您获得的 UAC 提示，单击 是 。^(Yes )

现在，导航到注册表编辑器^{(Registry Editor)}内的以下键位置，

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl

在左侧窗格中选择CrashControl ，然后双击 右侧窗格中的AutoReboot  。

现在，将弹出一个新的迷你窗口。在数值数据^{(Value Data)}字段中，输入值为0（零）。单击 确定。^(OK.)

重新启动 ^(Reboot )计算机以使更改生效。

4：使用高级启动选项

首先在 高级启动选项中启动。^{(Advanced Startup Options.)}您可以在本文中的“高级启动^{(Advanced Startup)}选项”中了解有关启动的更多信息。^{(here in this article.)}

现在，在高级启动^{(Advanced Startup)} 选项^(Options)中启动后，单击 疑难解答。^{(Troubleshoot.)}

然后在您获得的三个选项中，单击 高级选项。^{(Advanced Options.)}

之后，单击 启动设置。^{(Startup Settings. )}然后，单击标记为重新启动的按钮。^(Restart.)

重新启动后，系统将启动进入启动设置^{(Startup Settings)}，只需按 F9 键 ^{(F9 key )}或 9 键即可选择“禁用失败后自动重启^{(Disable Automatic Restart after failure)}”选项。

Cheers!

Disable Automatic Restart on System Failure in Windows 11/10

When а critical error іs encounterеd by the Windows operating syѕtem, the system throws a Blυe Screen of Death (BSOD). This Blue Screen of Death then throws in the error code on the bottom left region and then reboots the computer. This error is mainly caused due to the fact that some internal system processes or files have stopped working as expected. Sometimes, DLL or Dynamic Link Library files have malfunctioned or any critical process inside of the system has returned an error. Well, in this case, many times the task that the user is currently performing is left and closed forcibly by the system. This implies a greater loss of unsaved work by the user on their computer. Hence, to fix this we need to disable Automatic Restarts.

Disable Automatic Restart on System Failure in Windows

First of all, we would recommend you create a System Restore point. Because we will be playing with registry files and modifying some really critical Windows settings. Having done this, we will continue on our quest of disabling Automatic Restart on System Failure in Windows 10.

1: Using Startup and Recovery Settings

First of all, start by hitting the WIN + R combination to launch the Run utility.

Now, type in sysdm.cpl and then hit Enter to launch System Properties. Next, click on the tab called Advanced and under the section labeled as Startup and Recovery, click on the button that says Settings.

A new pop-up window will now open. Under the section called System failure, uncheck the option labeled as Automatically restart.

Now, click on OK then on Apply and then again on OK.

Reboot your computer now for the changes to take an effect.

2: Using Command Prompt with Admin Level Privileges

Start by pressing WIN + X button combo or right-click on the Start button and click on Command Prompt (Admin) or just search for cmd in the search box, right-click on the Command Prompt icon and click on Run as Administrator.

Now, type in the following command to disable Automatic Restart on System Failure:

Disable Automatic Restart on System Failure: wmic recoveros set AutoReboot = False

Or, you can type in the following command to enable Automatic Restart on System Failure:

Disable Automatic Restart on System Failure: wmic recoveros set AutoReboot = True

Type in exit and hit Enter to exit the Command Prompt.

Reboot your computer for the changes to take an effect.

3: Using the Registry Editor

First of all, start by hitting the WINKEY + R button combination to launch the Run utility.

Now type in regedit and hit Enter.

Or, you can search for Registry Editor in the Cortana Search box and select the appropriate option.

Click on Yes for the UAC prompt that you get.

Now, navigate to the following key location inside of the Registry Editor,

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl

Select CrashControl in the left pane and then double click on AutoReboot on the right pane.

Now, a new mini-window will pop-up. Inside the Value Data field, enter the value as 0 (ZERO). Click on OK.

Reboot your computer for the changes to take an effect.

4: Using Advanced Startup Options

Start by booting in the Advanced Startup Options. You can learn more about booting in the Advanced Startup Options here in this article.

Now, after you are booted in the Advanced Startup Options, click on Troubleshoot.

Then out of the three options you get, click on Advanced Options.

After that, click on Startup Settings. Then, click on the button labeled as Restart.

After the restart, the system will boot into Startup Settings, just hit the F9 key or 9 key in order to select the option to Disable Automatic Restart after failure.

Cheers!

Related posts

• 在Windows 10中禁用System Failure上的Automatic Restart

• 如何引导至 Windows 11/10 系统恢复选项

• 什么是注册此Program为Restart在Windows 11/10吗？

• Microsoft Edge在Windows 10 Restart上保持Auto-resetting

• Restart Chrome，Edge or Firefox在Windows 11/10中没有输出标签

• 在 Windows 11/10 中以兼容模式运行旧程序

• Windows 自动更新消息后禁用立即重新启动消息

• 如何在Windows 11/10重置或清除Data Usage

• 如何在Windows 11/10延迟装载特定的Services

• Windows 10 PC：Tips & Tricks剪断Tool：Tips & Tricks捕获截图

• 如何在 Windows 11/10 中更改默认 Web 浏览器

• Windows 10基本Command Prompt Tips

• 如何在Windows 10中键入特殊字符和字母

• 如何使Graph Paper在Windows 11/10

• 如何在Windows 11/10中安装Graphics Tools

• Windows 11/10 Recycle Bin Tricks and Tips

• 如何在Windows 10清除Cache

• 如何找到Windows 11/10中安装Program的位置

• 如何为 Windows 11/10 PC 分配静态 IP 地址

• 如何在Windows 10系统上拆分屏幕？这是提示