Microsoft创建的^(Microsoft)BitLocker安全软件基于下一代安全计算架构。它对所有设备进行加密，无论是便携式还是非便携式，以防止在设备上工作时第三方入侵。许多组织都使用它，员工将机密数据从一个地方带到另一个地方。这种无缝用户友好的软件有一些缺点；因此，许多用户希望从他们的设备中停用它。在这篇文章中，我们将说明如何在 Windows 11/10 上恢复或暂停 BitLocker 加密。^{(esume or suspend BitLocker encryption)}

此安全功能易于使用，对系统的硬件进行加密，并以很好地服务于安全目的而闻名。但是，设备加密可能会成为一些用户的问题，因为它可能会降低计算机的速度。有时设备加密需要更长的时间，最重要的是它仅在系统兼容加密时才支持。

如何在 Windows 11/10 上恢复或暂停BitLocker加密

Bitlocker越来越受欢迎，并且越来越多地被现代设备用于防止数据泄露。可以从系统的硬盘驱动器中提取受保护的数据。它还允许用户在密码的帮助下保护重要数据。在本教程中，我们将了解如何在Windows 11/10BitLocker加密。

1]在 Windows 11/10 上恢复 BitLocker加密^{(Resume BitLocker)}

如果您想恢复之前在Windows 10 PC 上暂停的^{(Windows 10)}BitLocker加密，请使用以下建议：

1. 首先，打开控制面板窗口^{(open the Control Panel window)}。
2. 单击系统和安全^{(System and Security)}部分。
3. 向下滚动并选择BitLocker 驱动器加密^{(BitLocker Drive Encryption)}选项。
4. 选择恢复保护^{(Resume protection)}选项。

如果需要，可以详细看上面的步骤：

要开始使用，请先打开控制面板^{(Control Panel)}。为此，单击Start，键入Control Panel并按Enter键。

在“控制面板^{(Control Panel)}”窗口中，前往“系统和安全^{(System and Security)}”选项。

接下来，向下滚动，然后单击BitLocker 驱动器加密^{(BitLocker Drive Encryption)}选项。

现在在操作系统驱动器标题下，单击恢复^(Resume)保护链接以恢复Windows 10上的^{(Windows 10)}BitLocker加密。

之后，重新启动计算机以完成该过程。

阅读^(Read)：如何备份 BitLocker 驱动器加密恢复密钥。

2]在 Windows 11/10 上暂停 BitLocker加密^{(Suspend BitLocker)}

BitLocker有效地保护系统数据免受冷启动攻击，但其加密可能会在系统更新和固件中产生问题。因此^(Therefore)，你们中的许多人可能希望暂时中止它。请务必注意，BitLocker暂停不是永久性的，暂停后创建的新数据会保持加密状态，直到再次暂停以进行数据解密。

要在Windows^(Windows) PC 上暂停BitLocker加密，请遵循以下建议：

1. 打开控制面板窗口。
2. 单击系统和安全^{(System and Security)}部分。
3. 向下滚动并选择BitLocker 驱动器加密^{(BitLocker Drive Encryption)}选项。
4. 选择暂停保护^{(Suspend protection)} 选项。
5. 单击是^(Yes)按钮继续。

现在让我们详细看看上面的步骤：

可以使用计算机系统的控制面板来完成暂停。因此，首先，打开控制面板并选择系统和安全^{(System and Security)}选项。现在选择BitLocker 驱动器加密^{(BitLocker Drive Encryption )}选项。

在BitLocker窗口中，单击操作系统驱动器标题下方的暂停保护 ^{(Suspend protection )}选项。然后单击是^(Yes)按钮以确认更改。重新启动计算机并检查是否完成。

请注意，如果您暂停保护，您的数据将不会受到保护。有时您可能需要在更新Windows或 PC 固件时暂时挂起BitLocker 。因此，如果您忘记恢复BitLocker保护，它将在您下次重新启动 PC 时自动恢复。

相关： ^(Related: )如何更改 BitLocker 加密方法和密码强度。

How to Resume or Suspend BitLocker encryption in Windows 11/10

BitLocker security software created by Microsoft is based on next-generation secure computing architecture. It is encrуpted for all devices whether portable or non-portable to prevent third-pаrty intrusion while working on the dеvice. It is used by many organizations where employees carry confidential data from one place to other. This seamlessly υsеr-friendly software comes with some drawbacks; therеfore many usеrs would like to deаctivate it from their device. In this post, we will illustrate how to resume or suspend BitLocker encryption on Windows 11/10.

This security feature is easy to use, encrypts the hardware of the system, and is known for service the securing purpose very well. However, device encryption can become a problem for some users as it may slow down the computer. Sometimes the device encryption takes a longer period and most importantly it supports only when the system is compatible with encryption.

How to Resume or Suspend BitLocker encryption on Windows 11/10

Bitlocker is gaining popularity and is being increasingly used by modern devices to prevent data breaching. The data protected can be extracted from the hard drive of the system. It also allows the user to secure important data with the help of a password. Here in this tutorial, we will see how to resume or suspend BitLocker encryption on Windows 11/10.

1] Resume BitLocker encryption on Windows 11/10

If you want to resume the BitLocker encryption which you have earlier suspended on Windows 10 PC, then use the following suggestions:

1. At first, open the Control Panel window.
2. Click on System and Security section.
3. Scroll down and select the BitLocker Drive Encryption option.
4. Select the Resume protection option.

If you need, you can see the above steps in detail:

To get it started, open the Control Panel first. For this, click on Start, type Control Panel and press the Enter key.

Inside the Control Panel window, head over the System and Security option.

Next, scroll down, and click on the BitLocker Drive Encryption option.

Now under the operating system drive title, click on the Resume protection link to resume BitLocker encryption on Windows 10.

After that, restart your computer to complete the process.

Read: How to backup BitLocker Drive Encryption Recovery Key.

2] Suspend BitLocker encryption on Windows 11/10

BitLocker efficiently protects system data from cold boot attacks but its encryption may create problems in system updates and firmware. Therefore, many of you may like to suspend it temporarily. It is important to note that BitLocker suspension is not permanent and new data created after the suspension with stay encrypted until it is suspended again for data decryption.

To Suspend BitLocker encryption on your Windows PC, follow the below suggestions:

1. Open the Control Panel window.
2. Click on System and Security section.
3. Scroll down and select the BitLocker Drive Encryption option.
4. Select the Suspend protection option.
5. Click on the Yes button to continue.

Now let’s see the above steps in detail:

The suspension can be done using the control panel of your computer system. So, first of all, open the control panel and select the System and Security option. Now choose the BitLocker Drive Encryption option.

Inside the BitLocker window, click on the Suspend protection option that is available below the heading of your OS drive. Then click on the Yes button to confirm the changes. Restart your computer and check if it is done.

Kindly do note that, if you suspend the protection, your data will not be protected. Sometimes you may need to suspend BitLocker temporarily while updating Windows or PC’s firmware. So, if you forget to resume BitLocker protection, it will resume automatically the next time you restart your PC.

Related: How to change BitLocker Encryption method & Cipher Strength.

Related posts

• 如何在Windows 10中更改BitLocker PIN

• 太多PIN entry尝试Windows 10 BitLocker error

• 如何在File Explorer中展示Details pane在Windows 10

• 如何使用Windows 10的Charmap and Eudcedit内置工具

• 如何检查在Windows 10的Shutdown and Startup Log

• 如何在Windows 10 Control Panel中打开System Properties

• Windows 10中的Windows.edb file是什么？

• 如何在Windows 10卸载或重新安装Notepad

• 在Windows 10中使用DISM时，远程procedure call失败了错误

• 最佳Battery monitor，Analytics＆Stats应用程序Windows 10

• 如何在Windows 10中添加Trusted Site

• 如何添加或更改Time Server在Windows 10

• 视窗10同步设置不工作灰色

• 如何在Windows 10启用或Disable Archive Apps feature

• Mail and Calendar app freezes，崩溃或在Windows 11/10工作

• 如何在Windows 10上管理Data Usage Limit

• 如何使用Windows 10的Alarms and Clocks app

• Taskbar通知未显示在Windows 10中

• Fix Windows 10 Black Screen的Death问题; Black Screen上的Stuck

• Best免费Clipboard Manager software用于Windows 10