如果您遇到错误Windows已在您的计算机上检测到 IP 地址冲突，则这意味着同一网络上的另一台设备与您的 PC 具有相同的 IP 地址。主要问题似乎是您的计算机和路由器之间的连接；实际上，当只有一台设备连接到网络时，您可能会遇到此错误。您将收到的错误将说明以下内容：

Windows 检测到 IP 地址冲突^{(Windows has detected an IP address conflict)}

此网络上的另一台计算机与这台计算机具有相同的 IP 地址。请与您的网络管理员联系以获取解决此问题的帮助。Windows 系统事件日志中提供了更多详细信息。^{(Another computer on this network has the same IP address as this computer. Contact your network administrator for help resolving this issue. More details are available in the Windows System event log.)}

任何两台电脑都不应该在同一个网络上拥有相同的IP地址，否则它们将无法访问Internet，并且它们将面临上述错误。同一个网络上的相同IP地址会产生冲突，例如，如果您有两辆相同型号的汽车，并且车牌数量相同，您将如何区分它们？正是，这就是我们的计算机在上述错误中面临的问题。

值得庆幸的是，您可以通过多种方式解决Windows IP地址冲突，因此不要浪费任何时间，让我们看看如何使用下面列出的故障排除步骤解决此问题。

修复 Windows^{(Fix Windows)}的5种方法^(Ways)检测到IP 地址冲突 [已解决]

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

Method 1: Flush DNS and Reset TCP/IP

1.右键单击Windows按钮^{(Windows Button)}并选择“命令提示符（管理员）^{(Command Prompt(Admin))}。”

2. 现在输入以下命令并在每个命令后按Enter ：

ipconfig /release
ipconfig /flushdns
ipconfig /renew

3.再次^(Again)，打开Admin Command Prompt并键入以下内容，然后在每个之后按回车：

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

4. 重新启动以应用更改。刷新DNS似乎可以修复 Windows 检测到 IP 地址冲突错误。^{(fix Windows has detected an IP address conflict error.)}

方法二：重启路由器^{(Method 2: Restart your Router)}

如果您的路由器配置不正确，即使您已连接到WiFi^(WiFi)，您也可能无法访问互联网。您需要按下路由器上的Refresh/Reset button，或者您可以打开路由器的设置，在设置中找到重置选项。

1. 关闭 WiFi 路由器或调制解调器，然后拔下电源。

2. 等待 10-20 秒，然后再次将电源线连接到路由器。

3. 打开路由器并再次尝试连接您的设备。

另请阅读：^{(Also Read:)} 使用本指南查找路由器的 IP 地址。^{(Find the router’s IP address using this guide.)}

方法 3：禁用然后重新启用您的网络适配器^{(Method 3: Disable then Re-enable your network adapter)}

1. 按 Windows 键 + R，然后键入ncpa.cpl并按 Enter。

2. 右键单击​​您的无线适配器^{( wireless adapter)}并选择禁用。^(Disable.)

3. 再次右键单击同一个适配器^{(same adapter)}，这次选择启用。^{(choose Enable.)}

4. 重新启动并再次尝试连接到您的无线网络，看看您是否能够修复 Windows 检测到 IP 地址冲突。^{(fix Windows has detected an IP address conflict.)}

方法 4：删除您的静态 IP^{(Method 4: Remove your static IP)}

1. 打开控制面板^{(Control Panel)}并点击网络^(Network)和互联网^(Internet)。

2.接下来，单击网络和共享中心，^{(Network and Sharing Center,)} 然后单击 更改适配器设置。^{(Change adapter settings.)}

3. 选择您的 Wi-Fi，然后双击它并选择属性。^{(Properties.)}

4. 现在选择Internet Protocol Version 4 (TCP/IPv4) 并单击属性。

5.勾选“自动获取IP地址^{(Obtain an IP address automatically)}”和“自动获取DNS服务器地址”。^{(“Obtain DNS server address automatically.”)}

6.关闭^(Close)所有内容，您可能能够修复 Windows 检测到 IP 地址冲突错误。^{(fix Windows has detected an IP address conflict error.)}

方法 5：禁用 IPv6^{(Method 5: Disable IPv6)}

1. 右键单击​​系统托盘上的WiFi图标，然后单击“打开网络和共享中心”。^{(Open Network and Sharing Center.)}”

2. 现在 单击您当前的连接^{(click on your current connection)}以打开 设置。^(Settings.)

注意：^(Note:)如果您无法连接到您的网络，请使用以太网^(Ethernet)电缆进行连接，然后按照此步骤操作。

3. 在刚刚打开的窗口中单击 属性按钮^{(Properties button)} 。

4. 确保 uncheck Internet Protocol Version 6 (TCP/IP).

5.单击确定^{(Click OK)}，然后单击关闭^(Close)。重新启动^(Reboot)您的 PC 以保存更改。

受到推崇的：^{(Recommended:)}

• 修复 Internet Explorer 无法显示网页错误^{(Fix Internet Explorer cannot display the webpage error)}
• 在 Windows 中将 TrustedInstaller 还原为文件所有者^{(Restore TrustedInstaller as File Owner in Windows)}
• 修复 Windows 10 亮度设置不起作用^{(Fix Windows 10 Brightness Settings Not Working)}
• 修复 Windows 应用商店错误代码 0x8000ffff^{(Fix Windows Store Error Code 0x8000ffff)}

就是这样，您已成功 修复 Windows 已检测到 IP 地址冲突错误^{( Fix Windows has detected an IP address conflict error)}如果您对此帖子仍有任何疑问，请随时在评论部分询问他们。

Fix Windows has detected an IP address conflict

Іf you face the error Windows has detected an IP address conflict on your computer then this means anothеr dеvicе on the same network has the same IP address as your PC. The main issue seems to be the connection between your сomputer and the router; in fact, you can face this error when only one device is connected to the network. The error which you will receive will stаte the following:

Windows has detected an IP address conflict

Another computer on this network has the same IP address as this computer. Contact your network administrator for help resolving this issue. More details are available in the Windows System event log.

No two computers should have the same IP address on the same network, if they do, they won’t be able to access the Internet, and they will face the above error. Having the same IP address on the same network creates a conflict, for example, if you have two cars of the same model and have the same number of plates, how will you distinguish between them? Exactly, this is the problem which our computer is facing in the above error.

Thankfully there are various ways by which you can resolve Windows IP address conflict, so without wasting any time, let’s see how to fix this issue with the below-listed troubleshooting steps.

5 Ways to Fix Windows has detected an IP address conflict [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Method 1: Flush DNS and Reset TCP/IP

1. Right-click on Windows Button and select “Command Prompt(Admin).”

2. Now type the following command and press Enter after each one:

ipconfig /release
ipconfig /flushdns
ipconfig /renew

3. Again, open Admin Command Prompt and type the following and hit enter after each one:

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

4. Reboot to apply changes. Flushing DNS seems to fix Windows has detected an IP address conflict error.

Method 2: Restart your Router

If your router is not configured properly, you may not be able to access the internet even though you’re connected to WiFi. You need to press the Refresh/Reset button on your router, or you can open the settings of your router locate the reset option in setting.

1. Turn off your WiFi router or modem, then unplug the power source from it.

2. Wait for 10-20 seconds and then again connect the power cable to the router.

3. Switch on the router and again try to connect your device.

Also Read: Find the router’s IP address using this guide.

Method 3: Disable then Re-enable your network adapter

1. Press Windows Key + R then type ncpa.cpl and hit Enter.

2. Right-click on your wireless adapter and select Disable.

3. Again right-click on the same adapter and this time choose Enable.

4. Restart your and again try to connect to your wireless network and see if you’re able to fix Windows has detected an IP address conflict.

Method 4: Remove your static IP

1. Open Control Panel and click on Network and Internet.

2. Next, click Network and Sharing Center, then click on Change adapter settings.

3. Select your Wi-Fi then double click on it and select Properties.

4. Now select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

5. Checkmark “Obtain an IP address automatically” and “Obtain DNS server address automatically.”

6. Close everything, and you may be able to fix Windows has detected an IP address conflict error.

Method 5: Disable IPv6

1. Right-click on the WiFi icon on the system tray and then click on “Open Network and Sharing Center.”

2. Now click on your current connection to open Settings.

Note: If you can’t connect to your network, then use an Ethernet cable to connect and then follow this step.

3. Click the Properties button in the window that just open.

4. Make sure to uncheck Internet Protocol Version 6 (TCP/IP).

5. Click OK, then click Close. Reboot your PC to save changes.

Recommended:

• Fix Internet Explorer cannot display the webpage error
• Restore TrustedInstaller as File Owner in Windows
• Fix Windows 10 Brightness Settings Not Working
• Fix Windows Store Error Code 0x8000ffff

That’s it you have successfully Fix Windows has detected an IP address conflict error if you still have any queries regarding this post feel free to ask them in the comment’s section.

Related posts

• Fix Windows无法与device or resource通信

• Fix Windows无法完成格式

• Fix Windows无法完成所要求的更改

• Fix Windows找不到Steam.exe error

• Fix Windows无法启动。最近的hardware or software change可能是原因

• Fix Windows已停止此设备，因为它已有问题（Code 43）

• 由于Hardware问题，Fix Windows freezing或重新启动

• error 0x807800C5失败了Fix Windows Backup

• Windows Fix Host Process Windows Services已停止工作

• Fix Error 651：调制解调器（或其他连接设备）报告了错误

• Fix Windows无法安装Required Files 0x80070570

• Fix Computer直到重新启动多次

• Fix Computer Wo在Windows 10中没有转到Sleep Mode

• Fix Windows的本副本不是真正的错误

• Device Manager中的Fix Network Adapter Error Code 31

• 9 Ways到Fix Twitter Videos不玩

• Fix Error 0X80010108在Windows 10中

• Fix Windows 7更新未下载

• Fix Universal Serial Bus（USB）Controller Driver Issue

• Windows 10中的Fix Task Host Window Prevents Shut Down