许多 PC 用户通过无线适配器连接互联网。实际上，大多数笔记本电脑用户通过无线适配器在他们的设备上访问互联网。如果您在Windows上的无线适配器开始给您带来问题怎么办？是的，许多用户报告说，在通过无线适配器访问互联网时，他们遇到了麻烦。他们在与无线适配器连接时收到错误消息。在本文中，我们将讨论这个问题的可能解决方案。
修复(Fix Problem)Windows 10上的无线适配器(Wireless Adapter)或接入点问题(Access Point)
确保 创建一个还原点(create a restore point)以防万一出现问题。
方法一：有线连接(Method 1: Connect via Wired Connection)
将笔记本电脑与有线连接连接到互联网会扼杀氛围，这是完全可以理解的，虽然不是对所有人但对某些人来说确实如此。但是，如果您无法使用WiFi访问互联网，最好的选择是尝试通过有线连接连接到互联网。(Internet)您只需使用LAN电缆将笔记本电脑连接到路由器即可。这可能能够解决您的问题，并且您将恢复互联网连接。
方法 2：删除您当前的 Wi-Fi 配置文件(Method 2: Remove your current Wi-Fi profile)
由于无线配置文件损坏，您可能无法访问互联网。如果这是问题，那么它可能会导致无线适配器或接入点出现问题。因此，您需要删除当前的无线或WLAN配置文件，或者忘记当前的 Wi-Fi 网络。现在有 3 种方法可供您使用，请使用本指南遵循其中一种方法(this guide to follow one of them)。
方法3：确保使用正确的密码(Method 3: Make sure to use the correct Password)
无线适配器或接入点最常见的问题之一是没有输入正确的密码。您可能不小心输入了错误的密码，因此建议您仔细检查您输入的密码是否正确以访问WiFi。你(Did)检查过键盘吗？是的，有时可能无法插入键盘的特定键，因此您将无法插入正确的密码。让我们尝试使用屏幕键盘输入正确的密码( On-screen keyboard to enter the correct password)并检查您是否能够连接到互联网。
方法 4：启用无线适配器(Method 4: Enable Wireless Adapter)
有时，由于系统上安装了任何第三方软件，无线适配器会被禁用。您需要检查设置以确保它未被禁用：
1.您需要打开设备管理器(Device Manager)。按Windows Key + X并选择设备管理器。(Device Manager.)
2.在设备管理器下，展开网络适配器。 (Network Adapters. )
3.接下来，双击您的无线适配器设备以打开其属性(Properties)窗口。
4.导航到驱动程序选项卡(Driver tab)并查找启用(Enable)按钮。如果您没有看到“启用(Enable)”按钮，则表示无线适配器已启用。
方法5：重置无线路由器(Method 5: Reset Wireless Router)
如果您的路由器配置不正确，您可能会在设备上收到有关无线适配器的错误消息。您只需要按路由器上的刷新(Refresh)按钮，或者您可以打开路由器的设置，在设置中找到重置选项。
1.关闭WiFi路由器或调制解调器，然后拔下电源。
2.等待10-20秒，然后重新将电源线连接到路由器。
3.打开路由器并再次尝试连接您的设备，看看是否解决了无线适配器或接入点的问题。(Fix Problem with wireless adapter or access point.)
方法 6：打开路由器的 WMM 选项(Method 6: Turn on WMM option for your router)
这是解决Windows 10(Windows 10)上的无线适配器或接入点问题的另一种解决方法。然而，这似乎有点奇怪的解决方案，但许多用户报告他们用这种方法解决了他们的无线适配器问题。
1.按 Windows 键 + R 然后键入devmgmt.msc并按Enter打开设备管理器(Device Manager)。
2.现在展开网络适配器(Network Adapter)部分。它将打开系统上安装的所有网络适配器的列表。在这里，您需要右键单击您的无线网络适配器并选择属性。(Properties.)
3.您需要导航到高级选项卡(Advanced tab) 并找到WMM 选项。( WMM option.)
4. 选择WMM 选项(WMM option)，然后从值(Value)下拉列表中选择启用。 ( Enabled. )
希望(Hopefully)现在您可以通过无线(Wireless)适配器获得互联网连接。
方法 7：更新网络驱动程序(Method 7: Update Network Drivers)
1.按Windows键+R，在运行对话框中输入“ devmgmt.msc ”打开(devmgmt.msc)设备管理器。(device manager.)
2.展开网络适配器(Network adapters)，然后右键单击您的Wi-Fi 控制器( Wi-Fi controller)（例如Broadcom或Intel）并选择更新驱动程序。(Update Drivers.)
3.在更新驱动程序软件窗口(Update Driver Software Windows)中，选择“浏览我的电脑以查找驱动程序软件。(Browse my computer for driver software.)“
4.现在选择“让我从计算机上的设备驱动程序列表中选择。(Let me pick from a list of device drivers on my computer.)“
5.尝试从列出的版本更新驱动程序。(update drivers from the listed versions.)
6.如果上述方法不起作用，请到制造商的网站(the manufacturer’s website)更新驱动程序：https://downloadcenter.intel.com/
7.重新启动以应用更改。
Method 8: Flush DNS and Reset TCP/IP
1.右键单击Windows按钮(Windows Button)并选择“命令提示符（管理员）。(Command Prompt(Admin).)“
2.现在键入以下命令并在每个命令后按Enter ：
ipconfig /release
ipconfig /flushdns
ipconfig /renew
3.再次打开管理命令提示符(Admin Command Prompt)并键入以下内容并在每个之后按回车键：
ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset
4.重新启动以应用更改。刷新DNS似乎可以 解决无线适配器或接入点的问题。(Fix the Problem with wireless adapter or access point.)
方法九：暂时禁用杀毒软件(Method 9: Temporarily disable Antivirus software)
有时防病毒(Antivirus)程序可能会导致网络适配器驱动程序问题(Network Adapter Driver issue) ，为了验证这里不是这种情况，您需要在有限的时间内禁用您的防病毒软件，以便您可以检查当防病毒软件关闭时错误是否仍然出现。
1.右键单击系统托盘中的防病毒程序图标( Antivirus Program icon)，然后选择禁用。(Disable.)
2.接下来，选择防病毒软件将保持禁用的时间范围。( Antivirus will remain disabled.)
注意：选择尽可能少的时间，例如 15 分钟或 30 分钟。
3.完成后，再次尝试连接到WiFi网络并检查错误是否解决。
方法10：启用无线网络相关服务(Method 10: Enable Wireless Network Related Services)
1.按 Windows 键 + R 然后键入services.msc并按 Enter。
2.现在确保以下服务已启动，并且它们的启动(Startup)类型设置为自动(Automatic)：
DHCP 客户端(DHCP Client)
网络连接设备自动设置(Network Connected Devices Auto-Setup)
网络连接代理(Network Connection Broker)
网络连接(Network Connections)
网络连接助手(Network Connectivity Assistant)
网络列表服务(Network List Service)
网络位置感知(Network Location Awareness)
网络设置服务(Network Setup Service)
网络存储接口服务(Network Store Interface Service)
WLAN AutoConfig
3.右键单击它们并选择属性。(Properties.)
4.确保启动(Startup)类型设置为自动(Automatic)，如果服务未运行，请单击启动。(Start)
5.单击应用，然后单击确定。
6.重新启动您的 PC 以保存更改。
受到推崇的：(Recommended:)
我希望在上述步骤的帮助下，您能够解决无线适配器或接入点的问题。( Fix the Problem with wireless adapter or access point.) 如果您对本指南仍有任何疑问，请随时在评论部分提出。
Fix The Problem with Wireless Adapter or Access Point
Many PC users connect their internet via wireless adapters. Practically, the majority of laptop υsers access the intеrnet on their devices via wireless adapters. What if your wireless adapter on Windows starts causing a problem for you? Yes, many users reported that while accessing thе internet via wireless adapter theу encounter trouble. They get an error message whіle conneсting with the wireless adapter. In this аrticle, we will discuss probable sоlutions to this problem.
Fix Problem with Wireless Adapter or Access Point on Windows 10
Make sure to create a restore point just in case something goes wrong.
Method 1: Connect via Wired Connection
It is quite understandable that connecting the laptop with a wired connection for the internet kills the vibe, well not for everyone but for some people it does. But if you’re not able to access the internet using the WiFi, the best alternative is to try to connect to the Internet via a wired connection. You just need to connect your laptop to the router with the LAN cable. This may be able to solve your issue and you will get the internet connectivity back.
Method 2: Remove your current Wi-Fi profile
You may not able to access the internet because of the corrupted wireless profile. If this is the issue then it can cause the problem with wireless adapter or access point. So you need to either remove your current wireless or WLAN profile or forget the current Wi-Fi network. Now there are 3 ways via which you can do, use this guide to follow one of them.
Method 3: Make sure to use the correct Password
One of the most common problems with wireless adapter or access point is not entering the right password. You may accidentally be entering the wrong password therefore, it is recommended to double-check that you are entering the right password to access WiFi. Did you check the keyboard? Yes, sometimes particular keys of your keyboard may not be inserted due to which you would not be able to insert right password. Let’s try On-screen keyboard to enter the correct password and check if you are able to connect with the internet.
Method 4: Enable Wireless Adapter
Sometimes the wireless adapter gets disabled due to installing of any third-party software on your system. You need to check the settings to ensure that it is not disabled:
1.You need to open Device Manager. Press Windows Key + X and choose Device Manager.
2.Under Device Manager, expand Network Adapters.
3.Next, double-click on your wireless adapter device to open its Properties window.
4.Navigate to the Driver tab and look for the Enable button. If you don’t see the Enable button, then it means the wireless adapter is already enabled.
Method 5: Reset Wireless Router
If your router is not configured properly, you may get the error message on your device regarding wireless adapter. You just need to press the Refresh button on your router or you can open the settings of your router locate the reset option in setting.
1.Turn off your WiFi router or modem, then unplug the power source from it.
2.Wait for 10-20 seconds and then again connect the power cable to the router.
3.Switch on the router and again try to connect your device and see if this Fix Problem with wireless adapter or access point.
Method 6: Turn on WMM option for your router
This is another workaround to fix the problem with wireless adapter or access point on Windows 10. However, it seems a bit weird solution but many users reported that they solved their wireless adapter problem with this method.
1.Press Windows key + R then type devmgmt.msc and hit Enter to open Device Manager.
2.Now expand the Network Adapter section. It will open a list of all network adapters installed on your system. Here you need to right-click on your wireless network adapter and select Properties.
3.You need to navigate to the Advanced tab and locate the WMM option.
4.Select the WMM option then from the Value drop-down select Enabled.
Hopefully, now you will be able to get internet connection via your Wireless adapter.
Method 7: Update Network Drivers
1.Press Windows key + R and type “devmgmt.msc” in Run dialogue box to open device manager.
2.Expand Network adapters, then right-click on your Wi-Fi controller(for example Broadcom or Intel) and select Update Drivers.
3.In the Update Driver Software Windows, select “Browse my computer for driver software.“
4.Now select “Let me pick from a list of device drivers on my computer.“
5.Try to update drivers from the listed versions.
6.If the above didn’t work then go to the manufacturer’s website to update drivers: https://downloadcenter.intel.com/
7.Reboot to apply changes.
Method 8: Flush DNS and Reset TCP/IP
1.Right-click on Windows Button and select “Command Prompt(Admin).“
2.Now type the following command and press Enter after each one:
ipconfig /release
ipconfig /flushdns
ipconfig /renew
3.Again open Admin Command Prompt and type the following and hit enter after each one:
ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset
4.Reboot to apply changes. Flushing DNS seems to Fix the Problem with wireless adapter or access point.
Method 9: Temporarily disable Antivirus software
Sometimes the Antivirus program can cause the Network Adapter Driver issue and in order to verify this is not the case here, you need to disable your antivirus for a limited time so that you can check if the error still appears when the antivirus is off.
1.Right-click on the Antivirus Program icon from the system tray and select Disable.
2.Next, select the time frame for which the Antivirus will remain disabled.
Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.
3.Once done, again try to connect to the WiFi network and check if the error resolves or not.
Method 10: Enable Wireless Network Related Services
1.Press Windows Key + R then type services.msc and hit Enter.
2.Now make sure the following services are started and their Startup type is set to Automatic:
DHCP Client
Network Connected Devices Auto-Setup
Network Connection Broker
Network Connections
Network Connectivity Assistant
Network List Service
Network Location Awareness
Network Setup Service
Network Store Interface Service
WLAN AutoConfig
3.Right-click on each of them and select Properties.
4.Make sure the Startup type is set to Automatic and click Start if the service is not running.
5.Click Apply followed by OK.
6.Reboot your PC to save changes.
Recommended:
I hope with the help of the above steps you were able to Fix the Problem with wireless adapter or access point. If you still have any questions regarding this guide then feel free to ask them in the comments section.
