如果您在Windows 10设备管理器中遇到错误消息(Device Manager)Windows 无法识别(Windows cannot identify all the resources)代码 16(Code 16)的所有资源,那么您来对地方了。在这篇文章中,我们将介绍您可以尝试成功解决此问题的解决方案。
当你遇到这个问题。您将收到以下完整的错误消息;
Windows cannot identify all the resources this device uses. To specify additional resources for this device, click the Resources tab and fill in the missing settings. Check your hardware documentation to find out what settings to use. (Code 16)
Windows 无法识别所有资源(代码(Code))
一次执行太多任务时可能会出现驱动程序错误。通常,该问题发生在启动或关闭、尝试安装程序甚至在安装Windows期间。有时,当Windows(Windows)未正确配置外部硬盘驱动器或打印机等外围设备时,会发生错误。
如果您遇到此问题,您可以尝试以下我们推荐的解决方案(不分先后顺序),看看是否有助于解决问题。
- 解决资源冲突
- 卸载并重新安装设备
问题是有问题的设备只是部分配置,可能需要管理员手动配置设备正常运行所需的资源。也就是说,如果设备是即插即用设备,请按照以下步骤操作:
1]解决资源冲突
问题是有问题的设备只是部分配置,可能需要管理员手动配置设备正常运行所需的资源。也就是说,如果设备是即插即用设备,请执行以下操作:
- 按Windows key + X打开高级用户菜单(Power User Menu)。
- 点击键盘上的M键打开设备管理器(open Device Manager)。
- 设备管理器(Device Manager)打开后,双击确定有问题的设备。
- 右键单击(Right-click)它,然后选择 Properties。
- 在属性窗口中,单击资源(Resource) 选项卡。
- 在“资源设置”(Resource Settings)列表中,检查资源旁边是否有问号。如果是这样,请选择该资源,并将其分配给设备。
如果无法更改资源,请单击更改设置(Change Settings)。如果更改设置(Change Settings)不可用,请尝试清除使用自动设置(Use automatic settings)复选框以使其可用。
如果设备不是即插即用设备(Play Device),您需要查看设备文档或联系设备制造商以获取更多信息。该手册将帮助您找出需要分配给设备的资源。
2]卸载(Uninstall)并重新安装设备
此问题的解决方案要求您卸载有冲突的驱动程序,重新启动计算机,并允许Windows检测系统目录中的该驱动程序并安装它。
请执行下列操作:
- 打开设备管理器。
- 在设备管理器(Device Manager)中,找到故障设备。
- 找到后,右键单击设备,然后单击卸载设备。(Uninstall device.)
屏幕上会弹出一个警告框,接受它。在删除此设备的驱动程序软件之前选中该复选框。
系统重新启动后,Windows将自动检测并重新安装设备驱动程序。
阅读: (Read)Windows 10上所有设备管理器错误代码(Device Manager Error Codes)的完整列表以及解决方案。
希望这可以帮助!
Windows cannot identify all the resources this device uses (Code 16)
If yoυ’re encountering the error message Windows cannot identify all the resources with Code 16 in your Windows 10 Device Manager, then you’re at the right place. In this post, we will present the solutions you can try to successfully resolve this issue.
When you encounter this issue. you’ll receive the following full error message;
Windows cannot identify all the resources this device uses. To specify additional resources for this device, click the Resources tab and fill in the missing settings. Check your hardware documentation to find out what settings to use. (Code 16)
Windows cannot identify all the resources (Code)
The driver error may appear when executing too many tasks at a time. Commonly, the issue occurs during startup or shutdown, attempting to install a program or even during the installation of Windows. Sometimes, when a peripheral device like an external hard drive or a printer is not appropriately configured by Windows the error happens.
If you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.
- Resolve resource conflict
- Uninstall and reinstall the device
The problem is that the device in question is only partially configured, and might need the admin to manually configure the resources the device needs to operate properly. That said if the device is a plug and play device, follow the steps below:
1] Resolve resource conflict
The problem is that the device in question is only partially configured, and might need the admin to manually configure the resources the device needs to operate properly. That said if the device is a plug and play device, do the following:
- Press Windows key + X to open the Power User Menu.
- Tap M key on the keyboard to open Device Manager.
- Once the Device Manager opens, identify the problematic device by double-clicking.
- Right-click the same and then select Properties.
- In the properties window, click the Resource tab.
- In the Resource Settings list, check to see if there is a question mark next to a resource. If so, select that resource, and assign it to the device.
In case a resource cannot be changed, click Change Settings. If Change Settings is unavailable, try to clear the Use automatic settings checkbox to make it available.
If the device is not a Plug and Play Device, You will need to check with the device documentation or contact the device manufacturer for more information. The manual will help you to figure out the resources you need to assign to the device.
2] Uninstall and reinstall the device
This solution to the issue requires you to uninstall the conflicting driver, reboot your computer, and allow Windows to detect that driver in the system directory and install it.
Do the following:
- Open Device Manager.
- In Device Manager, find the faulty device.
- Once found, right-click on the device, and click Uninstall device.
A warning box will pop-up on the screen, accept it. Select the checkbox before deleting the driver software for this device.
- Restart your computer after completion of the uninstallation process.
Once your system restarts, Windows will automatically detect and reinstall the device driver.
Read: Complete list of all Device Manager Error Codes on Windows 10 along with solutions.
Hope this helps!