通过蓝牙将(Bluetooth)Android手机连接到Windows 10笔记本电脑是使用蓝牙(Bluetooth)网络共享在两台设备之间传输文件或共享互联网连接所需的第一步。今天的每部Android手机都支持蓝牙(Bluetooth),因此可以方便地使用流行的技术将智能手机与Windows 10设备配对。本教程说明了如何在Windows 10中通过(Windows 10)蓝牙将(Bluetooth)Android手机连接到笔记本电脑、PC 或平板电脑:
注意:(NOTE:)提供的功能在Windows 10 October 2020 更新(Windows 10 October 2020 Update)或更新版本中可用。如果您使用的是旧版本的Windows 10,您可能无法访问所有功能。本指南适用于 Android 10,它是使用诺基亚 5.3(Nokia 5.3)和三星 Galaxy A51(Samsung Galaxy A51)创建的。尽管您可能会遇到一些小的差异,但取决于您的设备制造商,这些过程在大多数 Android 设备上是相似的。如果您使用的是三星(Samsung)智能手机并遇到困难,请不要错过本指南末尾的专门章节。
首先(First)要做的事:关于通过蓝牙将(Bluetooth)Android手机连接到Windows 10
蓝牙(Bluetooth)可能不是最快或最可靠的无线技术,但它仍然是互连各种计算设备的最广泛使用的方法之一。虽然您也可以使用 USB 数据线将 Android 智能手机连接到您的 Windows 10 PC(use a USB cable to connect an Android smartphone to your Windows 10 PC),但我们认为通过蓝牙(Bluetooth)配对更方便,原因有很多:
- 每部Android智能手机、许多 PC 和大多数笔记本电脑都具有蓝牙(Bluetooth)功能
- 您的 Windows 10 计算机、笔记本电脑或平板电脑上不需要电缆或空闲的USB端口(USB)
- 您可以同时从不同来源为您的Android智能手机充电(Android)
- 如果您愿意,您可以将您的Android智能手机放在抽屉或包中
通过蓝牙(Bluetooth)将手机连接到 PC ,您可以将文件从 Android 发送到 Windows 10(send files from an Android to Windows 10),启用蓝牙网络共享,并使用智能手机自动锁定 Windows 10(automatically lock Windows 10 with your smartphone)。
这个过程并不复杂,只要您按照接下来的步骤操作即可。
步骤 1.在Windows 10中启用蓝牙(Bluetooth)
第一步是确保在您的 Windows 10 计算机或设备上启用蓝牙。(Bluetooth)有几种方法可以在 Windows 10 中启用蓝牙,(several ways to enable Bluetooth in Windows 10)从设置(Settings)中激活它就是其中之一。按键盘上的Windows + I打开设置应用程序并访问(Open the Settings app)设备(Devices)。这将打开“蓝牙和其他设备”(“Bluetooth & other devices”)选项卡,您应该在其中看到右侧的蓝牙开关。(Bluetooth)如果蓝牙(Bluetooth)已关闭(Off),请单击或点击其开关以将其打开(On)。
在 Windows 10 中启用蓝牙
只要您保持蓝牙设置打开,其他使用(Bluetooth)蓝牙(Bluetooth)的设备就可以发现您的 Windows 10 PC 。
重要提示:(IMPORTANT:)如果您在“设置”(Settings)应用中看不到开关,则您的 Windows 10 计算机或设备可能没有内置蓝牙(Bluetooth)芯片。因此,除非您添加蓝牙(Bluetooth)适配器,否则您无法建立蓝牙连接,例如(Bluetooth)这个(this one)。
第 2 步。在您的Android设备上启用蓝牙(Bluetooth)
在Windows 10中启用蓝牙(Bluetooth)后,您必须在要连接的Android智能手机或平板电脑上执行相同操作。(Android)在 Android 上启用蓝牙(ways to enable Bluetooth on Android)的所有方法中,我们认为使用“快速设置”菜单(Quick Settings menu)是最简单的。从屏幕顶部向下滑动(Swipe),您应该会在Android上显示的快速设置中看到(Quick Settings)蓝牙(Bluetooth)图标。如果它被禁用,请点击它以启用它。
在 Android 上启用蓝牙
重要提示:(IMPORTANT:)请记住,出于安全原因,某些智能手机和平板电脑仅在蓝牙(Bluetooth)设置打开时对其他设备可见。要访问它们,请按住快速设置(Quick Settings)菜单中显示的蓝牙(Bluetooth)选项。
第 3 步。通过蓝牙将您的(Bluetooth)Android手机连接到Windows 10笔记本电脑、PC 或平板电脑
在两台设备上启用蓝牙(Bluetooth)后,返回Windows 10中的(Windows 10)蓝牙(Bluetooth)设置,然后单击或点击顶部的“添加蓝牙或其他设备”(“Add Bluetooth or other device”)按钮。
添加蓝牙(Add Bluetooth)或其他设备以将手机连接到笔记本电脑
在“添加设备”(“Add a device”)窗口中,单击或点击第一个选项:蓝牙(Bluetooth)。
提示:(TIP:) “添加设备”( “Add a device”)向导用于将所有类型的蓝牙设备连接到您的 Windows 10 笔记本电脑、PC 或平板电脑(connecting all types of Bluetooth devices to your Windows 10 laptop, PC, or tablet)。
(Choose Bluetooth)在添加(Add)设备向导中选择蓝牙
您的 Windows 10 电脑开始搜索附近的蓝牙(Bluetooth)设备。给它最多 30 秒的时间来完成扫描并发现所有可用的选项。不要(Don)忘记保持蓝牙(Bluetooth)设置打开,如前一章所述。一旦找到您的Android智能手机,单击或点击其名称即可开始配对。
在可以连接到Windows 10(Windows 10)的设备列表中找到您的手机
这会提示您的手机和计算机开始连接。不久之后,Windows 10向导会显示一个六位数的代码,该代码也应该出现在您的Android智能手机的弹出窗口中。确保(Make)两个代码匹配以避免连接到错误的设备,然后单击或点击Windows 10 中的连接(Connect)以继续。
如果您正在配对的设备显示相同的代码,请按连接(Connect)
之后,立即从您的Android智能手机或平板电脑的弹出窗口中点击“配对”按钮。(Pair)
除非您快速执行此操作,否则Windows 10(Windows 10) PC 和您的手机之间的连接可能会过期。如果发生这种情况,配对将失败,您必须重试。
正如您在下面看到的,您的Android设备上显示的提示在所有设备上并不相同。根据您的手机,您可能还可以选择“允许访问您的联系人和通话记录”(“Allow access to your contacts and call history”) ——就像我们在诺基亚(Nokia)上所做的那样。如果您使用的是三星 Galaxy(Samsung Galaxy)设备,则应按OK而不是Pair。
(Press Pair)在Android(Android)上尽快按 Pair或 OK
如果一切正常,您的 Windows 10 计算机现在已配对并连接到您的Android智能手机或平板电脑。按完成(Done)关闭向导。
您的手机已成功连接到您的 Windows 10 笔记本电脑或 PC
这里的所有都是它的。您的手机和 PC 已连接,您可以开始使用Windows 10和Android之间的(Android)蓝牙(Bluetooth)连接。
奖励:如果Windows 10没有找到或发现您的三星 Galaxy(Samsung Galaxy)设备怎么办
正如我们之前所说,蓝牙(Bluetooth)不是最可靠的技术,因此您可能会遇到一些问题。虽然Windows 10(Windows 10)确实需要相当长的时间才能找到我们的诺基亚(Nokia)设备,但当我们开始编写本教程时,我们根本无法找到我们的三星 Galaxy(Samsung Galaxy)。
如果您遇到同样的问题,请尝试以下操作:
- (Turn Bluetooth)在Samsung Galaxy(Samsung Galaxy)和Windows 10上关闭并重新打开蓝牙。
- 重新启动(Restart)两台设备,并确保您安装了适用于Windows 10和Android的最新更新。
- 重置(Reset)网络设置。由于这是我们的三星 Galaxy(Samsung Galaxy)被发现的原因,我们进一步详细介绍了该过程。
- 更新Windows 10 笔记本电脑或 PC 上的蓝牙驱动程序。(Bluetooth)尝试您的计算机制造商的技术支持站点,并查找特定于您的型号的驱动程序。
要重置Samsung Galaxy设备上的网络设置,请打开设置(Settings),向下滚动,然后访问常规管理(General management)。然后,点击重置(Reset)。
(Press Reset)在三星 Galaxy(Samsung Galaxy)手机的常规(General)管理设置中按重置
从可用选项中按“重置网络设置” 。(“Reset network settings”)
在三星 Galaxy(Samsung Galaxy)上重置网络设置
接下来,按唯一可用的选项Reset settings。
注意:(NOTE:)这会重置三星 Galaxy(Samsung Galaxy)设备上的所有网络设置,因此请确保先保存所有重要信息,例如Wi-Fi密码。
(Tap Reset)点击三星 Galaxy上的(Samsung Galaxy)重置设置
通过在下一页上再次按“重置(Reset)”确认您的选择,一旦完成,您应该会在三星 Galaxy(Samsung Galaxy)手机上收到“网络设置重置”(“Network settings reset”)消息。您现在可以返回第 2 步(Step 2)并继续按照教程将手机连接到您的笔记本电脑、PC 或平板电脑。
提示:(TIP:)如果您仍然无法将Samsung Android连接到Windows 10计算机,您可以尝试不同的方法。三星 Galaxy(Samsung Galaxy)设备有自己的内置功能,可将它们与Windows 10配对,您可以从我们的关于(Windows 10)您的手机伴侣 - 链接到 Windows(Your Phone Companion – Link to Windows)的教程中了解如何使用它将手机与笔记本电脑或 PC连接。
你(Did)把你的安卓(Android)连接到你的电脑了吗?是启用蓝牙(Bluetooth)网络共享还是其他?
既然您已设法通过蓝牙(Bluetooth)将手机连接到笔记本电脑,您应该知道连接会保持活动状态,直到您禁用蓝牙(Bluetooth)或关闭、取消配对或将两个设备之一移出范围。在您关闭本教程之前,我们很好奇您为什么将Android连接到 Windows 10 计算机。是共享文件、启用蓝牙(Bluetooth)网络共享还是其他?请在下面的评论中告诉我们。
Connect an Android phone to a Windows 10 laptop or PC via Bluetooth -
Connecting an Android phone to a Windows 10 laptop through Blυetоoth is a first step required to tranѕfer files or share the internet connection bеtween the two devices usіng Bluetooth tethering. Every Android mobile todаy supports Bluеtooth, so it’s сonvenient using the popυlar technology to рair your smartphone with your Windоws 10 device. This tutorial illustrates how to connect an Android phone to a laptop, PC, or tablet via Bluetooth in Windows 10:
NOTE: The features presented are available in Windows 10 October 2020 Update or newer. If you are using an older version of Windows 10, you might not have access to all the features. This guide applies to Android 10, and it was created using a Nokia 5.3 and a Samsung Galaxy A51. The procedures are similar on most Android-powered devices, although you might come across some small differences, depending on your device’s manufacturer. If you’re using a Samsung smartphone and you encounter difficulties, don’t miss the dedicated chapter at the end of this guide.
First things first: About connecting an Android phone to Windows 10 via Bluetooth
Bluetooth may not be the fastest or most reliable wireless technology, but it is still one of the most widely used methods of interconnecting various computing devices. While you can also use a USB cable to connect an Android smartphone to your Windows 10 PC, pairing them via Bluetooth is more convenient in our opinion, for a number of reasons:
- Every Android smartphone, many PCs, and most laptops have Bluetooth capabilities
- You don’t need cables or a free USB port on your Windows 10 computer, laptop, or tablet
- You can charge your Android smartphone at the same time from a different source
- If you like, you can keep your Android smartphone out of sight, in a drawer or a bag
Connecting a phone to PC via Bluetooth lets you send files from an Android to Windows 10, enable Bluetooth tethering, and automatically lock Windows 10 with your smartphone.
The process is not complicated, as long as you follow the next steps.
Step 1. Enable Bluetooth in Windows 10
The first step is making sure that Bluetooth is enabled on your Windows 10 computer or device. There are several ways to enable Bluetooth in Windows 10, and activating it from Settings is one of them. Open the Settings app by pressing Windows + I on your keyboard and access Devices. This opens the “Bluetooth & other devices” tab, where you should see the Bluetooth switch on the right. If Bluetooth is turned Off, click or tap on its switch to turn it On.
Enable Bluetooth in Windows 10
As long as you keep the Bluetooth settings open, your Windows 10 PC can be discovered by other devices using Bluetooth.
IMPORTANT: If you don’t see a switch in the Settings app, your Windows 10 computer or device might not have a built-in Bluetooth chip. As a result, you cannot make a Bluetooth connection unless you add a Bluetooth adapter, like this one.
Step 2. Enable Bluetooth on your Android device
After enabling Bluetooth in Windows 10, you must do the same on the Android smartphone or tablet you’re connecting it to. Out of the ways to enable Bluetooth on Android, we think it’s easiest to use the Quick Settings menu. Swipe down from the top of your screen, and you should see the Bluetooth icon among the Quick Settings displayed on your Android. If it’s disabled, tap on it to enable it.
Enable Bluetooth on Android
IMPORTANT: Keep in mind that, for security reasons, some smartphones and tablets are visible to other devices only when the Bluetooth settings are open. To access them, touch and hold the Bluetooth option displayed in the Quick Settings menu.
Step 3. Connect your Android phone to a Windows 10 laptop, PC, or tablet through Bluetooth
After enabling Bluetooth on both devices, go back to Bluetooth settings in Windows 10 and click or tap the “Add Bluetooth or other device” button on top.
Add Bluetooth or other device to connect phone to laptop
In the “Add a device” window, click or tap on the first option: Bluetooth.
TIP: The “Add a device” wizard is used for connecting all types of Bluetooth devices to your Windows 10 laptop, PC, or tablet.
Choose Bluetooth in the Add a device wizard
Your Windows 10 PC starts searching for nearby Bluetooth devices. Give it up to 30 seconds to complete the scan and discover all the available options. Don’t forget to keep the Bluetooth settings open, as discussed in the previous chapter. As soon as it finds your Android smartphone, click or tap on its name to start pairing.
Find your phone in the list of devices you can connect to Windows 10
This prompts both your phone and computer to begin connecting. Shortly after, the Windows 10 wizard displays a six-digit code, which should also appear in a pop-up window on your Android smartphone. Make sure the two codes match to avoid connecting to the wrong device, and then click or tap Connect in Windows 10 to continue.
If the devices you are pairing show the same code, press Connect
Immediately after that, tap on the Pair button from the pop-up on your Android smartphone or tablet.
Unless you do this quickly, the connection between the Windows 10 PC and your phone might expire. If that happens, the pairing fails, and you must try again.
As you can see below, the prompt displayed on your Android device is not the same on all devices. Depending on your phone, you might also have the option to “Allow access to your contacts and call history” - as we do on our Nokia. If you’re using a Samsung Galaxy device, you should press OK instead of Pair.
Press Pair or OK as fast as possible on Android
If everything worked well, your Windows 10 computer is now paired and connected to your Android smartphone or tablet. Press Done to close the wizard.
Your phone was successfully connected to your Windows 10 laptop or PC
That’s all there is to it. Your phone and PC are connected, and you can start using the Bluetooth connection between Windows 10 and Android.
BONUS: What to do if Windows 10 doesn’t find or discover your Samsung Galaxy device
Like we said earlier, Bluetooth is not the most reliable technology, so you might come across some issues. While it did take quite a bit of time for Windows 10 to find our Nokia device, we weren’t able to discover our Samsung Galaxy at all when we started writing this tutorial.
If you are having the same issues, try the following:
- Turn Bluetooth off and on again on your Samsung Galaxy and Windows 10.
- Restart both devices and make sure you installed the latest updates for both Windows 10 and Android.
- Reset network settings. Since this is what made our Samsung Galaxy discoverable, we detail the process further down.
- Update the Bluetooth drivers on your Windows 10 laptop or PC. Try the technical support site of your computer’s manufacturer and look for drivers specific to your model.
To reset the network settings on your Samsung Galaxy device, open Settings, scroll down, and access General management. Then, tap Reset.
Press Reset in the General management settings of a Samsung Galaxy phone
Press “Reset network settings” from the available options.
Resetting network settings on Samsung Galaxy
Next, press the only option available, Reset settings.
NOTE: This resets all the network settings on your Samsung Galaxy device, so make sure you saved any important info first, like Wi-Fi passwords.
Tap Reset settings on Samsung Galaxy
Confirm your choice by pressing Reset again on the next page, and, as soon as it’s done, you should get a “Network settings reset” message on your Samsung Galaxy phone. You can now go back to Step 2 and continue following the tutorial to connect the phone to your laptop, PC, or tablet.
TIP: If you still can’t connect your Samsung Android to your Windows 10 computer, you can try something different. Samsung Galaxy devices have their own built-in feature that pairs them to Windows 10, and you can learn all about using it to connect a phone with a laptop or PC from our tutorial about Your Phone Companion – Link to Windows.
Did you connect your Android to your PC? Was it to enable Bluetooth tethering or something else?
Now that you managed to connect your phone to your laptop via Bluetooth, you should know that the connection remains active until you disable Bluetooth or turn off, unpair, or move one of the two devices out of range. Before you close this tutorial, we’re curious why you connected your Android to your Windows 10 computer. Was it to share files, enable Bluetooth tethering, or something else? Let us know in the comments below.