如果您在网络连接^{(Network Connections)}下看不到无线适配器^(Adapter)，设备管理器下也没有网络^(Network)适配器选项卡，那么您的网络适配器似乎在您的 Windows 10 上丢失或未检测到，^{(Network Adapter is missing or not detected on your Windows 10)}这是一个严重的问题，因为您将无法访问Internet，直到问题得到解决。简而言之，当您单击系统托盘上的无线^(Wireless)图标时，不会列出任何设备以连接到Internet，如果您打开设备管理器^{(Device Manager)}，则不会看到网络适配器^{(Network Adapter)}选项卡。

这些是网络适配器^{(Network Adapter)}丢失问题背后的原因：

• ^(Network)设备^(Device)管理器中缺少网络适配器
• 设备管理器^{(Device Manager)}中没有显示网络^(Network) 适配器^(Adapters)
• 未检测到网络适配器
• ^{(Network Adapter)}未找到^(Found)网络适配器Windows 10
• 设备管理器^{(Device Manager)}中没有网络适配器^{(Network Adapter)}

此问题的主要原因似乎是网络适配器^{(Network Adapter)}驱动程序过时、不兼容或损坏。如果您最近从以前版本的Windows升级，则旧驱动程序可能无法与新Windows一起使用，因此会出现问题。因此，不要浪费任何时间，让我们看看如何使用下面列出的故障排除步骤实际修复Windows 10中缺少网络适配器的问题。^{(Fix Network Adapter Missing)}

注意：请确保在继续之前卸载 PC 上的所有VPN软件。

修复^{(Fix Network Adapter Missing)}Windows 10中缺少的网络适配器

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法一：重启电脑^{(Method 1: Reboot your Computer)}

我们大多数人都知道这个非常基本的技巧。重新启动计算机^{(Rebooting your computer)}有时可以通过重新开始来解决任何软件冲突。因此，如果您宁愿让计算机进入睡眠状态，那么重新启动计算机是一个好主意。

1. 单击开始菜单^{(Start menu)}，然后单击左下角的电源按钮^{(Power button)}。

2.接下来，单击重新启动^(Restart)选项，您的计算机将自行重新启动。

计算机重新启动后，检查您的问题是否已解决。

方法二：^{(Method 2: F)}Flush DNS 并重置 Winsock 组件^{(lush DNS and Reset Winsock Components)}

1.打开提升的命令提示符^{(elevated Command Prompt)}。

2. 现在输入以下命令并在每个命令后按Enter ：

ipconfig /release
ipconfig /flushdns
ipconfig /renew

3.再次^(Again)打开命令提示符^{(Command Prompt)}并一一键入以下命令，然后在每个命令后按Enter：

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

4. 重新启动以应用更改。刷新DNS似乎可以 修复 Windows 10 上的网络适配器驱动程序问题。^{( Fix Network Adapter Driver Issues on Windows 10.)}

方法 3：运行 WWAN AutoConfig 服务^{(Method 3: Run WWAN AutoConfig Service)}

1. 按 Windows 键 + R 然后键入services.msc并按 Enter。

2. 在列表中找到WWAN AutoConfig Service（按 W 可快速到达列表末尾）。

3. 双击WWAN 自动配置服务。^{(WWAN AutoConfig Service.)}

4. 如果服务已经在运行，则单击停止^(Stop)，然后从启动^(Startup)类型下拉列表中选择自动。^(Automatic.)

5. 单击应用，然后单击确定。

6. 右键单击​​ WWAN AutoConfig 服务 ^{(WWAN AutoConfig Service )}并选择开始。^(Start.)

方法 4：更新网络适配器驱动程序^{(Method 4: Update Network Adapter Drivers)}

1. 按 Windows 键 + R 并在运行对话框中输入“ devmgmt.msc ”打开^{(devmgmt.msc)}设备管理器。^{(device manager.)}

2. 展开网络适配器^{(Network adapters)}，然后右键单击您的Wi-Fi 控制器 ^{( Wi-Fi controller )}（例如Broadcom或Intel）并选择更新驱动程序软件。^{(Update Driver Software.)}

3. 现在选择“自动搜索更新的驱动程序软件^{(Search for automatically for updated driver software)}”。

4. 现在Windows会自动搜索网络驱动更新^{(Windows will automatically search for the Network driver update)}，如果找到新的更新，会自动下载安装。

5. 完成后，关闭所有内容并重新启动您的 PC。

6. 如果您仍然面临Windows 10 中缺少网络适配器的问题^{(Network Adapter Missing in Windows 10 issue)}，请再次右键单击您的WiFi控制器并在设备管理器中选择^{(Device Manager)}更新驱动程序^{(Update driver)}。

7. 现在，在更新驱动程序软件 Windows^{(Update Driver Software Windows)}中，选择“浏览我的计算机以查找驱动程序软件。^{(Browse my computer for driver software.)}“

8. 现在选择“让我从计算机上的可用驱动程序列表中进行选择。^{(Let me pick from a list of available drivers on my computer.)}“

9. 尝试从列出的版本更新驱动程序（确保选中兼容硬件）。^{(update drivers from the listed versions (make sure to checkmark compatible hardware).)}

10. 如果上述方法不起作用，请访问制造商的网站^{(the manufacturer’s website)(the manufacturer’s website)}更新驱动程序。

11. 从制造商的网站下载并安装最新的驱动程序，然后重新启动您的 PC。

方法 5：卸载网络适配器驱动程序^{(Method 5: Uninstall Network Adapter Drivers)}

1. 按Windows Key + R然后输入“ devmgmt.msc ”并按Enter打开设备管理器^{(Device Manager)}。

2.展开网络适配器^{(Expand Network Adapters)}并找到您的网络适配器名称。^{(your network adapter name.)}

3. 确保记下适配器名称^{(note down the adapter name)}，以防出现问题。

4. 右键单击​​您的网络适配器并将其卸载。

5.它会要求确认选择是。^{( select Yes.)}

6. 重新启动您的 PC，Windows将再次自动安装网络适配器驱动程序。

7. 如果驱动程序未自动安装，请再次打开设备管理器^{(Device Manager)}。

8. 从设备管理器^{(Device Manager)}菜单中，单击操作^(Action)，然后单击“扫描硬件更改^{(Scan for hardware changes)}”。

方法 6：确保 Windows 是最新的^{(Method 6: Make sure Windows is up to date)}

1. 按 Windows Key + I 打开设置，然后单击 更新和安全。^{( Update & Security.)}

2. 从左侧菜单中单击Windows 更新。^{(Windows Update.)}

3. 现在单击“检查更新^{(Check for updates)}”按钮以检查任何可用的更新。

4. 如果有任何更新待处理，请单击下载并安装更新。^{(Download & Install updates.)}

5. 下载更新后，安装它们，您的 Windows 将变为最新。

6. 安装更新后，重新启动 PC 以保存更改。

方法 7：运行网络适配器疑难解答^{(Method 7: Run Network Adapter Troubleshooter)}

1. 按Windows Key + I 打开设置^(Settings)，然后单击更新和安全。^{( Update & Security.)}

2. 从左侧菜单中选择疑难解答。^{( Troubleshoot.)}

3. 在疑难解答下单击Internet 连接^{( Internet Connections)}，然后单击运行疑难解答。^{(Run the troubleshooter.)}

4. 按照屏幕上的进一步说明运行疑难解答。

5. 如果上述方法未能解决问题，请从“疑难解答”^{(Troubleshoot)}窗口中单击“网络适配器^{( Network Adapter)}” ，然后单击“运行疑难解答”。^{( Run the troubleshooter.)}

5. 重新启动您的 PC 以保存更改并查看您是否能够修复网络适配器丢失问题。^{( fix the Network Adapter Missing issue.)}

Method 8: Install Intel PROSet/Wireless Software

有时问题是由于过时的英特尔 PROSet 软件^{(Intel PROSet Software)}引起的，因此更新它似乎可以修复 Windows 10 中缺少网络适配器的问题^{(fix Network Adapter Missing in Windows 10 issue)}。因此，请前往此处^{(go here)}下载最新版本的 PROSet/Wireless Software并安装。这是管理您的 WiFi 连接而不是Windows^(Windows)的第三方软件，如果PROset/Wireless Software已过时，可能会导致 无线网络适配器中的驱动程序问题。^{(Wireless Network Adapter. )}因此，请阅读如何在 Windows 10 上更新网络适配器驱动程序。^{(How to Update Network Adapter Drivers on Windows 10.)}

方法 9：重置网络连接

1. 按Windows Key + I 打开设置^(Settings)，然后单击网络和 Internet。^{( Network & Internet.)}

2. 从左侧菜单中选择状态。^{( Status.)}

3. 现在向下滚动并单击底部的网络重置。^{(Network reset)}

4. 再次点击网络重置部分下的“立即重置”。^{(Reset now)}

5. 这将成功重置您的网络适配器，一旦完成，系统将重新启动。

方法 10：执行系统还原^{(Method 10: Perform a System Restore)}

系统还原^{(System Restore)}始终可以解决错误，因此 系统还原^{(System Restore)}绝对可以帮助您修复此错误。因此，无需浪费任何时间运行系统还原^{( run system restore)}以解决网络适配器丢失问题。 ^{(resolve Network Adapter Missing issue. )}

方法 11：使用提升的命令提示符^{(Method 11: Using elevated Command Prompt)}

1. 按Windows Key + X，然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

2. 在 cmd 中输入以下命令并回车^(Enter)：

netcfg –sn

3. 这将显示网络协议列表，并在该列表中找到DNI_DNE。

4. 如果列出了DNI_DNE，则在 cmd 中键入以下命令：

reg delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f

netcfg -v -u dni_dne

5. 如果您没有看到列出的DNI_DNE，则只需运行命令netcfg -v -u dni_dne。

6. 现在，如果您在尝试运行上述命令后收到错误 0x80004002 ，那么您需要手动删除上述密钥。^{(receive the error 0x80004002)}

7. 按 Windows 键 + R 然后键入regedit并按 Enter。

8. 导航到以下注册表项^{(Registry Key)}：

HKEY_CLASSES_ROOT\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3}

9. 删除此键，然后在 cmd 中再次键入netcfg -v -u dni_dne命令。

10. 重新启动您的 PC 以保存更改。

为你推荐：^{(Recommended for you:)}

• 修复邮件、日历和人员应用程序无法正常工作^{(Fix Mail, Calendar, and People Apps not working)}
• 如何修复 Chrome err_spdy_protocol_error^{(How to Fix Chrome err_spdy_protocol_error)}
• 修复安装 Windows 10 后失去互联网连接^{(Fix losing internet connection after installing Windows 10)}
• Fix Working on updates 100% complete Don’t turn off your computer

就是这样，您已成功修复 Windows 10 中缺少的网络适配器，^{(Fix Network Adapter Missing in Windows 10)}但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

Network Adapter missing in Windows 10? 11 Working Ways to Fix it!

If you don’t see Wirelesѕ Adapter under Network Connectіons neither there is a Network adapter tab under device manager then it seems like your Network Adapter is missing or not detected on your Windows 10 which is a serious issue because you won’t be able to access the Internet until the issue is resolved. In short, when you click on the Wireless icon on the system tray there won’t be any device listed in order to connect to the Internet and if you open Device Manager then you won’t see the Network Adapter tab.

These are the reasons behind the Network Adapter missing issue:

• Network adapter missing in Device manager
• No Network Adapters showing in Device Manager
• Network Adapter Not Detected
• Network Adapter Not Found Windows 10
• No Network Adapter In Device Manager

The main cause of this issue seems to be outdated, incompatible or corrupted Network Adapter drivers. If you have recently upgraded from previous versions of Windows then it’s possible that the old drivers will not work with the new Windows and hence the issue. So without wasting any time let’s see how to actually Fix Network Adapter Missing in Windows 10 issue with the below-listed troubleshooting steps.

Note: Just make sure to uninstall any VPN software on your PC before continuing.

Fix Network Adapter Missing in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Reboot your Computer

Most of us know about this very basic trick. Rebooting your computer can sometimes fix any software conflict by giving it a fresh start. So if you are someone who would rather put their computer on sleep, restarting your computer is a good idea.

1. Click on the Start menu and then click on the Power button available at the bottom left corner.

2. Next, click on the Restart option and your computer will restart itself.

After the computer restarts, check if your problem is resolved or not.

Method 2: Flush DNS and Reset Winsock Components

1. Open elevated Command Prompt.

2. Now type the following command and press Enter after each one:

ipconfig /release
ipconfig /flushdns
ipconfig /renew

3. Again open Command Prompt and type the following command one by one and hit enter after each one:

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

4. Reboot to apply changes. Flushing DNS seems to Fix Network Adapter Driver Issues on Windows 10.

Method 3: Run WWAN AutoConfig Service

1. Press Windows Key + R then type services.msc and hit Enter.

2. Find WWAN AutoConfig Service in the list (press W to reach to the end of the list quickly).

3. Double-click on WWAN AutoConfig Service.

4. If the service is already running then click on Stop, then from the Startup type drop-down select Automatic.

5. Click Apply followed by OK.

6. Right-click on the WWAN AutoConfig Service and select Start.

Method 4: Update Network Adapter Drivers

1. Press Windows key + R and type “devmgmt.msc” in Run dialogue box to open device manager.

2. Expand Network adapters, then right-click on your Wi-Fi controller (for example Broadcom or Intel) and select Update Driver Software.

3. Now select “Search for automatically for updated driver software“.

4. Now Windows will automatically search for the Network driver update and if new update is found, it will automatically download and install it.

5. Once finished, close everything and reboot your PC.

6. If you’re still facing the Network Adapter Missing in Windows 10 issue, then again right-click on your WiFi controller and select Update driver in Device Manager.

7. Now, in the Update Driver Software Windows, select “Browse my computer for driver software.“

8. Now select “Let me pick from a list of available drivers on my computer.“

9. Try to update drivers from the listed versions (make sure to checkmark compatible hardware).

10. If the above didn’t work then go to the manufacturer’s website to update drivers.

11. Download and install the latest driver from the manufacturer’s website then restart your PC.

Method 5: Uninstall Network Adapter Drivers

1. Press Windows Key + R then type “devmgmt.msc” and hit Enter to open Device Manager.

2. Expand Network Adapters and find your network adapter name.

3. Make sure you note down the adapter name just in case something goes wrong.

4. Right-click on your network adapter and uninstall it.

5. It will ask for confirmation select Yes.

6. Restart your PC and Windows will automatically install the network adapter drivers again.

7. If the drivers are not installed automatically then again open the Device Manager.

8. From the Device Manager menu, click on Action then click on “Scan for hardware changes“.

Method 6: Make sure Windows is up to date

1. Press Windows Key + I to open Settings then click on Update & Security.

2. From the left-hand side, menu click on Windows Update.

3. Now click on the “Check for updates” button to check for any available updates.

4. If any updates are pending then click on Download & Install updates.

5. Once the updates are downloaded, install them and your Windows will become up-to-date.

6. After the updates are installed reboot your PC to save changes.

Method 7: Run Network Adapter Troubleshooter

1. Press Windows Key + I to open Settings then click on Update & Security.

2. From the left-hand menu select Troubleshoot.

3. Under Troubleshoot click on Internet Connections and then click Run the troubleshooter.

4. Follow further on-screen instructions to run the troubleshooter.

5. If the above didn’t fix the issue then from the Troubleshoot window, click on Network Adapter and then click on Run the troubleshooter.

5. Reboot your PC to save changes and see if you’re able to fix the Network Adapter Missing issue.

Method 8: Install Intel PROSet/Wireless Software

Sometimes the problem is caused due to outdated Intel PROSet Software, hence updating it seems to fix Network Adapter Missing in Windows 10 issue. Therefore, go here and download the latest version of PROSet/Wireless Software and install it. This is a third party software which manages your WiFi connection instead of Windows and if PROset/Wireless Software is outdated is can cause drivers issue in Wireless Network Adapter. Hence, read How to Update Network Adapter Drivers on Windows 10.

Method 9: Reset Network Connection

1. Press Windows Key + I to open Settings then click on Network & Internet.

2. From the left-hand menu select Status.

3. Now scroll down and click on Network reset at the bottom.

4. Again click on “Reset now” under Network reset section.

5. This will successfully reset your network adapter and once it is complete the system will be restarted.

Method 10: Perform a System Restore

System Restore always works in resolving the error, therefore System Restore can definitely help you in fixing this error. So without wasting any time run system restore in order to resolve Network Adapter Missing issue. 

Method 11: Using elevated Command Prompt

1. Press Windows Key + X then select Command Prompt (Admin).

2. Type the following command into cmd and hit Enter:

netcfg –s n

3. This will display a list of networking protocols and in that list find DNI_DNE.

4. If DNI_DNE is listed then type the following command into cmd:

reg delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f

netcfg -v -u dni_dne

5. If you don’t see DNI_DNE listed then only run the command netcfg -v -u dni_dne.

6. Now if you receive the error 0x80004002 after trying to run the above command then you need to delete the above key manually.

7. Press Windows Key + R then type regedit and hit Enter.

8. Navigate to the following Registry Key:

HKEY_CLASSES_ROOT\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3}

9. Delete this key and then again type netcfg -v -u dni_dne command in cmd.

10. Reboot your PC to save changes.

Recommended for you:

• Fix Mail, Calendar, and People Apps not working
• How to Fix Chrome err_spdy_protocol_error
• Fix losing internet connection after installing Windows 10
• Fix Working on updates 100% complete Don’t turn off your computer

That’s it you have successfully Fix Network Adapter Missing in Windows 10 but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• 如何在 Windows 10 上更新网络适配器驱动程序

• Network Adapter缺少Windows 10

• 如何在Windows 10上共享Setup Network Files

• 2 Ways至Windows 10中的Map Network Drive

• Windows 10上的Reset Network Data Usage [指南]

• 如何在 Windows 10 中打开网络发现

• 如何在Windows 10中更改Screen Brightness

• 修复 Windows 10 中的未知网络

• 修复 Windows 10 中的 Microsoft Edge ERR 网络更改

• Windows 10 Timeline轻松View Chrome Activity

• 如何在Windows 10中启用或Disable Emoji Panel

• 如何完全从Windows 10卸载McAfee

• 在Windows 10中创建Full System Image Backup [终极指南]

• 如何在Windows 10启用有源Directory

• 3 Ways至Add Album Art至Z86152至Windows 10中的MP3

• Windows 10中的Defer Feature and Quality Updates

• 如何在Windows 10上运行JAR Files

• 3 Ways至Windows 10中的Increase Dedicated VRAM

• 修复 Wi-Fi 适配器在 Windows 10 中不起作用

• Fix Computer Wo在Windows 10中没有转到Sleep Mode