有时，已安装的程序或驱动程序会给您的系统带来意外错误或导致 Windows 出现不可预测的行为。通常卸载程序或驱动程序有助于解决问题，但如果这不能解决问题，那么您可以尝试使用 Windows 10 上的系统还原将系统还原到一切正常的较早日期。^{(using System Restore on Windows 10.)}

系统还原^(Restore)使用称为系统保护^{(system protection)(system protection)}的功能定期在您的计算机上创建和保存还原点。这些还原点包含有关注册表设置的信息和 Windows 使用的其他系统信息。

什么是系统还原？^{(What is System Restore?)}

系统还原是^{(System Restore)}Windows中的一项功能，最初是在Windows XP中引入的，它允许用户将计算机还原到以前的状态而不会丢失任何数据。如果安装时的任何文件或软件在Windows中产生问题，则可以使用系统还原。^{(System Restore)}每次 Windows 出现问题时，^(Windows)格式化Windows都不是解决方案。系统还原^{(System Restore)}通过将系统还原到以前的状态而不会丢失数据和文件，从而省去了一次又一次格式化Windows的麻烦。^(Windows)

如何在Windows 10上使用^{(Windows 10)}系统还原^{(System Restore)}

如何创建系统还原点^{(How to Create a System Restore point)}

系统还原^{(System Restore)}意味着将系统回滚到旧配置。这种旧配置是用户特定的或自动的。要使系统还原^{(System Restore)}用户特定，您必须创建一个系统还原点^{(System Restore)}。此系统还原点^{(System Restore)}是您进行系统还原时系统将恢复到的配置^{(System Restore)}。

要在Windows 10中创建系统还原点^{( System Restore point)}，请按照以下步骤操作：

1. 按Windows Key + S调出搜索，然后键入 创建还原点^{(Create a restore point)}并单击出现的搜索结果。

2.系统属性^{(System Properties)}窗口将弹出。在保护设置^{(Protection Settings)}下，单击配置^(Configure)按钮以配置驱动器的恢复设置。

3.勾选恢复设置下的系统保护^{(Turn on system protection)}，并选择磁盘使用下的最大使用。^{(Max usage)}

4. 在系统属性选项卡^{(System Properties tab)}下单击创建^(Create) 按钮。

5. 输入还原点的名称，^{(name of the restore point)}然后单击创建^(Create)。

6.稍后将创建一个还原点。^(Restore)

现在，您创建的此还原点可用于将来将您的系统设置还原到此还原点^(Restore)状态。将来，如果出现任何问题，您可以将系统还原到此还原点^{(restore your system to this Restore point)}，所有更改都将还原到此点。

如何执行系统还原^{(How to Perform System Restore)}

现在，一旦您创建了系统还原点或系统中已经存在系统还原点，您就可以使用还原点轻松地将 PC 还原到旧配置。

另请阅读：^{(Also Read:)} 如何在 Windows 10 中修复损坏的系统文件^{(How to Repair Corrupted System Files in Windows 10)}

要在Windows 10上使用^{(Windows 10)}系统还原^{(System Restore )}，请按照以下步骤操作：

1. 在开始菜单搜索类型控制面板^{(Control Panel)}。在搜索结果中单击^(Click)控制面板以将其打开。^{(Control Panel)}

2. 在控制面板^{(Control panel)}下点击系统和安全选项。^{(System and Security option.)}

3.接下来，单击系统^(System)选项。

4. 单击系统^(System)窗口左上角的系统保护。^{(System Protection )}

5.系统^(System)属性窗口会弹出。在保护设置^{(protection settings)} 下选择要执行系统执行的^{(System Perform)}驱动器 ^(drive )，然后单击系统还原。^{(System Restore.)}

6.会弹出系统还原窗口，点击^{(System Restore)}下一步^(Next)。

7.系统还原点列表将出现^{(List of System Restore points will appear)}。从列表中选择最近的系统还原点^(Restore)，然后单击下一步。^(Next.)

8. 将出现一个确认对话框^{(confirmation dialogue box)}。最后，点击完成。^(Finish.)

9.当消息提示为 –一旦启动，系统还原不能被中断^{(Once Started, System Restore cannot be interrupted.)}时，单击是。^(Yes)

一段时间后，该过程将完成。请记住^(Remember)，一旦系统还原^{(System Restore)}过程您将无法停止，并且需要一些时间才能完成，因此请不要惊慌或尝试强行取消该过程。

安全模式下的系统还原^{(System Restore in Safe Mode)}

由于^(Due)某些严重的Windows问题或软件冲突，系统还原可能无法^{(System Restore won’t work)}运行，您的系统将无法回滚到所需的还原点^(Restore)。要解决此问题，您需要以安全模式启动^{(Safe Mode)}Windows。在安全模式下，只有Window^(Window)的基本部分运行，这意味着任何有问题的软件、应用程序、驱动程序或设置都将被禁用。以这种方式完成的系统还原^{(System Restore)}通常是成功的。

要在Windows 10上访问安全模式^{(Safe Mode)}并执行系统还原^{(System Restore)}，请按照以下步骤操作：

1. 使用此处^(here)列出的任何方法以安全模式^{(Safe mode)}启动 Windows 。

2. 系统将以安全模式启动，有多个选项。单击^(Click)疑难解答^{(Troubleshoot)}选项。

3. 在疑难解答^{(Troubleshoot)}下，单击高级选项。^{(Advanced Options.)}

4. 在高级^(Advanced)选项下将有六个选项，单击系统还原^{(System Restore)}，系统还原过程将开始。

5. 它将询问您要将系统还原到的系统^(System)还原点^{(System Restore point)}。选择最近的还原点。^{(most recent restore point.)}

设备未启动时的系统还原^{(System Restore when the device is not booting up)}

可能是设备未启动或Windows在正常启动时未启动。因此，要在这些情况下执行系统还原，请按照下列步骤操作：^{(System Restore)}

1、打开系统时连续按F8键进入Boot菜单^{(Boot menu)(Boot menu)}。

2. 现在您将看到“疑难解答”^{(Troubleshoot)}窗口，然后单击“高级选项^{(Advanced options)}” 。

3.单击系统还原^{(System Restore)}选项，其余与上述相同。

虽然我们专注于Windows 10，但相同的步骤可以让您完成Windows 8.1 和 Windows 7 上的系统还原。^{(System Restore)}

尽管系统还原确实非常有用，但在处理^{(System Restore)}系统还原^{(System Restore)}时应牢记某些事情。

• 系统还原^{(System Restore)}不会保护您的系统免受病毒和其他恶意软件的侵害。
• 如果自上次设置还原点以来您创建了任何新用户帐户，它将被删除，但是，用户创建的数据文件将保留。
• 系统还原^(Restore)不能用于Windows备份。

受到推崇的：^{(Recommended:)}

• 修复 Windows 10 上的无可启动设备错误^{(Fix No Bootable Device Error on Windows 10)}
• 修复 Windows 10 中未检测到第二个监视器^{(Fix Second Monitor Not Detected in Windows 10)}

希望^(Hopefully)使用上述方法之一，您将能够在 Windows 10 上使用系统还原^{(use System Restore on Windows 10)}。但是，如果您仍有任何问题，或者您被困在某个步骤中，请随时在评论部分与您联系。

How to use System Restore on Windows 10

Sometimes, the installed program or a driver creates an unexpected error to your system or causes Windows tо behave unpredictably. Usually uninstalling the program or driver helps іn fixing the problem but if that doesn’t fix the isѕue thеn you can try restoring your system to an earlier date when everythіng worked correctly using System Restore on Windows 10.

System Restore uses a feature called system protection to regularly create and save restore points on your computer. These restore points contain information about registry settings and other system information that Windows uses.

What is System Restore?

System Restore is a feature in Windows, first introduced in Windows XP which allows users to restore their computers to a previous state without losing any data. If any file or software on installation creates a problem in Windows than System Restore can be used. Every time there is a problem in Windows, formatting Windows is not the solution. System Restore saves the hassle of formatting Windows again & again by restoring the system to the previous state without losing the data & files.

How to use System Restore on Windows 10

How to Create a System Restore point

System Restore means rolling back your system to the old configuration. This old configuration is either user-specific or automatic. To make the System Restore user-specific you have to create a System Restore point. This System Restore point is the configuration to which your system will revert back when you do a System Restore.

To create a System Restore point in Windows 10, follow the below steps:

1. Press Windows Key + S to bring up the search then type Create a restore point & click on the search result that appeared.

2. The System Properties window will pop up. Under Protection Settings, click on the Configure button to configure the restore settings for the drive.

3. Checkmark Turn on system protection under restore settings and select the Max usage under disk usage.

4. Under the System Properties tab click on the Create button.

5. Enter the name of the restore point and click Create.

6. A Restore point will be created in a few moments.

Now, this restore point created by you can be used in the future to restore your system settings to this Restore point state. In the future, if any problem occurs you can restore your system to this Restore point and all the changes will be reverted back to this point.

How to Perform System Restore

Now once you have created a system restore point or a system restore point already exists in your system, you can easily restore your PC to the old configuration using the restore points.

Also Read: How to Repair Corrupted System Files in Windows 10

To use System Restore on Windows 10, follow the below steps:

1. In the Start Menu search type Control Panel. Click on the Control Panel from the search result to open it.

2. Under Control panel click on System and Security option.

3. Next, click on the System option.

4. Click on System Protection from the top left-hand side of the System window.

5. System property window will pop up. Choose the drive for which you want to perform the System Perform under the protection settings then click on System Restore.

6. A System Restore window will pop up, click Next.

7. List of System Restore points will appear. Choose the most recent System Restore point from the list then click Next.

8. A confirmation dialogue box will appear. Finally, click on Finish.

9. Click on Yes when a message Prompts as – Once Started, System Restore cannot be interrupted.

After some time the process will complete. Remember, once the System Restore process you cannot stop it and it will take some time to complete so don’t panic or don’t try to forcefully cancel the process.

System Restore in Safe Mode

Due to some serious Windows issues or software conflict, it might be possible that System Restore won’t work and your system won’t be able to roll back to the desired Restore point. To overcome this problem, you need to start the Windows in Safe Mode. In safe mode, only the essential part of the Window runs meaning any problematic software, apps, drivers or settings will be disabled. System Restore done this way is usually successful.

To access Safe Mode and perform a System Restore on Windows 10, follow the below steps:

1. Start Windows in Safe mode Using any of the methods listed here.

2. The system will start in Safe mode with multiple options. Click on the Troubleshoot option.

3. Under Troubleshoot, Click on Advanced Options.

4. Under Advanced options there will be six options, click on System Restore and the system restore process will start.

5. It will ask for the System Restore point to which you want to restore the System. Select the most recent restore point.

System Restore when the device is not booting up

It might be the case that the device is not booting or the Windows is not starting as it’s start normally. So, to perform System Restore in these conditions, follow these steps:

1. When opening the system continuously press the F8 key so that you can enter the Boot menu.

2. Now you will see the Troubleshoot window and under that click on Advanced options.

3. Click on the System Restore option and the rest is the same as mentioned above.

While we’re focusing on Windows 10, but the same steps can get you through to System Restore on windows 8.1 and windows 7.

Though System Restore is really very helpful certain things should be kept in mind while dealing with System Restore.

• System Restore will not protect your system from viruses and other malware.
• If you created any new user accounts since the last restore point was set, it will be erased, and however, the data files that the user-created will remain.
• System Restore does not serve the purpose of Windows backup.

Recommended:

• Fix No Bootable Device Error on Windows 10
• Fix Second Monitor Not Detected in Windows 10

Hopefully, using one of the above methods you will be able to use System Restore on Windows 10. But if you still have any questions or you’re stuck in some step feel free to reach out in the comment section.

Related posts

• System Restore在Windows 10中的Delete System Image Restore Point

• 如何在Windows 10中从System Restore Point中恢复文件

• SysRestore是Windows 10的免费替代System Restore software

• 如何创建System Restore shortcut在Windows 10

• Rstrui.exe在Windows 10中不工作或认可

• 如何在Windows 10中编辑或更改System Information

• 自由软件监控Windows 10中的System Performance & Resources

• Windows 10上的Fix FAT FILE SYSTEM（FastFat.sys）Blue Screen

• Remove Restore以前的版本Windows 10项Context menu

• Windows 7的哪些功能在Windows 10中不再提供？

• 什么是System Restore和4种方法使用它

• 启用System Print Dialog在Microsoft Edge在Windows 10

• 如何降级Windows 11并滚回Windows 10

• 2种方式在Windows 10中启用System Restore

• 如何Backup & Restore Boot Configuration Data（BCD）在Windows 10

• 如何打开Off Notification and System Sounds在Windows 10

• System Restore，Error 0x80070013，System Restore，Backup or Windows Update Fix

• 如何在Windows 10中打开，卸载或永久附加VHD file

• 如何在Windows 10中创建System Restore Point

• Belarc Advisor是Windows 10的完整System Manager & Auditor