默认情况下，系统保护可以删除作为本地卷影副本的系统还原点。^{(delete System Restore Points)}系统映像还原点^{(System Image Restore Point)}被描述为“备份”类型，而不是卷影副本——它是指向包含备份的驱动器的元数据。^(Metadata)这些备份^(Backup)还原点将在删除所有其他类型的还原点后保留。在这篇文章中，我们将向您展示如何在 Windows 10 中从系统还原中删除系统映像还原点。^{(delete System Image Restore Point from System Restore)}

当您创建系统映像时， 系统映像还原点^{(System Image Restore Point)}将在系统还原^{(System Restore)}中可用，如您从上面的导入图像中所见。这是一种特殊类型的还原点，当您在^{(Restore Point)}系统还原^{(System Restore)}中选择“显示更多还原点”时，它将与其他还原点一起显示为“类型备份^(Backup)” 。

如果要删除 Windows 10 设备上不需要的旧系统映像，可以通过管理 Windows 备份来执行此操作，这将删除系统映像^{(System Image)}并删除其关联的系统映像还原点^{(System Image Restore Point)}。但这只能在系统映像^{(System Image)}仍然可用时完成 - 如果它存储在外部驱动器上，您需要将该驱动器连接到您的 PC。

如果系统映像^{(System Images)}已被手动删除（或存储它们的驱动器不再可用），这些还原点仍然存在，但不再有用。Windows 10中没有可用的工具来删除此类孤立的还原点，但可以手动删除元数据。

^{(Delete System Image Restore Point)}从系统还原中^{(System Restore)}删除系统映像还原点

所有类型的还原点^(Restore)都存储在隐藏和受保护的C:\System Volume Information 文件夹中。系统映像还原点^{(System Image Restore Points)}的元数据存储在 C:\System Volume Information\WindowsImageBackup 文件夹中。

要从Windows 10中的^{(Windows 10)}系统还原^{(System Restore)}中删除系统映像还原点^{(System Image Restore Point)}元数据，请执行以下操作：

• 启动到高级启动选项^{(Boot into Advanced Startup Options)}。
• 在“高级启动^{(Advanced Startup)} 选项^(Options)”屏幕上，选择“ 高级选项”。^{( Advanced Options.)}
• 选择 疑难解答。^{( Troubleshoot.)}
• 在高级^(Advanced)选项屏幕下，选择命令提示符^{(Command Prompt)}。
• 在CMD提示符下，键入或复制并粘贴以下命令，然后按 Enter^(Enter)：

CD System Volume Information\WindowsImageBackup

接下来，键入下面的命令并在每行后按 Enter^(Enter)以删除每个Catalog和SPPMetadataCache文件夹的内容。

DEL Catalog\*.*

DEL SPPMetadataCache\*.*

执行完这两个命令后，您已成功清除所有系统映像还原点的^{(System Image Restore)}元数据^(Metadata)。

• 退出命令提示符窗口。
• 重新启动电脑。

现在，所有备份^(Backup)类型的系统映像还原点^{(System Image Restore)}都将从系统还原^{(System Restore)}中删除。

就是这样！

Delete System Image Restore Point from System Restore in Windows 10

System Protection by defaυlt can delete System Restore Points that are local shadow copies. A System Image Restore Point is described as a type ‘Backup’ and is not a shadow copy – it is Metadata that points to the drive containing the backup. These Backup restore points will remain after deleting all other types of restore points. In this post, we will show you how to delete System Image Restore Point from System Restore in Windows 10.

When you create a System Image, a System Image Restore Point will be available in System Restore, as you can see from the lead-in image above. This is a special type of Restore Point that will appear alongside the other restore points as ‘type Backup’ when you select the ‘Show more restore points’ in System Restore.

If you want to delete old unwanted system images on your Windows 10 device, you can do so via Manage Windows Backup which will both delete a System Image and remove its associated System Image Restore Point. But this can only be done while the System Image is still available – if it was stored on an external drive, you’ll need to connect that drive to your PC.

If the System Images have been deleted manually (or the drive they were stored on is no longer available) these restore points remain but are of no further use. There is no tool available in Windows 10 to remove such orphaned restore points, but the metadata can be deleted manually.

Delete System Image Restore Point from System Restore

Restore points of all types are stored in the hidden and protected C:\System Volume Information folder. The metadata for System Image Restore Points is stored in the C:\System Volume Information\WindowsImageBackup folder.

To delete System Image Restore Point metadata from System Restore in Windows 10, do the following:

• Boot into Advanced Startup Options.
• At the Advanced Startup Options screen, select Advanced Options.
• Select Troubleshoot.
• Under Advanced options screen, select Command Prompt.
• In the CMD prompt, type or copy and paste the command below and hit Enter:

CD System Volume Information\WindowsImageBackup

Next, type the commands below and hit Enter after each line to delete the contents of each of the Catalog and SPPMetadataCache folders.

DEL Catalog\*.*

DEL SPPMetadataCache\*.*

Once you have executed both commands, you have successfully cleared the Metadata for all System Image Restore Points.

• Exit command prompt window.
• Restart the PC.

All System Image Restore Points of type Backup will now have been removed from System Restore.

That’s it!

Related posts

• 如何在Windows 10中从System Restore Point中恢复文件

• SysRestore是Windows 10的免费替代System Restore software

• 如何创建System Restore shortcut在Windows 10

• Rstrui.exe在Windows 10中不工作或认可

• 2种方式在Windows 10中启用System Restore

• 如何在Windows 10中编辑或更改System Information

• 如何在Windows 10中创建System Restore Point

• System Tray图标不Windows 10工作工作

• Windows 10中缺少DNS server工具RSAT

• 如何在Windows 10中创建System Image Backup

• 如何在Windows 10中配置System Restore

• System Restore Points在Windows 10中删除或缺少

• 启用System Print Dialog在Microsoft Edge在Windows 10

• 在Windows 10上使用System Lock自动静音音频

• System Elements & Font尺寸在Windows 10的Change Colors

• HoneyView Review：FREE FAST Image Viewer Software用于Windows 10

• 如何在Windows 10上使用System Restore

• 在Windows 10上打开和Enable System Restore

• Windows 10中的Backup and Restore WiFi或Wireless Network Profiles

• Windows 10上的Fix FAT FILE SYSTEM（FastFat.sys）Blue Screen