修复 0xc000000f:尝试读取引导配置数据时发生错误(Fix 0xc000000f: An Error occurred while attempting to read the boot configuration data)
错误 0xc000000f 的主要原因是BOOTMGR在硬盘上找不到BCD(引导配置数据库)信息。(Boot Configuration Database)硬盘中的BCD信息可能已损坏或丢失,为了解决此问题,您需要修复或重建(BCD)BCD。此外,有时此错误是由于系统文件被破坏或损坏而引起的,并且出现此错误的另一个原因可能是由于硬盘驱动(HDD)器电缆有故障而松动。
在这种情况下,重新启动您的 PC 将无济于事,因为您将再次看到错误消息屏幕,简而言之,您将陷入无限重启循环。现在您知道为什么会发生此错误,所以不要浪费任何时间,让我们看看如何实际修复 0xc000000f(Fix 0xc000000f):尝试使用下面列出的故障排除步骤读取引导配置数据时发生错误。
修复 0xc000000f:尝试读取引导配置数据时发生错误
方法1: (Method 1: )Run Automatic/Startup Repair
1.插入Windows 10 可启动安装 DVD 或恢复光盘( Windows 10 bootable installation DVD or Recovery Disc) 并重新启动您的 PC。
2.当提示Press any key to boot from CD or DVD时,按任意键(press any key)继续。
3.选择您的语言首选项,然后单击下一步(Next)。单击左下角的修复计算机。( Click Repair)
4.在选择选项屏幕上,单击疑难解答。( Troubleshoot.)
5.在疑难解答屏幕上,单击高级选项。(Advanced option.)
6.在高级(Advanced)选项屏幕上,单击自动修复或启动修复。( Automatic Repair or Startup Repair.)
7. 等待Windows Automatic/Startup Repairs完成。
8.重启成功修复 0xc000000f:尝试读取启动配置数据时出错(Fix 0xc000000f: An Error occurred while attempting to read the boot configuration data),如果没有,继续。
另外,请阅读如何修复自动修复无法修复您的 PC。(How to fix Automatic Repair couldn’t repair your PC.)
方法 2: (Method 2: )修复或重建 BCD(Repair or Rebuild BCD)
1.使用上述方法使用Windows(Windows)安装盘打开命令提示符。
2.现在一一键入以下命令,并在每个命令后按回车键:
a) bootrec.exe /FixMbr
b) bootrec.exe /FixBoot
c) bootrec.exe /RebuildBcd
3.如果上述命令失败,则在cmd中输入以下命令:
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
4.最后,退出 cmd 并重新启动Windows。
5.此方法似乎可以 修复 0xc000000f:尝试读取启动配置数据时发生错误,(Fix 0xc000000f: An Error occurred while attempting to read the boot configuration data) 但如果它不适合您,请继续。
方法 3:将您的 PC 恢复到较早的工作时间(Method 3: Restore your PC to an earlier working time)
1.放入Windows安装媒体或Recovery Drive/System Repair Disc并选择您的语言首选项(anguage preferences),然后单击下一步
2.单击底部的修复计算机。( Repair)
3.现在选择疑难解答(Troubleshoot),然后选择高级选项。(Advanced Options.)
4..最后,点击“系统还原(System Restore)”并按照屏幕提示完成还原。
5.重新启动您的 PC 以保存更改。
方法 4:检查硬盘电缆是否松动或故障(Method 4: Check for loose or faulty HDD cable)
在大多数情况下,此错误是由于硬盘连接错误或松动而发生的,为了确保不是这种情况,您需要检查您的 PC 是否存在连接中的任何类型的故障。
重要提示:(Important:)如果您的 PC 在保修期内,则不建议打开它的外壳,因为这会使您的保修失效,在这种情况下,更好的方法是将您的 PC 带到服务中心。另外,如果您没有任何技术知识,请不要乱用 PC,并确保寻找可以帮助您检查硬盘连接故障或松动的专业技术人员。
一旦你检查了硬盘的正确连接,重新启动你的电脑,这一次你可能能够修复 0xc000000f:尝试读取启动配置数据时发生错误。
方法 5:运行 SFC 和 CHKDSK(Method 5: Run SFC and CHKDSK)
1.再次使用方法1进入命令提示符,只需单击高级(Advanced)选项屏幕中的命令提示符。
2.在cmd中输入以下命令并在每个命令后按回车:
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
chkdsk C: /f /r /x
注意:确保(Make)使用当前安装Windows的驱动器号。(Windows)同样在上面的命令中 C: 是我们要运行检查磁盘的驱动器,/f 代表一个标志,它 chkdsk 允许修复与驱动器相关的任何错误,/r 让 chkdsk 搜索坏扇区并执行恢复和/x 指示检查磁盘在开始该过程之前卸载驱动器。
3.退出命令提示符并重新启动您的PC。
使用此命令后,主分区现在会生成错误“第一个 NTFS 引导扇区不可读或损坏。(The first NTFS boot sector is unreadable or corrupt.)” 不过好在它居然修复了第二个分区。
为你推荐:(Recommended for you:)
就是这样,您已成功修复 0xc000000f(Fix 0xc000000f):尝试读取引导配置数据时发生错误,但如果您对这篇文章仍有任何疑问,请随时在评论部分询问。
Fix 0xc000000f: An Error occurred while attempting to read the boot configuration data
Fix 0xc000000f: An Error occurred while attempting to read the boot configuration data
The main cause of the error 0xc000000f is when BOOTMGR can’t find BCD (Boot Configuration Database) information on the hard disk. The BCD information might be corrupted or missing from hard disk and in order to fix this issue, you need to repair or rebuild BCD. Also, sometimes this error is caused due to system files being compromised or corrupted and one more reason for this error to show up may be because of loose of faulty HDD cable.
Restarting your PC will not help in this case as you will again see the error message screen, in short, you will be stuck into an infinite reboot loop. Now you know why this error occurs, so without wasting any time let’s see how to actually Fix 0xc000000f: An Error occurred while attempting to read the boot configuration data with the below-listed troubleshooting steps.
Fix 0xc000000f: An Error occurred while attempting to read the boot configuration data
Method 1: Run Automatic/Startup Repair
1.Insert the Windows 10 bootable installation DVD or Recovery Disc and restart your PC.
2.When prompted to Press any key to boot from CD or DVD, press any key to continue.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Restart and you have successfully Fix 0xc000000f: An Error occurred while attempting to read the boot configuration data, if not, continue.
Also, read How to fix Automatic Repair couldn’t repair your PC.
Method 2: Repair or Rebuild BCD
1.Using above method open command prompt using Windows installation disk.
2.Now type the following commands one by one and hit enter after each one:
a) bootrec.exe /FixMbr
b) bootrec.exe /FixBoot
c) bootrec.exe /RebuildBcd
3.If the above command fails then enter the following commands in cmd:
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
4.Finally, exit the cmd and restart your Windows.
5.This method seems to Fix 0xc000000f: An Error occurred while attempting to read the boot configuration data but if it doesn’t work for you then continue.
Method 3: Restore your PC to an earlier working time
1.Put in the Windows installation media or Recovery Drive/System Repair Disc and select your language preferences, and click Next
2.Click Repair your computer at the bottom.
3.Now choose Troubleshoot and then Advanced Options.
4..Finally, click on “System Restore” and follow onscreen instructions to complete the restore.
5.Restart your PC to save changes.
Method 4: Check for loose or faulty HDD cable
In most of the cases, this error occurs because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Important: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC to the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix 0xc000000f: An Error occurred while attempting to read the boot configuration data.
Method 5: Run SFC and CHKDSK
1.Again go to command prompt using the method 1, just click on command prompt in the Advanced options screen.
2.Type the following command in cmd and hit enter after each one:
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
chkdsk C: /f /r /x
Note: Make sure you use the drive letter where Windows is currently installed. Also in the above command C: is the drive on which we want to run check disk, /f stands for a flag which chkdsk the permission to fix any errors associated with the drive, /r let chkdsk search for bad sectors and perform recovery and /x instructs the check disk to dismount the drive before beginning the process.
3.Exit the command prompt and restart your PC.
Once this command used, the main partition now generates the error “The first NTFS boot sector is unreadable or corrupt.” But the good thing is that it actually repairs the second partition.
Recommended for you:
That’s it you have successfully Fix 0xc000000f: An Error occurred while attempting to read the boot configuration data but if you still have any questions regarding this post then feel free to ask them in the comment’s section.