如果您使用Windows，最好有一个Windows 10 可启动 USB^{(Bootable USB)}。我的新Windows设置崩溃了，我无法使用Advanced Recovery。所以我有两个选择——寻找另一台Windows 10计算机或使用 macOS 创建可启动的USB驱动器。幸运^(Luckily)的是我有后者。很快，我就能够使用 macOS^{( using macOS)}创建一个 Windows 10 可启动 USB^{(create a Windows 10 Bootable USB)}来修复我的主计算机。

^(Create)在Mac上为 PC创建Windows 10 可启动USB

macOS 提供了一个内置工具——Boot Camp Assistant——它不仅可以在MacBook上安装^(MacBook)Windows ，还可以创建Windows 10安装程序。我们将使用相同的工具创建一个并使用它来修复Windows 10计算机。涉及的程序是：

1. 下载 Windows 10 ISO
2. ^(Create)使用Boot Camp 助理^{(Boot Camp Assistant)}创建安装程序

您将需要一个至少 8 GB 存储空间的USB驱动器。^(USB)连接到任何计算机后，您始终可以右键单击驱动器，然后检查属性以找出驱动器的大小。

1]下载Windows 10 ISO

下载ISO^(ISO)最好的部分是您不必玩任何花招。当您使用 Windows下载 ISO时，您需要欺骗它。在 macOS 和Safari上，一旦您选择了版本，Microsoft就会提供直接下载链接。

• 转到Microsoft 网站上的^{(Microsoft website)}Windows 10 ISO下载部分
• 选择 Windows 10^{(Select Windows 10)}，然后选择版本
• 它将下载ISO文件，大约 5 GB。

2]使用Boot Camp 助手^{(Boot Camp Assistant)}创建^(Create)安装程序

将 USB 驱动器插入^(MacBook)MacBook端口^(e)。在此过程中， USB^(USB)驱动器中的所有数据都将丢失。因此，如果其中有任何文件，请确保进行备份。

然后按命令键和空格键启动Spotlight搜索。^(Spotlight)键入boot camp assistant ，当它出现时，按 Enter 键启动应用程序。单击^(Click)“继续^(Continue)”按钮，然后它可能会做一些整理工作，为第二个操作系统腾出空间。花了大约20分钟。

接下来，选中“创建 Windows 10 或更高版本的安装磁盘^{(Create a Windows 10 or later version of install disk)}”框。如果有安装Windows的选项，请^(Windows)取消选择^(Deselect)。当您单击下一步时，如果ISO文件位于您的“下载^(Downloads)”文件夹中， Boot Camp 助手^{(Boot Camp Assistant)}将自动找到它。如果没有，您可以随时浏览并将其指向正确的ISO文件。

接下来，将其指向USB驱动器，这将是可引导的USB驱动器。再次单击^(Click)“继续^(Continue)”按钮并等待可启动驱动器准备就绪。它可能需要大约 20-25 分钟才能可用。

该过程完成后，请注意USB驱动器的名称现在是WININSTALL。弹出它，您就可以使用它在任何计算机上恢复或安装 Windows。

就是这样。当您无法访问Windows^(Windows)机器时，我发现这个过程要快得多，而且很方便。

Windows 10 还提供了一个类似的工具 -恢复驱动器^{(Recovery Drive)} - 允许您在 Windows 中创建应急磁盘。 确保^(Make)您始终在计算机旁边。

阅读^(Read)：如何在 Linux 上创建 Windows 10 可引导 USB。

How to create a Windows 10 Bootable USB on Mac for PC

If уou use Windows, it is always a good idea to havе a Windows 10 Bootable USB around. My new Windows setup crashed, and I had no way to use Advanced Recovery. So I had two options—find another Windows 10 computer or use a macOS to creatе a bootable USB drive. Lυckily I had the latter. In no time, I was able to create a Windows 10 Bootable USB using macOS to repair my primary computer.

Create Windows 10 Bootable USB on Mac for PC

macOS offers an inbuilt tool—Boot Camp Assistant— which not only allows installing Windows on the MacBook but also create Windows 10 installer. We will use the same tool to create one and use it to repair the Windows 10 computers. The procedure involved is:

1. Download Windows 10 ISO
2. Create installer with Boot Camp Assistant

You will need a USB drive of at least 8 GB storage space. You can always right-click on the drive after connecting to any computer, and check the properties to find out the size of the drive.

1] Download Windows 10 ISO

The best part of downloading ISO is that you don’t have to play any trick. When you use Windows to download the ISO, you need to trick it. On macOS and Safari, Microsoft offers a direct download link once you choose the version.

• Go to Windows 10 ISO download section on Microsoft website
• Select Windows 10, and then select the version
• It will download the ISO file, which should be around 5 GB.

2] Create installer with Boot Camp Assistant

Plug in the USB drive to the MacBook port. All the data in the USB drive will be lost in this process. So, make sure to take a backup if there is any file inside it.

Then launch Spotlight search by pressing the command key and the spacebar. Type boot camp assistant, and when it appears, press enter to start the app. Click on the Continue button, and then it might do some housekeeping to make space for the second OS. It took around 20 minutes.

Next, check the box which says, “Create a Windows 10 or later version of install disk.” Deselect if there is n option to install Windows. When you click next, Boot Camp Assistant will automatically locate the ISO file if it is in your Downloads folder. If not, you can always browse and point it to the right ISO file.

Next, point it towards the USB drive, which will be the bootable USB drive. Click on the Continue button again and wait till the bootable drive is ready. It might take around 20-25 minutes for it to become available.

Once the process is complete, notice that the name of the USB drive is now WININSTALL. Eject it, and you are ready to use it to recover or install Windows on any computer.

That’s it. I find the process to be much faster, and handy when you do not have access to the Windows machine.

Windows 10 also offers a similar tool-Recovery Drive – that allows you to create a rescue disk in Windows. Make sure you always one next to your computer all the time.

Read: How to create a Windows 10 bootable USB on Linux.

Related posts

• 如何在 Mac 上创建 Windows 10 可启动 USB

• 如何在Windows 10中复制或Clone Bootable USB Drive

• 如何创建Windows 10 Bootable USB Flash Drive

• 如何创建Windows 10 Bootable USB Recovery Drive

• FaceTime Camera不在Windows 10中使用Boot Camp

• 禁用Windows 10中的USB Selective Suspend Setting

• Windows 10中的启用包是什么

• USB Device不在Windows 10工作[求助]

• 使用MyLauncher为Windows 10计算机启动文件

• 如何在Windows 10格式化USB至NTFS

• 什么是 Windows 10 上的 USB 选择性暂停以及如何禁用它

• 如何创建 Windows 10 安装 U 盘

• Windows 10 Best免费Barcode Scanner software

• 如何在 Windows 10 和 Mac 上打开 Torrent 文件

• 从 Mac OS X 连接到 Windows 10 上的共享文件夹

• 如何在Windows 10上禁用Feature Updates的保障措施

• 如何修复 Windows 10 上的不可启动设备错误

• 如何禁用可移动存储类和Windows 10访问

• USB Disk Ejector让您在Windows 10中快速删除USB设备

• Windows 10上的Fix No Bootable Device Error