如果您在尝试更新Windows 10时遇到错误代码 0x8007042c ，那么您来对地方了，因为今天我们将讨论如何修复Windows 10错误 0x8007042c。由于Windows更新对于^(Windows)Windows的正常运行至关重要，但使用此错误代码，您将无法更新您的 PC，这将使其容易受到病毒和其他安全攻击。无论如何，不​​要浪费任何时间，让我们看看如何使用下面列出的指南实际修复 Windows 10^{(Fix Windows 10)} 更新错误 0x8007042c 。^{(Update Error 0x8007042c)}

修复^(Fix)Windows 10更新错误 0x8007042c^{(Update Error 0x8007042c)}

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：确保 Windows 服务正在运行^{(Method 1: Make sure Windows Services are running)}

1. 按 Windows 键 + R 然后键入services.msc 并按 Enter。

2. 找到以下服务：

后台智能传输服务 (BITS)^{( Background Intelligent Transfer Service (BITS))}
加密服务^{(Cryptographic Service)}
Windows Update
MSI 安装程序^{(MSI Installer)}

3. 右键单击​​它们中的每一个，然后选择属性^(Properties)。确保他们的启动^(A)类型^{(Startup type)}设置为自动。^(utomatic.)

4. 现在，如果上述任何服务停止，请务必单击“服务状态”下的“开始”。^{(Start under Service Status.)}

5. 接下来，右键单击Windows Update服务并选择重新启动。^(Restart.)

6. 单击应用，然后单击确定^(OK)，然后重新启动 PC 以保存更改。

看看您是否可以修复 Windows 10 更新错误 0x8007042c，^{(Fix Windows 10 Update Error 0x8007042c,)}如果不能，则继续下一个方法。

方法 2：重命名 SoftwareDistribution 文件夹^{(Method 2: Rename SoftwareDistribution Folder)}

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2. 现在键入以下命令以停止Windows 更新^{(Windows Update)} 服务^(Services)，然后在每个命令后按 Enter ：^(Enter)

网络停止 wuauserv^{(net stop wuauserv)}
网络停止 cryptSvc^{(net stop cryptSvc)}
网络停止位^{(net stop bits)}
网络停止 msiserver^{(net stop msiserver)}

3. 接下来，键入以下命令以重命名SoftwareDistribution 文件夹^{(SoftwareDistribution Folder)}，然后按 Enter^(Enter)：

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

4.最后，键入以下命令以启动Windows 更新^{(Windows Update)} 服务^(Services)并在每个命令后按 Enter ：^(Enter)

网络启动 wuauserv^{(net start wuauserv)}
网络启动 cryptSvc^{(net start cryptSvc)}
网络启动位^{(net start bits)}
网络启动 msiserver^{(net start msiserver)}

5.重新启动您的 PC 以保存更改。

方法 3：暂时禁用防病毒和防火墙^{(Method 3: Temporarily Disable Antivirus and Firewall)}

有时防病毒^(Antivirus)程序可能会导致错误，^{( error, )}要验证这里不是这种情况；您需要在有限的时间内禁用您的防病毒软件，以便您可以检查当防病毒软件关闭时错误是否仍然出现。

1. 右键单击​​系统托盘中的 防病毒程序图标^{( Antivirus Program icon)} 并选择 禁用。^(Disable.)

2. 接下来，选择 防病毒软件将保持禁用的时间范围。^{( Antivirus will remain disabled.)}

注意：选择尽可能短的时间，例如 15 分钟或 30 分钟。

3. 完成后，再次尝试连接以打开Google Chrome并检查错误是否解决。

4. 从开始菜单^{(Start Menu)}搜索栏搜索控制面板，点击打开 控制面板。^{( Control Panel.)}

5. 接下来，单击 系统和安全，^{( System and Security)} 然后单击 Windows 防火墙。^{(Windows Firewall.)}

6. 现在从左侧窗格中单击 打开或关闭 Windows 防火墙。^{( Turn Windows Firewall on or off.)}

7. 选择关闭 Windows 防火墙并重新启动您的 PC。^{(Select Turn off Windows Firewall and restart your PC.)}

再次尝试打开Google Chrome并访问之前显示^{(Google Chrome)} 错误^{( error. )}的网页。如果上述方法不起作用，请按照相同的步骤重新 打开您的防火墙。^{( turn on your Firewall again.)}

受到推崇的：^{(Recommended:)}

• 更新到 Windows 10 创意者更新后没有 Internet 连接^{(No Internet Connection after updating to Windows 10 Creators Update)}
• 修复 Windows 更新错误 0x80010108^{(Fix Windows Update Error 0x80010108)}
• 修复 Windows 10 中的错误 0X80010108^{(Fix Error 0X80010108 In Windows 10)}
• 修复文件或目录已损坏且无法读取^{(Fix The file or directory is corrupted and unreadable)}

就是这样，您已成功修复 Windows 10 更新错误 0x8007042c^{(Fix Windows 10 Update Error 0x8007042c)}，但如果您对本文仍有任何疑问，请随时在评论区提问。

Fix Windows 10 Update Error 0x8007042c

Іf you face the error code 0x8007042с while trying to update Windows 10, уou are the right place as today we will discuss how to fix Windows 10 error 0x8007042c. As Windоws updates are essential for the proper functioning of the Windows but with this error code, you won’t be able to update your PC which will make it vulnerable to virus and other secυrity attacks. Anyway, without wasting any time let’s sеe how to actually Fix Windows 10 Update Error 0x8007042c with the below-liѕted guide.

Fix Windows 10 Update Error 0x8007042c

Make sure to create a restore point just in case something goes wrong.

Method 1: Make sure Windows Services are running

1. Press Windows Key + R then type services.msc and hit Enter.

2. Locate the following services:

Background Intelligent Transfer Service (BITS)
Cryptographic Service
Windows Update
MSI Installer

3. Right-click on each of them and then select Properties. Make sure their Startup type is set to Automatic.

4. Now if any of the above services are stopped, make sure to click on Start under Service Status.

5. Next, right-click on Windows Update service and select Restart.

6. Click Apply, followed by OK and then reboot your PC to save changes.

See if you can Fix Windows 10 Update Error 0x8007042c, if not then continue with the next method.

Method 2: Rename SoftwareDistribution Folder

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Now type the following commands to stop Windows Update Services and then hit Enter after each one:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

3. Next, type the following command to rename SoftwareDistribution Folder and then hit Enter:

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

4.Finally, type the following command to start Windows Update Services and hit Enter after each one:

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

5.Reboot your PC to save changes.

Method 3: Temporarily Disable Antivirus and Firewall

Sometimes the Antivirus program can cause an error, and to verify this is not the case here; you need to disable your antivirus for a limited time so that you can check if the error still appears when the antivirus is off.

1. Right-click on the Antivirus Program icon from the system tray and select Disable.

2.  Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible, for example, 15 minutes or 30 minutes.

3. Once done, again try to connect to open Google Chrome and check if the error resolves or not.

4. Search for the control panel from the Start Menu search bar and click on it to open the Control Panel.

5. Next, click on System and Security then click on Windows Firewall.

6. Now from the left window pane click on Turn Windows Firewall on or off.

7. Select Turn off Windows Firewall and restart your PC.

Again try to open Google Chrome and visit the web page, which was earlier showing the error. If the above method doesn’t work, please follow the same steps to turn on your Firewall again.

Recommended:

• No Internet Connection after updating to Windows 10 Creators Update
• Fix Windows Update Error 0x80010108
• Fix Error 0X80010108 In Windows 10
• Fix The file or directory is corrupted and unreadable

That’s it you have successfully Fix Windows 10 Update Error 0x8007042c but if you still have any questions regarding this article then feel free to ask them in comment’s section.

Related posts

• Fix Windows Update Error Code 0x80072efe

• 如何Fix Windows Update Error 80072ee2

• Fix Windows Update Error 0x80070020

• Fix Windows Update Error 0x800704c7

• Fix Windows Update Error 0x80246002

• Fix Windows Update Error 0x80070643

• 修复 Windows 10 更新错误 0x80070103

• 修复 Windows 10 更新错误 0x8e5e0147

• Fix Windows Update Error 0x8007007e

• 修复 Windows 更新错误 0xc8000222

• Fix Error 0X80010108在Windows 10中

• Creators Update后Fix Missing Photos or Picture Icons

• 修复 Windows 11 上的更新错误 0x80888002

• Fix Windows Update Error 80244019

• Fix U-Verse Modem Gateway Authentication Failure Error

• 如何Fix Application Load Error 5:0000065434

• 修复 Windows 11 更新错误 0x800f0988

• Fix Windows Update Error 8024402F

• 修复 Windows 10 更新错误 0x80072ee7

• Fix Omegle Error Connecting至Server（2021）