当您尝试启动适用于 Linux 的 Windows 子系统时，您可能会收到以下错误消息 - WSL 停止工作并出现错误 0x80070003。^{(WSL stopped working with Error 0x80070003. )}由于您选择安装发行版的位置不再存在或已被删除或删除，因此发生错误。这是解决问题所需要做的事情。

WSL停止工作并出现错误 0x80070003^{(Error 0x80070003)}

在Windows中安装某些应用程序时遇到错误并不少见，WSL 安装^{(WSL Installation)}失败并出现错误 0x8007003 也不例外。适用于Linux的Windows 子系统^{(Windows Subsystem)}仅在您的系统驱动器（通常是您的 C: 驱动器）上运行。因此，如果您已将Distro安装到其他位置（驱动器），您将收到此错误。您应该确保分发版存储在您的系统驱动器上，因为对于这些发行版，Microsoft Store通常会覆盖设置并强制您的系统仅将其安装在您的 C: 驱动器（安装Windows的位置）上。要解决此问题，请执行以下操作。

1. 打开 Windows 设置
2. 转到系统。
3. 向下滚动到存储。
4. 切换到更多存储设置部分。
5. 单击^(Click)更改^(Change)新内容的保存位置。
6. 点击下拉^(Drop-down)按钮，新^(New)应用将保存到选项。
7. 选择所需的位置。

如果您选择了Linux发行版，请打开Windows 设置^{(Windows Settings)}。您可以直接使用 Win+I快捷方式打开它。

在设置^(Settings)屏幕下，选择系统^(System)磁贴。

向下滚动到左侧面板中的存储选项，然后单击将其打开。^(Storage)

切换到右侧并移动到更多存储^{(More Storage)}设置部分。

在它下面，单击更改新内容的保存位置^{(Change where new content is saved)}链接。

当定向到新屏幕时，点击新应用将保存^{(New apps will save)}到选项下方的下拉按钮。

选择 C: 驱动器并关闭窗口。

现在尝试再次安装WSL。您应该不会再次看到安装^{(Installation)}失败并显示错误 0x80070003 消息。

Hope it helps!

相关^(Related)：在 Windows 10 上使用 Ubuntu 无法分叉错误。

WSL stopped working with Error 0x80070003

When you try to launch Windows Subsystem for Linux, you may get the following error message – WSL stopped working with Error 0x80070003. The error occurs as the location you had selected to install your distro is no more present or has been either deleted or removed. Here’s what you need to do to fix the problem.

WSL stopped working with Error 0x80070003

It’s not unusual to encounter errors while installing some apps in Windows and the WSL Installation failed with error 0x8007003 is no different. The Windows Subsystem for Linux only runs on your system drive (usually this is your C: drive). As such, if you have installed the Distro to a different location (drive), you’ll get this error. You should make sure that distributions are stored on your system drive because, for these distros, the Microsoft Store usually overrides the setting and forces your system to install it only on your C: drive (where your Windows is installed). To fix this, do the following.

1. Open Windows Settings
2. Go to System.
3. Scroll down to Storage.
4. Switch to the More Storage settings section.
5. Click the Change where new content is saved.
6. Hit the Drop-down button for New apps will save to option.
7. Select the desired location.

If you are done with choosing the Linux distribution, open Windows Settings. You can open it directly using the Win+I shortcut.

Under the Settings screen, select the System tile.

Scroll down to the Storage option in the left panel and click to open it.

Switch to the right side and move to the More Storage settings section.

Under it, click the Change where new content is saved link.

When directed to a new screen, hit the drop-down button below New apps will save to option.

Choose the C: drive and close the window.

Now try installing WSL again. You should not see the Installation failed with the error 0x80070003 message again.

Hope it helps!

Related: Failed to Fork error with Ubuntu on Windows 10.

Related posts

• WslRegisterDistribution失败了错误：0x80370114

• WslRegisterDistribution失败了error 0x8007023e

• WslRegisterDistribution失败，error 0x8007019e或0x8000000d

• Windows 10上的Build LineageOS使用Windows Subsystem为Linux

• 如何在Windows 11/10运行.sh或Shell Script file

• Install Realtek HD Audio Driver Failure，Error OxC0000374上Windows 10

• Windows Update未下载或安装，Error 0x80070543

• Fix Error Code 30038-28更新Office时

• WslRegisterDistribution失败错误：0x80370102

• Fix Amazon PrimeVideo Error Code 7031

• WslRegisterDistribution失败，error 0xc03a001a

• Fix Valorant Error Codes 5和6在Windows PC上

• Fix Error 0xC00D3E8E，该物业在Windows 11/10只读

• Fix Service Error 79，Turn Off然后打开，在HP Printer上

• 修复：Windows 10更新失败Error 0X80242FFF

• Twitch Error 788078D4，Two-factor authentication需要流

• Fix Bdeunlock.exe Bad image，System Error或不响应错误

• Fix Canon Printer Error 853在Windows 11/10上

• 如何在 Windows 中检查适用于 Linux 的 Windows 子系统 (WSL) 版本

• 500 Internal Server Error上YouTube解释