虽然Netflix是最受欢迎的在线流媒体服务之一,但它并非完美无缺。用户不断报告问题和错误,其中之一是Netflix Error M7034。如果您在Netflix(Netflix)上流式传输节目时遇到此错误,请查看本指南以获取解决方案。
修复 Netflix 错误 M7034
Netflix Error M7034背后的原因包括Netflix政策问题、浏览器问题、IP 不一致、缓存数据损坏等。您可以选择:
- 从系统禁用和VPN或代理
- 重启调制解调器、路由器和计算机
- 检查您的WiFi信号强度
- 将您的计算机直接连接到调制解调器
如果您遇到Netflix Error M7034,请按以下顺序进行故障排除:
1]从系统禁用(Disable)和VPN或代理
大多数Netflix(Netflix)错误背后的一个众所周知的原因是用户尝试使用VPN(VPNs)和代理访问位置受限的内容。这违反了Netflix的政策,该网站将限制您访问其内容。因此,建议在流式传输Netflix时禁用系统上的任何(Netflix)VPN服务。除此之外,您需要在系统上禁用代理,如下所示:
单击开始并转到Settings>>Network and Internet>>Proxy。
在手动代理设置下,(Manual proxy settings)关闭(OFF)使用代理服务器(Use a proxy server)的开关。
2]重启(Power)调制解调器,路由器和计算机
如果Netflix 错误 M7034(Netflix Error M7034)是由IP/TCP不一致引起的,您可以考虑重启调制解调器、路由器和计算机的电源。这样做的过程如下:
关闭所有(OFF)三个设备,即调制解调器、路由器和计算机。
仅打开调制解调器并等待调制解调器上的所有指示灯稳定。
现在,打开路由器并等待路由器上的所有灯都稳定。
最后,打开电脑。
这应该有助于选择正确的 IP。如果它不能解决您的问题,请继续进行进一步的解决方案。
3]检查您的(Check)WiFi信号强度
虽然您可能正在使用高速互联网连接,但您不必通过 WiFi 连接获得正确的速度。在Netflix的情况下,这一点变得很重要,因为该服务需要至少 3MBPS 的正常流媒体速度和至少 5MBPS 的高清流媒体速度。许多免费的互联网速度测试工具(free Internet speed test tools)可能对此有所帮助。相反,您的系统工作的互联网速度应该比这些阈值高一点,因为其他系统进程也可能正在使用网络资源。
您可以通过将路由器靠近您的系统或使用有线LAN访问 Internet 来解决此问题。
4]将您的计算机直接连接到调制解调器(Connect)
如果您的调制解调器有以太网端口,您可以考虑绕过路由器并将系统直接连接到调制解调器硬接线。如果这不起作用,请拔下调制解调器 30 秒,然后重新连接。
如果将系统直接连接到调制解调器可以解决问题,则问题可能出在路由器上。如果没有,问题可能出在ISP上。
希望能帮助到你!
Fix Netflix Error M7034 and enjoy Netflix uninterrupted
While Netflix is one of the most popular online streaming services, it isn’t flawless. Users keep reporting issues and errors, one of which is Netflix Error M7034. If you encounter this error while streaming shows on Netflix, check this guide for the resolution.
Fix Netflix Error M7034
The causes behind Netflix Error M7034 include Netflix policy issues, browser issues, IP inconsistency, corrupt cache data, etc. The options you have are:
- Disable and VPN or proxies from the system
- Power cycle the modem, router, and computer
- Check the strength of your WiFi signal
- Connect your computer directly to the modem
In case you encounter Netflix Error M7034, proceed with the troubleshooting sequentially as follows:
1] Disable and VPN or proxies from the system
A well-known cause behind most Netflix errors is that users try accessing location restricted content using VPNs and proxies. This is against Netflix’s policies and the website will restrict your access to its content. Thus, it is advised to disable any VPN service on your system while streaming Netflix. Other than this, you would need to disable proxies on your system as follows:
Click on Start and go to Settings>>Network and Internet>>Proxy.
Under Manual proxy settings, turn the switch OFF for Use a proxy server.
2] Power cycle the modem, router, and computer
If Netflix Error M7034 is caused by IP/TCP inconsistency, you could consider power cycling the modem, router, and computer. The procedure to do so is as follows:
Switch OFF all the three devices, the modem, router, and computer.
Switch ON the modem only and wait till all lights on the modem are stable.
Now, switch ON the router and wait till all lights on the router are stable.
Finally, switch ON the computer.
This should help in picking up the correct IP. If it doesn’t resolve your problem, proceed to further solutions.
3] Check the strength of your WiFi signal
While you might be using a high-speed internet connection, it isn’t necessary that you get the right speed over a WiFi connection. In the case of Netflix, it becomes important since the service needs a speed of at least 3MBPS for normal streaming and at least 5MBPS for HD streaming. A lot of free Internet speed test tools could be helpful for the same. Rather, the internet speed your system works on should be a little higher than these thresholds since other system processes might be using network resources too.
You can resolve this issue by bringing the router closer to your system or using a wired LAN for accessing the internet.
4] Connect your computer directly to the modem
In case your modem has an ethernet port, you could consider bypassing your router and connecting your system directly to the modem hard-wired. If this doesn’t work, unplug your modem for 30 seconds and then reconnect it.
If connecting your system directly to the modem resolves the problem, the issue is probably with the router. If not, the problem could be with the ISP.
Hope it helps!