虽然将无线 Xbox One^{(Wireless Xbox)}控制器连接到Windows 11/10 PC 相当简单（通过USB电缆或通过蓝牙^(Bluetooth)），但一些用户报告他们的无线 Xbox One 控制器需要^{(Wireless Xbox One controller requires a PIN)}Windows Windows 11/10的 PIN 。通过蓝牙^(Bluetooth)连接的步骤非常简单。

要将Xbox 无线控制器^{(Xbox Wireless Controller)}连接到您的Windows 11/10 电脑，您需要一个适用于Windows的^(Windows)Xbox 无线适配器^{(Xbox Wireless Adapter)}。许多笔记本电脑都内置了这个功能。否则你需要买它。因此，如果您一直在尝试将其连接到您的普通蓝牙适配器，那么它要求^(Bluetooth)输入 PIN^(PIN)也就不足为奇了。因此，假设您使用的是推荐的适配器，并且它仍然要求输入PIN，请按照以下指南进行操作。

无线 Xbox One^{(Wireless Xbox One)}控制器需要 PIN

有趣的是，许多用户都尝试将^{(users have tried connecting)}其连接到MacBook，并且成功了。Xbox One根本不是问题，它只是连接到导致所有这些问题的Windows 11/10好消息是您无需在任何地方找到任何PIN 码^(PIN)即可解决此问题，只需更新您的Xbox One控制器驱动程序即可。很多时候驱动程序与Windows 11/10版本不匹配并导致此类问题。

请按照以下步骤更新 Xbox One 控制器驱动程序：^{(Follow the steps below to Update Xbox One Controller Driver:)}

1. 按住控制器上的 Xbox 按钮将其关闭^{(Xbox button on the controller to turn it off)}。关闭后，将其保持在该状态几分钟。您也可以取下电池组，然后放置几分钟。
2. 再次使用 Xbox 按钮将其重新打开。
3. 现在，使用USB电缆将您的无线控制器连接到Xbox以更新驱动程序。
4. 要手动检查更新，请打开其设置 > Kinect 和设备 >设备^(Devices)和配件 > 选择您的控制器，然后更新。

   

5. 在您的Windows 10 PC 上，确保更新适用于 Windows 的 Xbox无线^(Windows)适配器^{(Xbox Wireless Adapter)}的驱动程序。只需^(Just)检查是否有待更新的更新。如果是，请更新它，然后重新启动您的 PC。
6. 现在尝试通过蓝牙^(Bluetooth)连接您的 Xbox控制器^(Controller)，它应该可以解决您的问题。

如果您没有Xbox One PC，并且您购买了控制器以在您的 PC 上玩它，则可以通过USB更新^(USB)Windows 11/10 PC上的控制器^{(update the controller)}。按照上面的链接。您需要  从 Windows Store下载^{(Windows Store)}Xbox Accessories 应用程序^{(Xbox Accessories app)}。它与Xbox One中用于配置和管理Xbox One控制器的应用程序相同。

Xbox One控制器的PIN 码^(PIN)在哪里？

Xbox One 控制器^{(Xbox One Controller)}的PIN 码^(PIN)写在设备随附的控制器包装上。在大多数情况下，默认PIN为 0000 或 1234。但是，在 Windows 11/10 计算机上输入PIN之前，您必须检查包装。^(PIN)

为什么我的无线Xbox控制器无法连接到我的 PC？

无线 Xbox 控制器无法连接到计算机的原因可能有多种。这可能是由于设置不正确、PIN错误、蓝牙^(Bluetooth)问题等原因造成的。根据情况，您可以执行不同的提示和技巧来消除问题。

阅读： ^(Read: )修复 Xbox 控制器蓝牙在 Xbox 控制台或 PC 上不断断开连接^{(Fix Xbox Controller Bluetooth keeps disconnecting on Xbox console or PC)}

Wireless Xbox One controller requires PIN for Windows 11/10

While connecting a Wireless Xbox controller to a Windows 11/10 PC is fairly simple (either via USB cable or through Bluetooth), some users are reporting that their Wireless Xbox One controller requires a PIN for Windows 11/10.  The steps are pretty simple to connect over Bluetooth.

To connect Xbox Wireless Controller to your Windows 11/10 PC, you need to have an Xbox Wireless Adapter for Windows. Many Laptops have this inbuilt; else you need to buy it. So if you have been trying to connect it to your normal Bluetooth adapter, it’s not a surprise that it is asking for a PIN. So assuming that you are using the recommended adapter, and it is still asking for the PIN, follow the guide below.

Wireless Xbox One controller requires a PIN

Interesting to note that many users have tried connecting it to the MacBook, and it worked. Xbox One is not an issue at all, it is just connecting to the Windows 11/10 PC that is causing all these problems. The good news is that you don’t have to find any PIN anywhere to fix this, but only update your Xbox One controller driver. Many a time drivers are a mismatch with the Windows 11/10 version and cause this sort of problem.

Follow the steps below to Update Xbox One Controller Driver:

1. Hold the Xbox button on the controller to turn it off. Once it’s turned off, keep it in that state for a few minutes.  You can also take off the battery pack, and leave it for few minutes.
2. Turn it back on using the Xbox button again.
3. Now, connect your wireless controller to the Xbox using a USB cable to update drivers.
4. To check for updates manually, open its Settings  > Kinect & devices >Devices & accessories > select your controller, and update.

   

5. On your Windows 10 PC, make sure to update the drivers of your Xbox Wireless Adapter for Windows. Just check if there is an update pending. If yes, update it, and restart your PC.
6. Now try connecting your Xbox Controller over Bluetooth, and it should resolve your problem.

If you do not have an Xbox One PC, and you bought the controller to play it on your PC, it is possible to update the controller on the Windows 11/10 PC as well over USB. Follow the link above. You will need to download the  Xbox Accessories app from the Windows Store. It’s the same app which is used in Xbox One to configure and manage Xbox One controller.

Where is the PIN for Xbox One controller?

The PIN for Xbox One Controller is written on the controller’s package that came with your device. In most cases, the default PIN is either 0000 or 1234. However, you must check the package before entering the PIN on your Windows 11/10 computer.

Why won’t my wireless Xbox controller connect to my PC?

There could be various reasons why your wireless Xbox controller cannot connect to your computer. It may happen due to incorrect settings, wrong PIN, Bluetooth problems, and so on. Depending upon the situation, you can execute different tips and tricks to eliminate the issue.

Read: Fix Xbox Controller Bluetooth keeps disconnecting on Xbox console or PC

Related posts

• 如何在Windows 10 PC上更新Xbox One controller

• Fix Wireless Xbox One controller需要Windows 10 PIN

• 如何在Windows 11/10 PC上播放任何Xbox Game

• 如何用控制台重新连接Wireless Xbox One controller

• Fix Xbox游戏不会在Windows 11/10 PC上安装

• Taskbar or Start Menu在Windows 10中的Pin or Unpin Program icons

• 如何在Windows 10 Control Panel中打开System Properties

• Fix High CPU Usage Windows 10 Fix High CPU Usage

• 视窗10同步设置不工作灰色

• 如何在Windows 10计算机中更改默认Webcam

• Microsoft Intune不同步？ Force Intune在Windows 11/10中同步

• 在Windows 11/10中启用或禁用Game DVR or Game Bar

• Windows 10中的Stop自动连接到Wireless Network

• 如何在Windows 10中更改BitLocker PIN

• Windows 10中的Fix Wireless Display Install Error失败

• Manage Wireless Networks在Windows 10中使用Command Prompt

• Forget Wireless Network Profiles在Windows 11/10

• 如何检查在Windows 10的Shutdown and Startup Log

• 启用或禁用Windows 11/10 Xbox app Automatic Startup

• Fix Crypt32.dll未找到或缺少Windows 11/10错误