在过去的二十年里,在线(Online)游戏一直在蓬勃发展。如今, (Nowadays)Xbox One等流行游戏机为用户提供了全面的在线游戏体验。随着技术的进步,玩家现在可以在玩游戏时与其他玩家联系。然而,由于游戏行业相对较新,人们不时会面临某些问题。其中一个问题是Xbox One的高丢包率,游戏服务器无法从服务器接收数据(unable to receive data from the server)。它会导致您的Xbox One(Xbox One)和游戏服务器(Game Server)之间交换的部分数据丢失. 一直困扰着很多玩家的在线体验。此外,此问题可能表现为连接超时(timeouts in connection)或网络崩溃。此问题也可能导致高 ping 问题(high ping problem)。在本文中,我们将讨论一些解决Xbox和Xbox One上的高丢包率的解决方案。继续阅读以了解更多信息!
如何修复(How to Fix )Xbox 或 Xbox One(Xbox or Xbox One )高丢包率
(High Packet Loss
)
当出现 Xbox 高丢包问题时,说明用户正在玩的网络游戏服务器没有收到完整的数据。由于这是一个与网络相关的问题,因此,主要原因是以连接为中心。然而,还有其他以游戏为中心的原因。
-
繁忙的(Busy) 游戏服务器(Game Server–)- 数据需要一些空间来传输比特率。但是,如果服务器不能适应比特率流,那么数据就不会被传输。简而言之,如果游戏服务器已满,则它可能无法接收或传输更多数据。
-
服务器端泄漏——(Server-side Leaks – )如果您要向其发送数据的服务器中存在数据泄漏问题,那么您转发的数据将会丢失。
-
弱连接强度(Weak Connection Strength)——随着游戏机的修改,游戏规模也以相同的比例增长。我们现在拥有具有巨大文件大小的视觉上令人愉悦的游戏。因此,如果您的互联网连接较弱,则可能无法将如此大的文件发送到服务器。
-
硬件问题——(Hardware issues – )如果您使用的是缺乏连接速度的旧电缆,那么您也可能会遇到这个问题。并非所有网线都能承载如此高的内存数据速率,因此更换合适的网线即可解决此问题。
方法一:避开高峰时间(Method 1: Avoid Peak Time)
- 很多用户在服务器人满为患的情况下玩游戏都会遇到这个问题。由于解决此问题的方法不多,因此您可以更改播放时间和/或避免高峰时段。
- 建议访问Xbox Live 状态页面(Xbox Live Status Page)以检查问题是来自服务器端还是您的问题。
方法二:重启游戏机(Method 2: Restart Gaming Console)
考虑到经典的重启方法在大多数情况下都可以解决问题,因此这种方法具有很大的相关性。
注意:(Note:) 确保(Make)在重新启动控制台之前关闭所有游戏。
1. 按Xbox 按钮(Xbox button)(突出显示)以打开指南。(Guide.)
2. 转到Profile & system > Settings > General > Power mode & start-up。
3. 最后,通过选择立即重新启动(Restart now)选项确认重新启动控制台。等待(Wait)Xbox控制台重新启动。(Xbox)
或者,将控制台与电源线完全断开也有助于解决Xbox高丢包率问题。
另请阅读:(Also Read:) 如何在 Xbox One 上进行游戏共享(How to Gameshare on Xbox One)
方法三:重启网络路由器(Method 3: Restart Network Router)
重新启动路由器还可以帮助消除许多与网络相关的问题。
1.从电源线上拔下Modem/Router
2. 等待大约60 秒(60 seconds),然后将其插入。
专业提示(Pro Tip):更改路由器的 QoS 功能(QoS feature of the router)也可能有助于解决此问题。
方法 4:切换 Internet 连接(Method 4: Switch Internet Connections)
如果存在与网络相关的问题,那么切换您的 Internet 连接可以帮助解决Xbox One高丢包率问题。
1.用更高速度(higher speed connection)的连接替换当前的互联网计划/连接。
2.避免使用移动热点(Avoid using Mobile Hotspot)进行在线游戏,因为速度将不一致,并且在限制后数据可能会耗尽。
3. 尝试使用有线连接(wired connection)而不是无线连接,如图所示。
另请阅读:(Also Read:) 如何修复 Xbox One 错误代码 0x87dd0006(How to Fix Xbox One Error Code 0x87dd0006)
方法5:使用VPN(Method 5: Use VPN)
如果您的ISP即Internet 服务提供商(Internet Service Provider)占用了您的带宽,导致网速变慢,那么您可以尝试使用VPN进行连接。
- 它将帮助您获得另一个IP 地址(IP Address),从而帮助您提高速度。
- 它可用于解锁某些服务器。
- 此外,它还可以帮助您保护数据流量免受大多数在线威胁或恶意软件的侵害。
因此(Hence),用VPN 连接(VPN Connection)连接您的 PC 或笔记本电脑(Laptop),然后将同一网络连接到您的控制台(Console)。VPN的效果将反映在游戏机的性能上,从而解决Xbox One高丢包问题。
1. 打开任意网络浏览器(Web Browser),进入NordVPN主页(NordVPN homepage)。
2. 单击获取 NordVPN(Get NordVPN)按钮进行下载。
3.下载后,运行安装程序.exe文件(.exe file)。
方法 6:修复硬件相关问题(Method 6: Fix Hardware-Related Issues)
检查您的硬件是否有任何损坏。
1.如果需要,请检查和维修您的控制台。(Get your console checked)
2. 确认线缆是否与Router & Console(cables correspond to Router & Console)型号对应。更换与调制解调器相关的旧电缆。
注意:(Note:)根据连接速度,每个连接可能需要不同的网络电缆。
3.更换损坏或磨损的电缆(Replace damaged or worn-out cables)。
另请阅读:(Also Read:) 修复 Xbox One 过热和关闭问题(Fix Xbox One Overheating and Turning Off)
方法 7:重置您的控制台(Method 7: Reset Your Console)
有时,重置您的控制台可以解决与其相关的所有问题,包括Xbox(Xbox)上的高丢包率。
1.按控制台上的Xbox 按钮启动(Xbox button)Xbox 菜单。(Xbox Menu )
2. 转到个人(P)资料和系统(rofile & system )>设置( Settings)。
3. 从左侧窗格中选择系统(System)选项,然后从右侧窗格中选择控制台信息(Console info)选项。
4. 现在,选择重置控制台(Reset console)。
5. 选择以下两个选项之一。
-
重置并删除所有内容:(Reset and remove everything: )它将从您的控制台中删除所有内容,包括所有应用程序和游戏
-
重置并保留我的游戏和应用程序:(Reset and keep my games & apps: )这不会删除您的游戏和应用程序。
6. 最后,等待Xbox主机重置。在此(Hereon),您在游戏过程中不应该遇到任何问题。
量化丢包(Quantifying Packet Loss)
在线游戏过程中发生的丢包情况各不相同。有时,您可能会丢失更多数据,而且通常您可能只会丢失分钟数据。丢包率(Packet Loss)排名标准如下:
1. 如果发送的数据less than 1%,则认为是一个好的(good) 丢包。(Packet Loss.)
2.如果损失在1%-2.5%,则认为可以接受(acceptable)。
3. 如果数据丢失above 10%,则认为是重大(significant)的。
如何测量数据包丢失(How to Measure Data Packet Loss)
数据包丢失(Data Packet Loss)可以通过您的Xbox One使用内置选项轻松测量,如下所述:
1. 像之前一样导航到Xbox 设置(Xbox Settings)。
2. 现在,选择General > Network settings.
3. 在这里,选择Detailed network statistics,如图所示。您将能够查看您是否面临上游或下游数据包丢失。
专业提示:(Pro Tip:)访问Xbox 支持页面(Xbox Support page)以获得更多帮助。
受到推崇的:(Recommended:)
按照本指南中列出的方法,您应该能够解决Xbox和 Xbox One(& Xbox One)上的高丢包率问题(high packet loss on Xbox) 。在下面的评论部分分享您的反馈。
Fix High Packet Loss on Xbox
Online gaming has been booming for the last two decades. Nowadays, popular consoles like Xbox One provide the user with a hоlіstic online gaming experience. With the advancement in technologу, gamers can now connect with othеr players while playing gameѕ. However, since the gaming industry is relativelу new, people face certain kinds of issuеs from time to time. One such problem iѕ Xbox One high packet loss where the game server іs unable to receive data from the server. It leads to the loss of the portion of data that was meant to be exchanged between your Xbox One and the Game Server. It has been plaguing the online experience of many players. Moreover, this problem can manifest as timeouts in connection or network crashes. This issue can also cause a high ping problem. In this article, we will discuss some solutions to fix high packet loss on Xbox and Xbox One. Continue reading to know more!
How to Fix Xbox or Xbox One High Packet Loss
When there is an Xbox high packet loss issue, it implies that the server of the online game being played by the user is not receiving the complete data. Since this is a network-related issue, thus, the main causes are connection-centric. However, there are other game-centric reasons as well.
-
Busy Game Server– The data needs some space for the bit rate to flow. But, if the server cannot accommodate the bit rate flow, then the data would not get transferred. In simpler words, if the game server is full to its limit, then it may be unable to receive or transmit any more data.
-
Server-side Leaks – If there is an issue of data leak in the server to which you are sending the data, then the data you forward will get lost.
-
Weak Connection Strength – As the gaming consoles have been modified, the game sizes have also grown in the same proportion. We now have visually pleasing games with massive file sizes. So, if you have a weak internet connection, it may not be able to send such big files to the server.
-
Hardware issues – If you are using old cables that lack connection speed, then also you can face this issue. Not all network cables can carry such high memory data rate, so replacing them with suitable ones can fix this problem.
Method 1: Avoid Peak Time
- Many users face this issue if they play games when the server is overcrowded. Since there is not much that can be done to fix this problem, you can either change your playing time and/or avoid peak hours.
- It is advised to visit Xbox Live Status Page to check whether the issue is from the server-side or yours.
Method 2: Restart Gaming Console
Considering the classic method of restarting resolves the issue most of the time, this method is of great relevance.
Note: Make sure to close all your games before restarting the console.
1. Press the Xbox button, shown highlighted to open the Guide.
2. Go to Profile & system > Settings > General > Power mode & start-up.
3. Finally, confirm to restart your console by selecting Restart now option. Wait for the Xbox console to restart.
Alternately, completely disconnecting your Console from power cables should also help to fix Xbox high packet loss issue.
Also Read: How to Gameshare on Xbox One
Method 3: Restart Network Router
Restarting your router can also aid in eliminating many network-related issues.
1. Unplug the Modem/Router from the power cable.
2. Wait for around 60 seconds, then plug it in.
Pro Tip: Changing the QoS feature of the router might also help with this issue.
Method 4: Switch Internet Connections
If there is a network-related issue, then switching your internet connection can help fix Xbox One high packet loss problem.
1. Replace the current internet plan/connection with a higher speed connection.
2. Avoid using Mobile Hotspot for online gaming as speeds will not be consistent and data may get exhausted after a limit.
3. Try using a wired connection instead of wireless, as shown.
Also Read: How to Fix Xbox One Error Code 0x87dd0006
Method 5: Use VPN
If your ISP i.e. Internet Service Provider is holding up your bandwidth, leading to slow internet speed, then you can try using a VPN for your connection.
- It will aid you in getting another IP Address which in turn may help you to increase your speed.
- It can be used to unblock certain servers.
- Further, it helps you in keeping your data traffic safe from most online threats or malware.
Hence, connect your PC or Laptop with a VPN Connection and then connect the same network to your Console. The effect of the VPN will reflect in the performance of your gaming console thereby, fixing Xbox One high packet loss issue.
1. Open any Web Browser and go to the NordVPN homepage.
2. Click on the Get NordVPN button to download it.
3. After downloading, run the installer .exe file.
Method 6: Fix Hardware-Related Issues
Check your hardware for any damage.
1. Get your console checked and repaired if required.
2. Confirm whether cables correspond to Router & Console model or not. Replace your old cables with relevance to the modem.
Note: Each connection might need a different network cable according to the speed of the connection.
3. Replace damaged or worn-out cables.
Also Read: Fix Xbox One Overheating and Turning Off
Method 7: Reset Your Console
At times, resetting your console can fix all the problems pertaining to it including high packet loss on Xbox.
1. Launch Xbox Menu by pressing the Xbox button on the console.
2. Go to Profile & system > Settings.
3. Select the System option from the left pane and then, select the Console info option from the right pane.
4. Now, select Reset console.
5. Select any one of the two following options.
-
Reset and remove everything: It will erase everything from your console including all apps and games
-
Reset and keep my games & apps: This will not erase your games and apps.
6. Finally, wait for the Xbox console to reset. Hereon, you should not face any issues during gameplay.
Quantifying Packet Loss
The packet loss which occurs during online gaming varies. At times, you may lose more data, and often, you might just lose minute data. The ranking standard for Packet Loss is enlisted below:
1. If less than 1% of the data is sent, then it is considered as a good Packet Loss.
2. If the loss is around 1%-2.5%, then it is considered acceptable.
3. If the data loss is above 10%, then it is considered significant.
How to Measure Data Packet Loss
Data Packet Loss can be easily measured through your Xbox One using an in-built option, as explained below:
1. Navigate to Xbox Settings as earlier.
2. Now, select General > Network settings.
3. Here, choose Detailed network statistics, as shown. You will be able to view whether you are facing upstream or downstream data packet loss.
Pro Tip: Visit the Xbox Support page for further assistance.
Recommended:
By following the methods listed in this guide, you should be able to resolve high packet loss on Xbox & Xbox One. Share your feedback in the comments section below.