修复错误 1962:未找到操作系统: (Fix Error 1962: No Operating System Found: )如果您遇到此错误,则可能是由于引导顺序损坏或引导顺序优先级配置不正确。在任何情况下,当您尝试启动您的 PC 时,您将无法启动您的操作系统,而是您将面临错误 1962未(Error 1962) 找到操作系统(No Operating System Found)消息并且您别无选择,只能重新启动您的 PC这将再次使您进入相同的错误消息屏幕。
Error 1962: No operating system found. Boot sequence will automatically repeat.
错误 1962 的奇怪之处在于,用户在等待几个小时后可能能够成功启动到Windows ,但并非所有人都这样。(Windows)因此,您可以在等待几个小时后检查是否可以访问您的系统。而(Whereas)一些受影响的用户甚至无法进入BIOS设置,因为在计算机启动后立即显示错误 1962 (Error 1962) No Operating System Found消息。(No Operating System Found)
好吧,现在您对错误 1962 了解得够多了,让我们看看如何实际修复此错误。关于此错误的好处也可能是由于将硬盘连接到主板的SATA电缆故障而引起的。(SATA)因此,您需要执行各种检查以确定启动时出现错误 1962未(Error 1962) 找到操作系统(No Operating System Found)消息的原因。在不浪费任何时间的情况下,让我们看看如何使用下面列出的故障排除方法实际解决此问题。
错误 1962:未找到操作系统 [已解决]
在尝试任何高级步骤之前,我们需要检查是硬盘(Hard)故障还是SATA电缆故障。为了检查硬盘是否正常工作,请将其连接到另一台计算机并验证您是否能够访问它,如果您能够访问,则不是硬盘(Hard)故障的情况。但是,如果您仍然无法访问另一台 PC 上的硬盘,那么您需要更换硬盘(Hard)。
现在检查SATA电缆是否有故障,只需使用另一根PC电缆检查电缆是否有故障。如果是这种情况,那么只需购买另一条SATA电缆就可以为您解决问题。既然您已经验证了是否不是HDD或SATA电缆故障的情况,那么您可以继续执行下面列出的步骤。
注意:(Note:)为了尝试以下修复,您需要使用Windows 安装(Windows Installation)或恢复(Recovery)光盘,因此请确保您事先准备好其中的任何一个。
Method 1: Run Automatic/Startup Repair
1.插入Windows 10可启动安装DVD并重新启动您的 PC。
2.当提示Press any key to boot from CD or DVD时,按任意键继续。
3.选择您的语言首选项,然后单击下一步(Next)。单击左下角的修复计算机。(Click Repair)
4.在选择选项屏幕上,单击疑难解答(Troubleshoot)。
5.在疑难解答屏幕上,单击高级选项(Advanced option)。
6.在高级(Advanced)选项屏幕上,单击自动修复或启动修复(Automatic Repair or Startup Repair)。
7. 等待Windows Automatic/Startup Repairs完成。
8.重新启动,您已成功 修复错误 1962 未找到操作系统。( Fix Error 1962 No Operating System Found.)
另外,请阅读 如何修复自动修复无法修复您的 PC。(How to fix Automatic Repair couldn’t repair your PC.)
方法 2:运行诊断测试(Method 2: Run Diagnostic Test)
如果上述方法根本没有帮助,那么您的硬盘可能已损坏或损坏。在任何情况下,您都需要用新的HDD或SSD更换并重新安装Windows。但在得出任何结论之前,您必须运行诊断工具(run a Diagnostic tool)来检查您是否真的需要更换HDD/SSD。
要运行Diagnostics重新启动您的 PC 并在计算机启动时(在引导屏幕之前),按F12键,当Boot菜单出现时,突出显示Boot to Utility Partition选项或Diagnostics选项,然后按 enter 启动Diagnostics。这将自动检查系统的所有硬件,并在发现任何问题时进行报告。
方法 3:设置正确的引导顺序(Method 3: Set correct boot order)
您可能会看到“错误 1962 未找到操作系统(Error 1962 No Operating System Found)”,因为未正确设置引导顺序,这意味着计算机正在尝试从另一个没有操作系统的源引导,因此无法这样做。为了解决此问题,您需要将硬盘设置为(Hard Disk)引导(Boot)顺序中的最高优先级。让我们看看如何设置正确的启动顺序:
1.当您的计算机启动时(在启动屏幕或错误屏幕之前),反复按Delete或 F1 或 F2 键(取决于您的计算机制造商)进入 BIOS 设置(enter BIOS setup)。
2.进入BIOS设置后,从选项列表中选择Boot选项卡。
3.现在确保将计算机硬盘或SSD设置为引导顺序中的最高优先级(Hard disk or SSD is set as a top priority in the Boot order)。如果没有,则使用向上或向下箭头键将硬盘设置在顶部,这意味着计算机将首先从它启动,而不是从任何其他源启动。
4.完成上述更改后,转到“启动(Startup)”选项卡并进行以下更改:
Primary Boot Sequence
CSM: [ Enable ]
Boot Mode: [Auto]
Boot Priority: [UEFI First] Quick Boot : [ Enable ]
Boot up Num-lock Status : [On]
5.按F10保存并退出BIOS设置中的更改。
方法 4:启用 UEFI 引导(Method 4: Enable UEFI Boot)
大多数UEFI固件(统一可扩展(Extensible) 固件(Firmware) 接口(Interface))要么包含错误,要么具有误导性。这是因为固件的频繁演变使得UEFI过于复杂。错误 1962 No Operating System Found似乎是由UEFI固件引起的,当您重置或设置(UEFI)UEFI的默认值时,它似乎可以解决问题。
如果要引导到旧版操作系统((System) OS) ,则必须配置CSM (兼容性支持模块)以启用。(Compatibility Support Module)如果您最近升级了 Windows 安装,则默认情况下禁用此设置,这会禁用对旧操作系统的支持,这(System)反过来又不会让您启动到操作系统。现在注意将UEFI设置为第一个或唯一的引导方法(这已经是默认值)。
1.重新启动您的PC,然后根据您的PC点击F2或DEL以打开(tap F2 or DEL)Boot Setup。
2.转到启动(Startup)选项卡并进行以下更改:
Change Boot list option to UEFI
Disable Load Legacy option ROM
Enable Secure boot
3.(Exit)接下来,点击F10保存(Save)并退出启动设置。
方法 5:使用恢复光盘恢复您的 PC(Method 5: Restore your PC using Recovery Disc)
1.放入Windows安装媒体或Recovery Drive/System Repair Disc并选择您的语言首选项(anguage preferences),然后单击下一步
2.单击底部的修复计算机。( Repair)
3.现在选择疑难解答(Troubleshoot),然后选择高级选项。(Advanced Options.)
4..最后,点击“系统还原(System Restore)”并按照屏幕提示完成还原。
5.重新启动您的PC,此步骤可能会出现 Fix Error 1962 No Operating System Found。
方法6:修复安装Windows 10(Method 6: Repair Install Windows 10)
如果上述解决方案都不适合您,那么您可以确定您的HDD没有问题,但您可能会看到错误“ Error 1962 No Operating System Found ”,因为操作系统或HDD上的(HDD)BCD信息以某种方式被删除了。好吧(Well),在这种情况下,您可以尝试修复安装 Windows ,但如果这也失败了,那么剩下的唯一解决方案就是安装(Repair install Windows)Windows的新副本(全新安装(Clean Install))。
为你推荐:(Recommended for you:)
就是这样,您已成功修复错误 1962:未找到操作系统(Fix Error 1962: No Operating System Found),但如果您对本指南仍有任何疑问,请随时在评论部分提问。
Error 1962: No Operating System Found [SOLVED]
Fix Error 1962: No Operating System Found: If you are facing this error then it may be because of corrupt boot sequence or the boot order priority might be not configured correctly. In any case, you when you try to boot your PC you won’t be able to boot your operating system instead you will be faced with the Error 1962 No Operating System Found message and you won’t have any option but to restart your PC which will again land you on the same error message screen.
Error 1962: No operating system found. Boot sequence will automatically repeat.
The strange thing with the error 1962 is that user might be able to successfully boot to Windows after waiting for few hours but that might not be the case with everyone. So you can check if you can access your system after waiting for few hours. Whereas some affected users can’t even get into BIOS setup as the Error 1962 No Operating System Found message is displayed immediately after the computer boots up.
Well, now you know enough about error 1962 let’s see how to actually fix this error. The good thing about this error it can also be caused simply because of faulty SATA cable which connects your Hard disk to the motherboard. So you need to perform various checks in order to determine the cause of Error 1962 No Operating System Found message on boot. Without wasting any time let’s see how to actually fix this issue with the below-listed troubleshooting methods.
Error 1962: No Operating System Found [SOLVED]
Before trying any advanced steps we need to check whether it’s a case of faulty Hard disk or the SATA cable. In order to check if the hard disk is working or not, connect it to another computer and verify if you’re able to access it, if you’re able to then it’s not the case of the faulty Hard disk. But if you’re still not able to access the hard disk on another PC then you need to replace your Hard disk.
Now check if the SATA cable is at fault, just use another PC cable in order to check if the cable is faulty. If this is the case then simply buying another SATA cable might fix the issue for you. Now that you have verified if it’s not the case of faulty HDD or SATA cable then you can continue to the below-listed steps.
Note: In order to try below fixes you need to use Windows Installation or Recovery disc, so make sure you are ready with any one of them before hand.
Method 1: Run Automatic/Startup Repair
1.Insert the Windows 10 bootable installation DVD and restart your PC.
2.When prompted to Press any key to boot from CD or DVD, press any key to continue.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Restart and you have successfully Fix Error 1962 No Operating System Found.
Also, read How to fix Automatic Repair couldn’t repair your PC.
Method 2: Run Diagnostic Test
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
To run Diagnostics restart your PC and as the computer starts (before the boot screen), press F12 key and when the Boot menu appears, highlight the Boot to Utility Partition option or the Diagnostics option and press enter to start the Diagnostics. This will automatically check all the hardware of your system and will report back if any issue is found.
Method 3: Set correct boot order
You may be seeing the “Error 1962 No Operating System Found” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.When your computer starts (Before the boot screen or the error screen), repeatedly press Delete or F1 or F2 key (Depending upon your computer’s manufacturer) to enter BIOS setup.
2.Once you are in BIOS setup select Boot tab from the list of options.
3.Now make sure that the computer Hard disk or SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Once above changes are done move to the Startup tab and make the following changes:
Primary Boot Sequence
CSM: [Enable]
Boot Mode: [Auto]
Boot Priority: [UEFI First]
Quick Boot: [Enable]
Boot up Num-lock Status: [On]
5.Press F10 to save and exit changes in the BIOS setup.
Method 4: Enable UEFI Boot
Most UEFI firmware (Unified Extensible Firmware Interface) either contains bugs or are misleading. This is because of the frequent evolution of the firmware which has made UEFI too complicated. The Error 1962 No Operating System Found seems to be caused by UEFI firmware and when you reset or set the default value of UEFI it seems to fix the issue.
You have to configure CSM (Compatibility Support Module) to enable if you want to boot to a legacy Operating System (OS). If you have recently upgraded your Windows installation then this setting is disabled by default which disables the support for the older Operating System’s which in turn won’t let you boot to OS. Now be careful to set the UEFI as the first or only boot method (which is already the default value).
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Go to the Startup tab and make the following changes:
Change Boot list option to UEFI
Disable Load Legacy option ROM
Enable Secure boot
3.Next, tap F10 to Save and Exit the boot setup.
Method 5: Restore your PC using Recovery Disc
1.Put in the Windows installation media or Recovery Drive/System Repair Disc and select your language preferences, and click Next
2.Click Repair your computer at the bottom.
3.Now choose Troubleshoot and then Advanced Options.
4..Finally, click on “System Restore” and follow onscreen instructions to complete the restore.
5.Restart your PC and this step may have Fix Error 1962 No Operating System Found.
Method 6: Repair Install Windows 10
If none of the above solution work for you then you can be sure that your HDD is fine but you may be seeing the error “Error 1962 No Operating System Found” because the operating system or the BCD information on the HDD was somehow erased. Well, in this case, you can try to Repair install Windows but if this also fails then the only solution left is to Install a new copy of Windows (Clean Install).
Recommended for you:
That’s it you have successfully Fix Error 1962: No Operating System Found but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.