修复错误加载播放器:未找到可播放的来源 -(Fix Error loading player: No playable sources found –) 最令人沮丧的情况之一是当您尝试播放在线视频时,您的屏幕上出现错误。大多数用户遇到的最常见错误之一是加载播放器时出错:找不到可播放的资源。(Error loading player: No playable sources found.)当您尝试在浏览器上播放在线视频时,会发生此错误。当您的浏览器缺少 flash 文件或无法加载 flash 或运行 flash 时,您会遇到此问题。但是,这个问题不会阻止您观看您最喜爱的在线视频(online videos)。在本文中,我们将解释一些久经考验的方法来解决此错误。
加载播放器时出错:找不到可播放的资源 [已解决](Error loading player: No playable sources found [SOLVED])
确保(Make)创建一个还原点(restore point) 以防万一(case something)出现问题。
方法 1- 重新安装 Adobe Flash Player(Method 1- Reinstall Adobe Flash Player)
我们知道这个错误的主要原因是缺少Adobe Flash Player,因此,最好重新安装Adobe Flash Player。
1.首先卸载您当前的Adobe Flash 播放器(Adobe Flash player)。为此,您可以从 Adobe 安装官方 Adobe Uninstaller(official Adobe Uninstaller)。
2.运行卸载程序并按照屏幕上的说明进行操作。
3.卸载完成后,您需要点击此处立即安装(Install Now),为您的设备 下载全新的Adobe Flash Player。
4.Adobe flash(Adobe flash) player安装成功后,需要重启设备。
现在检查问题是否已解决。如果您仍然无法观看自己喜欢的视频,则需要进一步使用其他方法。
方法 2 – 更新您的网络浏览器(Method 2 – Update Your Web Browser)
在过时的浏览器上浏览也可能导致显示此错误。因此(Therefore),另一种解决方法是更新您的网络浏览器(web browser)。这里我们将解释更新Chrome 浏览器(Chrome browser)的步骤。
1.打开您的 Chrome 浏览器。
2.现在点击菜单,右边三个点。
3.导航到帮助(Help),在这里你会看到关于谷歌浏览器(About Google Chrome)选项,点击它。
4.Chrome 将开始检查浏览器的最新更新。如果有更新,它将开始下载并安装更新。
如果Error loading player: No playable sources found 已解决(Error loading player: No playable sources found is solved),那很好,否则您需要选择其他解决方法。
方法 3 – 清除浏览器缓存(Method 3 – Clear Browser Cache)
The Error loading player的可能原因之一:没有可播放的来源(The Error loading player: No playable sources)可能是您的浏览器缓存(browser cache)。因此,您需要清除所有浏览器缓存(browser cache)才能解决此错误。以下是清除Chrome 浏览器(Chrome browser)缓存的步骤。
1.打开谷歌Chrome浏览器。
2.单击浏览器最右侧的三个点,(three dots)菜单(Menu)。
3.将鼠标悬停在更多工具(More Tools)部分,这将打开一个菜单,您需要在其中单击清除浏览数据。(Clear Browsing Data.)
注意:或者您可以直接按 Ctrl+H打开历史记录。
4.现在设置时间和日期(time and date),您希望浏览器从哪个日期开始删除缓存文件。
5.确保您启用了所有复选框。
6.单击清除数据(Clear Data)执行从浏览器清除缓存文件的过程。
方法 4 – 在浏览器上启用 Flash(Method 4 – Enable Flash on your browser)
要在 Chrome以外的浏览器上启用Flash ,请使用(Chrome use)本指南。
1.打开Chrome浏览器。
2.在浏览器地址栏中(browser address bar)输入以下路径。
chrome://settings/content/flash.
3.这里您需要确保启用了允许站点运行闪存。(Allow Sites to run flash is enabled.)
4.重启浏览器。
现在检查您是否能够在浏览器上流式传输在线视频。
方法 5 – 添加 Flash 例外(Method 5 – Add Flash Exceptions)
1.在您的 PC 上打开谷歌浏览器。
2.单击最右侧的三点(three-dot)菜单,然后选择设置。( Settings.)
3.向下滚动然后单击高级。( Advanced.)
4.现在在“隐私和安全(Privacy and security)”部分点击站点设置或内容设置。(Site settings or Content settings.)
5.从下一个屏幕点击Flash。
6.在允许列表下添加您想要运行 Flash 的任何网站。
方法 6 – 确保 Windows 操作系统已更新(Method 6 – Make sure the Windows operating system is updated )
有时,如果Windows更新文件处于待处理状态,您在使用系统时可能会遇到一些困难。因此,建议检查是否有任何更新待处理。如果更新待处理,请确保立即安装它们并重新启动系统。
1.按Windows + I 打开系统设置或直接键入Windows Update Setting导航到更新部分。
2.您可以在此处刷新Windows 更新文件(Windows Update Files)检查选项,让Windows 扫描(Windows scan)您设备的任何可用更新。
3.下载并安装任何待处理的更新。
方法 7 – 执行干净启动(Method 7 – Perform Clean Boot)
1.按Windows Key + R按钮,然后键入msconfig 并单击确定。
2.在常规选项卡(General tab)下,确保 选中 选择性启动。( Selective startup)
3.取消勾选选择性启动下加载启动项(Load startup items) 。
4.切换到服务选项卡(Service tab)并选中 隐藏所有 Microsoft 服务。(Hide all Microsoft services.)
5.现在单击 禁用所有( Disable all )按钮以禁用所有可能导致冲突的不必要服务。
6.在启动选项卡上,单击打开任务管理器。(Open Task Manager.)
7.现在在启动选项卡( Startup tab)(在任务管理器内)禁用所有( disable all )启用的启动项。
8.单击确定,然后重新启动。(Restart. )现在看看你是否能够修复 错误(Error)加载播放器没有找到可播放的来源。
9.如果您能够在干净启动(Clean boot)中修复上述错误,那么您需要找到错误的根本原因(root cause)以找到永久解决方案。为此,您需要使用本指南中将讨论的不同方法执行此操作。
10.按照上述指南操作后,您需要确保您的 PC 以正常模式(Normal mode)启动。
11.为此,请按Windows key + R按钮并键入msconfig 并按 Enter。
12.在常规选项卡上,选择正常启动选项( Normal Startup option),然后单击确定。
13.当提示您重新启动计算机时,单击重新启动。 ( click Restart. )
推荐的:(Recommended:)
- 将您的智能手机(Smartphone)变成万能遥控器(Universal Remote Control)
- 修复移动热点在(Fix Mobile hotspot)Windows 10中不起作用
- 如何使用Windows 10 新剪贴板(New Clipboard)?
- Windows 10 提示:禁用 SuperFetch
以上方法均有效且经过测试。根据用户的系统配置和错误根本原因(system configuration and error root cause),上述任何一种方法都将帮助您修复 Error loading player: No playable sources found(fix Error loading player: No playable sources found)。如果您在尝试所有方法后仍然遇到此错误,请在框中给我留言,我会提出其他一些解决方案。有时根据具体的错误,我们也需要探索其他解决方案。
Error loading player: No playable sources found [SOLVED]
Fix Error loading player: No playable sources found – One of the most frustrating situations is when you try to play an online video, and you get an error on your screen. One of the most common errors that most of the users encounter is Error loading player: No playable sources found. This error happens while you are trying to play an online video on your browser. When your browser is missing flash files or fail to load flash or run flash, you will encounter this problem. However, this problem is not going to stop you from watching your favorite online videos. In this article, we will explain some tried and tested methods to solve this error.
Error loading player: No playable sources found [SOLVED]
Make sure to create a restore point just in case something goes wrong.
Method 1- Reinstall Adobe Flash Player
As we know that the major cause of this error is missing Adobe flash player, therefore, it would be better to reinstall Adobe Flash Player.
1.Start with uninstalling your current Adobe Flash player. To do this you can install the official Adobe Uninstaller from Adobe.
2.Run the uninstaller and follow the onscreen instructions.
3.Once the uninstallation is finished, you need to click here to Install Now to download fresh Adobe Flash Player for your device.
4.Once the Adobe flash player is installed successfully, you need to restart your device.
Now check if the problem is solved or not. If still you are not able to watch your favorite video, you need to move further to other methods.
Method 2 – Update Your Web Browser
Browsing on the outdated browser may also lead to show this error. Therefore, another workaround would be updating your web browser. Here we are explaining the steps of updating the Chrome browser.
1.Open your Chrome browser.
2.Now click on the menu, three dots on the right side.
3.Navigate to Help, here you will see About Google Chrome option, Click on it.
4.Chrome will start checking the latest updates for the browser. If there are updates, it will start to download and install the updates.
If Error loading player: No playable sources found is solved, that is good otherwise you need to opt for another workaround.
Method 3 – Clear Browser Cache
One of the probable reasons of The Error loading player: No playable sources could be your browser cache. Therefore, you need to clear all browser cache to solve this error. Below are the steps for clearing the Chrome browser cache.
1.Open Google Chrome browser.
2.Click on the three dots on the extreme right side of the browser, Menu.
3.Hover on More Tools section which will open a menu where you need to Click on Clear Browsing Data.
Note: Or you can directly press Ctrl+H to open History.
4.Now set the time and date, from which date you want the browser to delete cache files.
5.Make sure you enabled all checkboxes.
6.Click on Clear Data to execute the process of clearing the cache files from the browser.
Method 4 – Enable Flash on your browser
To enable Flash on browsers other than Chrome use this guide.
1.Open Chrome Browser.
2.Enter the following path in your browser address bar.
chrome://settings/content/flash.
3.Here you need to make sure that Allow Sites to run flash is enabled.
4.Restart your browser.
Now check if you are able to stream online videos on your browser.
Method 5 – Add Flash Exceptions
1.Open Google Chrome on your PC.
2.Click on the three-dot menu from the extreme right then choose Settings.
3.Scroll down then click on Advanced.
4.Now under “Privacy and security” section click on Site settings or Content settings.
5.From the next screen click on Flash.
6.Add any website you want to run flash for under the allow list.
Method 6 – Make sure the Windows operating system is updated
Sometimes if Windows update files are pending, you may be encountering some difficulties while using your system. Therefore, it is advisable to check whether any updates are pending. If updates are pending, make sure you install them immediately and restart your system.
1.Press Windows + I to open system settings or directly type Windows Update Setting to navigate to the Update section.
2.Here you can refresh the Windows Update Files check option to let the Windows scan for any available updates for your device.
3.Download and install any pending updates.
Method 7 – Perform Clean Boot
1.Press the Windows Key + R button, then type msconfig and click OK.
2.Under the General tab under, make sure Selective startup is checked.
3.Uncheck Load startup items under selective startup.
4.Switch to the Service tab and checkmark Hide all Microsoft services.
5.Now click Disable all button to disable all the unnecessary services which might cause conflict.
6.On the Startup tab, click Open Task Manager.
7.Now in the Startup tab (Inside Task Manager) disable all the startup items which are enabled.
8.Click OK and then Restart. Now see if you’re able to fix Error loading player No playable sources found.
9.If you’re able to fix the above error in Clean boot then you need to find the root cause of the error to find a permanent solution. And to do this you will need to perform using a different approach which will discuss in this guide.
10.Once you have followed the above guide you will need to make sure your PC starts in Normal mode.
11.To do this press the Windows key + R button and type msconfig and hit Enter.
12.On the General tab, select the Normal Startup option, and then click OK.
13.When you are prompted to restart the computer, click Restart.
Recommended:
Above methods are valid and tested. Depending on the users’ system configuration and error root cause, any one of the above methods will help you fix Error loading player: No playable sources found. If you still experience this error after trying all methods, drop me a comment in the box, I will come out with some other solutions. Sometimes depending on the specific errors, we need to explore other solutions as well.