AirPods 可在Apple和非Apple设备上使用。您可以像普通蓝牙(Bluetooth)耳机一样在 Windows 设备上连接和使用 AirPods 。(connect and use AirPods on Windows devices)本教程向您展示如何将AirPods连接到Microsoft Surface Pro和Surface笔记本电脑。

将 AirPods 连接(Connect AirPods)到Microsoft Surface
- 按Windows + I 打开Windows 设置(Windows Settings)应用程序。
- 选择(Select Bluetooth)侧边栏上的“蓝牙和设备”,打开“蓝牙”(Bluetooth),然后选择“添加(Add)设备”。

注意:如果你的Surface运行Windows 10,请转到Settings > “设备” (Devices) > Bluetooth和其他设备”,打开“蓝牙”(Bluetooth),然后选择“添加蓝牙(Add Bluetooth)或其他设备”。

- (Select Bluetooth)在“添加设备”弹出窗口中
选择蓝牙。

下一步是将 AirPods 置于配对模式。将左右耳塞放入充电盒中,并保持盖子打开。
- 按住外壳背面的设置按钮约 5 秒钟。(Setup)当AirPods(AirPods)外壳正面的状态指示灯呈白色闪烁
时,松开“设置”按钮。(Setup)

注意:如果您有AirPods Max,请按住噪音控制(Noise Control)按钮约 5 秒钟,将其置于配对模式。

- 等待5-10 秒,您的 AirPods 就会出现在可用(Wait)蓝牙(Bluetooth)设备列表中。选择您的 AirPods 将其连接到Surface Pro或笔记本电脑。

- (Select Done)当您看到“您的设备已准备就绪!”时,选择“完成” 成功消息。

如果电池电量不足,您的 AirPods 可能无法连接或进入配对模式。为 AirPods 充电几分钟,然后尝试再次将它们与Surface配对。
让 AirPods 成为(Make AirPods)Surface(Your)上的有源
输出(Active Output Device)设备
当您将 AirPods 连接到Surface时,Windows会自动将它们设为主要音频设备。如果Windows(Windows)不将音频输出路由到连接的 AirPods,
请更改Surface的声音输出设置。
使用 AirPods(Use AirPods)进行声音输出(Sound Output)(通过快速设置菜单(Quick Settings Menu))
- 选择Surface(Surface)任务栏右下角的扬声器图标(或按Windows + A ) 。
- 选择音量滑块旁边的
声音输出图标。(Sound Output)

- 选择您的 AirPods,使其成为声音输出的活动设备。

使用 AirPods(Use AirPods)进行声音输出(Sound Output)(通过Windows 设置(Windows Settings))
您还可以通过Windows 设置应用将 AirPods 设为(Windows Settings)Surface 的(Surface)活动音频输出设备。
- 打开“设置”(Settings)应用程序,转到System > Sound,然后展开“选择(Choose)播放声音的位置”下拉菜单。

- 选择您的 AirPods,使其成为活动输出设备。

- 接下来,滚动到“输入”部分并展开选择(Choose)用于讲话或录音的设备下拉菜单。

- 选择您的 AirPods 以将其用于Surface设备上的音频输入。

(Disconnect)断开AirPods(Unpair AirPods)与Surface的(Surface)连接或取消配对
您可以通过“快速设置”(Quick Settings)或“蓝牙设置”(Bluetooth Settings)菜单断开 AirPods 与Surface的连接。
要使用“快速设置”(Quick Settings),请按照下列步骤操作:
- 选择任务栏上的扬声器图标或按Windows + A 打开“快速设置”(Quick Settings)菜单。

- 在列表中选择您的 AirPods,然后选择“断开连接”(Disconnect)按钮。

要使用蓝牙设置(Bluetooth Settings)菜单,请按照下列步骤操作:
- 前往Settings > Bluetooth和设备”,选择 AirPods 上的三点菜单图标,然后选择“断开连接”(Disconnect)。

- 选择删除(Select Remove)设备以取消 AirPods 与您设备的配对。

在 Surface 上使用 AirPods
尽管AirPods可在非 Apple 设备上使用,但其特性和功能有限。例如,您无法在Windows中使用(Windows)Conversation Boost,也无法运行耳塞贴合测试。您也无法使用Siri或检查耳机的电池,但有一个非官方的解决方法 - 请参阅如何在 Windows 和 Android 中检查 AirPods 电池(how to check AirPods battery in Windows and Android)。
有趣的是,AirPod的噪音控制功能(主动降噪(Noise Cancellation)和通透(Transparency)模式)可以在Windows中使用。在AirPods Pro型号上,按住一只AirPod柄上的力传感器可在噪音控制模式之间切换。当您听到提示音时松开力传感器。
如果您使用AirPods Max,请按噪音控制按钮在(Noise Control)透明模式(Transparency)和主动降噪(Active Noise Cancellation)模式之间切换。
How to Connect AirPods to Your Microsoft Surface
ΑirPods wоrk оn Apple and non-Aрple devices. You can connect and use AirPods on Windows devices just like regular Bluetooth headphones. This tutorial shows you how to connect AirPods to your Microsoft Surface Pro and Surface laptop.

Connect AirPods to Your Microsoft Surface
- Press Windows + I to open the Windows Settings app.
- Select Bluetooth & devices on the sidebar, toggle on Bluetooth, and then select Add device.

Note: If your Surface runs Windows 10, head to Settings > Devices > Bluetooth & other devices, turn on Bluetooth, and select Add Bluetooth or other device.

- Select Bluetooth on the “Add a device” pop-up.

The next step is to put your AirPods in pairing mode. Put both (left and right) earbuds in the charging case and keep the lid open.
- Press and hold the Setup button on the back of the case for about 5 seconds. Release the Setup button when the status light on the front of the AirPods case flashes white.

Note: If you have the AirPods Max, press and hold the Noise Control button for about 5 seconds to put it in pairing mode.

- Wait 5-10 seconds for your AirPods to appear on the list of available Bluetooth devices. Select your AirPods to connect them to your Surface Pro or laptop.

- Select Done when you see a “Your device is ready to go!” success message.

Your AirPods may not connect or go into pairing mode if the batteries are low. Charge your AirPods for a few minutes and try pairing them to your Surface again.
Make AirPods the Active Output Device on Your Surface
When you connect your AirPods to your Surface, Windows automatically makes them the primary audio device. Change Surface’s sound output settings if Windows doesn’t route audio output to your connected AirPods.
Use AirPods for Sound Output (via Quick Settings Menu)
- Select the speaker icon (or press Windows + A) in the bottom-right corner of your Surface taskbar.
- Select the Sound Output icon next to the volume slider.

- Select your AirPods to make them the active device for sound output.

Use AirPods for Sound Output (via Windows Settings)
You can also make your AirPods the active audio output device for your Surface through the Windows Settings app.
- Open the Settings app, go to System > Sound, and expand the Choose where to play sound drop-down menu.

- Select your AirPods to make them the active output device.

- Next, scroll to the “Input” section and expand the Choose a device for speaking or recording drop-down menu.

- Select your AirPods to use them for audio input on your Surface device.

Disconnect or Unpair AirPods from Surface
You can disconnect your AirPods from your Surface through the Quick Settings or Bluetooth Settings menu.
To use Quick Settings, follow these steps:
- Select the speaker icon on the taskbar or press Windows + A to open the Quick Settings menu.

- Select your AirPods on the list and select the Disconnect button.

To use the Bluetooth Settings menu, follow these steps:
- Go to Settings > Bluetooth & devices, select the three-dot menu icon on your AirPods, and choose Disconnect.

- Select Remove device to unpair the AirPods from your device.

Use AirPods on Your Surface
Although AirPods work on non-Apple devices, their features and functionalities are limited. For example, you can’t use Conversation Boost in Windows, nor can you run an ear tip fit test. You also can’t use Siri or check the headphones’ battery, but there’s an unofficial workaround—see how to check AirPods battery in Windows and Android.
Interestingly, AirPods’ noise-control functions (Active Noise Cancellation and Transparency mode) work in Windows. On AirPods Pro models, press and hold the force sensor on the stem of one AirPod to switch between noise-control modes. Release the force sensor when you hear a chime.
If you use the AirPods Max, press the Noise Control button to switch between Transparency and Active Noise Cancellation modes.