当您购买新的罗技无线鼠标时，它应该提供通过无线接收器或(Logitech)蓝牙(Bluetooth)进行连接的选项。它甚至可能支持这两种方法，让您可以灵活地选择将其与 PC 或Mac配对的最佳方式。
本教程将引导您完成通过无线接收器或蓝牙将(Bluetooth)罗技(Logitech)无线鼠标连接到计算机的步骤。
通过无线接收器将(Wireless Receiver)罗技鼠标(Logitech Mouse)连接到计算机(Computer)
如果您的罗技(Logitech)无线鼠标配有标准USB适配器，只需将其插入PC 或Mac上的(Mac)USB端口，打开鼠标，即可使用。最好避免将接收器连接到外部 USB 集线器(avoid connecting the receiver to external USB hubs)。
如果它与Logitech Unifying接收器捆绑在一起（您可以通过橙色Unifying徽标来识别它），您应该仍然能够即插即用。但是，如果这不起作用，您必须使用Logitech Unifying 软件(Logitech Unifying Software)手动配对鼠标和接收器。同时使用有线鼠标或触控板与计算机交互。
- (Download the Logitech Unifying Software utility)在您的 PC 或Mac上(Mac)下载 Logitech Unifying Software 实用程序。然后，运行安装文件并按照屏幕上的所有说明进行安装。
- 将Logitech Unifying接收器插入计算机上的
USB插槽。(USB)
- 通过“开始”(Start)菜单 (PC) 或启动板(Launchpad)( Mac )
启动Logitech Unifying Software实用程序。(Logitech Unifying Software)
- (Select Next)在Logitech Unifying 软件欢迎屏幕上(Logitech Unifying Software Welcome)选择下一步。
- 找到鼠标侧面或底部的电源开关并将其打开。(Power)如果它已经打开，请将其关闭，然后重新打开。
- 应立即出现“我们已检测到您的鼠标”屏幕。移动鼠标 - 如果光标移动，请选择“是”(Yes)单选按钮选项，然后选择“下一步”(Next)。
(Select No)如果光标不会移动以重复配对过程，请选择“否” 。在执行此操作之前，您可能需要连接到其他USB端口并检查电池盒中是否有电池隔离卡舌（如果发现，请将其取下）。
- 选择完成。
如果您的Logitech无线鼠标显示Unifying符号，但包装中不包含Unifying接收器，您可以(Unifying)单独购买一个(purchase one separately)来使用此功能。
注意：您可以使用Logitech Unifying 软件将最多六个(Logitech Unifying Software)Logitech设备（无线键盘、鼠标和触控板）连接到同一个Unifying接收器。
一些较新的罗技(Logitech)无线鼠标（例如Logitech Lift Ergonomic）配备了(Logitech Lift Ergonomic—come)Logi Bolt(Logi Bolt)接收器（由绿色Bolt图标表示）。与Unifying接收器一样，您可以将其插入并立即使用鼠标，或使用 Logi Bolt 应用程序(use the Logi Bolt App)手动配对。
(Connect Logitech Mouse)通过蓝牙(Bluetooth)将罗技鼠标连接到计算机(Computer)
如果您的罗技无线鼠标通过(Logitech)蓝牙(Bluetooth)工作（查找鼠标或包装上的蓝牙(Bluetooth)徽标），则无需无线接收器即可对其进行设置，只要您的计算机也具有蓝牙功能即可(your computer also has Bluetooth capabilities)。
一些无线鼠标（例如Logitech MX Master）支持蓝牙(Bluetooth)和Unifying/Bolt技术，因此您可以在这两种方法之间进行选择。
注意：如果您的鼠标允许您通过蓝牙(Bluetooth)与多个设备配对，则必须在开始之前选择要分配给设备的通道，例如 1、2 或 3 - 重复按“配对”按钮可在通道(Pair)之间循环。
(Connect Logitech Mouse)通过蓝牙连接罗技鼠标- Windows(Bluetooth – Windows)
- 右键单击(Right-click)“开始”(Start)按钮（或按Windows + X）并选择“设置”(Settings)。
- 选择蓝牙(Select Bluetooth)和设备，然后选择添加(Add)设备。
- 选择蓝牙。
- 按住Logitech 蓝牙(Logitech Bluetooth)鼠标上的“配对”(Pair)按钮。
注意：根据您的鼠标型号，通道LED指示灯可能会快速闪烁，以确认您已进入配对模式。
- 当鼠标出现在“添加设备”窗格中时，选择鼠标。
- 选择完成(Select Done)以确认蓝牙(Bluetooth)配对。
(Connect Logitech Mouse)通过蓝牙连接罗技鼠标-(Bluetooth –) macOS
- 打开MacBook、i Mac或Mac mini上的控制中心(Control Center)并展开蓝牙(Bluetooth)控制。或者，选择菜单栏上的
蓝牙图标。(Bluetooth)
- 选择蓝牙设置。
- 按住蓝牙(Bluetooth)鼠标上的“配对”(Pair)按钮进入配对模式，当鼠标出现在“附近的(Nearby)设备”(Devices)部分
下时，选择“连接”按钮(Connect)
定制您的罗技鼠标
将罗技(Logitech)无线鼠标连接到Microsoft Windows或Mac计算机后，您需要自定义其工作方式。在电脑上，打开“设置”(Settings)应用，然后转到“蓝牙(Bluetooth)和设备”> “鼠标”(Mouse)。
在这里，您可以确定指针速度、鼠标按钮方向、滚动速度等。您还可以选择其他(Additional)鼠标设置来修改鼠标的其他方面(modify other aspects of the mouse)，例如双击速度、指针形状等。
在Mac(Mac)上，打开Apple菜单，选择System Preferences/Settings，然后选择鼠标(Mouse)类别以更改跟踪速度、滚动方向、滚动速度和双击速度。
安装和使用 Logi Options+
Logi Options+是一款Logitech实用程序，可让您进一步自定义Logitech鼠标的按钮、手势和其他设置。安装它后，您的鼠标（包括罗技的其他有线和无线设备）应该会(Logitech—should)自动出现在应用程序中。
根据您的鼠标，您可能会看到各种自定义选项，例如将不同的操作绑定到按钮、微调指针和滚轮、安装固件更新等。使用Logitech(Logitech)帐户登录以在设备之间同步鼠标设置和首选项。
轻松连接您的罗技无线(Ease)鼠标(Logitech Wireless Mouse)
将罗技(Logitech)无线鼠标连接到 PC 或Mac并不复杂。您可以使用包装内的USB接收器轻松设置它或将其与蓝牙(Bluetooth)配对。连接后，不要忘记在操作系统中自定义鼠标设置，并通过下载和安装Logi Options+来增强其功能。
如果您遇到无线或蓝牙(Bluetooth)连接问题，请查看我们的罗技鼠标故障排除指南，(Logitech mouse troubleshooting guide)了解解决问题的方法。
How to Connect a Logitech Wireless Mouse to Your Computer
When you purchase a new Logitech wirеless mouse, it should offer the option to connect via either a wireless receiver or Bluеtooth. It may even sυpport both methods, giving you the flexibility to choose the best way to pair it to your PC or Mac.
This tutorial will walk you through the steps to connect your Logitech wireless mouse to your computer through a wireless receiver or Bluetooth.
Connect a Logitech Mouse to Computer via Wireless Receiver
If your Logitech wireless mouse comes with a standard USB dongle, just plug it into a USB port on your PC or Mac, turn on your mouse, and it should be ready to go. It’s good practice to avoid connecting the receiver to external USB hubs.
If it’s bundled with a Logitech Unifying receiver (you can identify it with the orange Unifying logo), you should still be able to plug and play. However, if that doesn’t work, you must use the Logitech Unifying Software to pair the mouse and receiver manually. Use a wired mouse or trackpad to interact with your computer in the meantime.
- Download the Logitech Unifying Software utility on your PC or Mac. Then, run the setup file and follow all on screen instructions to install it.
- Plug the Logitech Unifying receiver into a USB slot on your computer.
- Launch the Logitech Unifying Software utility via the Start menu (PC) or Launchpad (Mac).
- Select Next on the Logitech Unifying Software Welcome screen.
- Locate the Power switch on the side or bottom of the mouse and turn it on. If it’s already on, switch it off, then back on.
- A “We have detected your mouse” screen should appear momentarily. Move the mouse around—if the cursor moves, pick the Yes radio button option and select Next.
Select No if the cursor won’t move to repeat the pairing process. You might want to connect to a different USB port and check the battery compartment for a battery isolation tab (remove it if you spot one) before you do that.
- Select Finish.
If your Logitech wireless mouse displays a Unifying symbol but does not include a Unifying receiver in its packaging, you can purchase one separately to use this feature.
Note: You can use the Logitech Unifying Software to connect up to six Logitech devices—wireless keyboards, mice, and trackpads—to the same Unifying receiver.
A handful of newer Logitech wireless mice—e.g., the Logitech Lift Ergonomic—come with the Logi Bolt receiver (denoted by a green Bolt icon). Like with the Unifying receiver, you can plug it in and use the mouse immediately or use the Logi Bolt App to pair it manually.
Connect Logitech Mouse to Computer via Bluetooth
If your Logitech wireless mouse works over Bluetooth (look for the Bluetooth logo on the mouse or packaging), you can set it up without needing a wireless receiver, as long as your computer also has Bluetooth capabilities.
Some wireless mice, such as the Logitech MX Master, support Bluetooth and Unifying/Bolt technology, so it’s up to you to pick between the two methods.
Note: If your mouse lets you pair it with multiple devices over Bluetooth, you must choose the channel you want to assign to the device before you begin, such as 1, 2, or 3—press the Pair button repeatedly to cycle between channels.
Connect Logitech Mouse via Bluetooth – Windows
- Right-click the Start button (or press Windows + X) and select Settings.
- Select Bluetooth & devices and choose Add device.
- Select Bluetooth.
- Press and hold the Pair button on your Logitech Bluetooth mouse.
Note: Depending on your mouse model, the channel LED indicator may blink fast to confirm you’ve entered pairing mode.
- Select the mouse when it shows up within the “Add a device” pane.
- Select Done to confirm the Bluetooth pairing.
Connect Logitech Mouse via Bluetooth – macOS
- Open the Control Center on your MacBook, iMac, or Mac mini and expand the Bluetooth control. Or, select the Bluetooth icon on the menu bar.
- Select Bluetooth Settings.
- Press and hold the Pair button on the Bluetooth mouse to enter pairing mode, and select the Connect button when the mouse shows up under the Nearby Devices section
Customize Your Logitech Mouse
After connecting your Logitech wireless mouse to your Microsoft Windows or Mac computer, you’ll want to customize how it works. On the PC, open the Settings app and go to Bluetooth & devices > Mouse.
Here, you can determine the pointer speed, the mouse button orientation, scroll speeds, etc. You can also select Additional mouse settings to modify other aspects of the mouse, such as the double-click speed, pointer shape, and more.
On the Mac, open the Apple menu, select System Preferences/Settings, and select the Mouse category to change the tracking speed, scrolling direction, scrolling speed, and double-click speed.
Install and Use Logi Options+
Logi Options+ is a Logitech utility that allows you to customize your Logitech mouse’s buttons, gestures, and other settings further. Install it, and your mouse—including other wired and wireless devices from Logitech—should automatically appear within the app.
Depending on your mouse, you may see various customization options, such as binding different actions to buttons, fine-tuning the pointer and scroll wheel, installing firmware updates, etc. Sign in with a Logitech account to sync your mouse settings and preferences between devices.
Connect Your Logitech Wireless Mouse with Ease
Connecting a wireless Logitech mouse to your PC or Mac isn’t complicated. You can easily set it up with the USB receiver inside the packaging or pair it with Bluetooth. Once connected, don’t forget to customize the mouse settings in your operating system and enhance its functionality by downloading and installing Logi Options+.
If you encounter wireless or Bluetooth connectivity issues, check our Logitech mouse troubleshooting guide for ways to fix the problem.
