您最多可以将七个（新的或替换的）控制器与任何Amazon Fire TV 流媒体设备(Amazon Fire TV streaming device)配对。本教程将向您展示首次设置时如何将遥控器与Fire TV 配对。(Fire)您还将了解如何在Fire(Fire) TV Remote与流媒体设备失去连接时
重新配对。
配对随附的 Fire TV 遥控器
新款Fire TV 设备(Fire TV devices)附带开箱即用的Alexa Voice Remote 。打开遥控器背面并插入两节AAA电池。这将为您的Alexa Voice Remote(Alexa Voice Remote)启动并自动将其与您的Fire TV 流媒体配对。
配对(Pair)附加或(Additional)替换遥控(Replacement Remote)器
您的Fire TV 设备会自动连接到流媒体设备附带的Alexa Voice Remote 。要配对额外的或替换的遥控器，您必须首先将其置于配对模式，然后通过 fireOS 设置菜单进行连接。
- 选择Fire(Fire) TV 菜单或主屏幕(Home Screen)上的齿轮图标。
- 接下来，选择控制器(Controllers)和蓝牙(Bluetooth) 设备(Devices)。
- 选择亚马逊 Fire TV 遥控器。
- 选择添加新遥控器。
- 按住遥控器上的主页(Home)按钮至少 10 秒钟。
- 当遥控器上的LED指示灯呈橙色闪烁时，松开主页按钮。(Home)这会将遥控器置于配对模式，使其可以被您的Amazon Fire TV 检测到。
根据Fire TV 的型号(model of your Fire TV)，当遥控器成功配对时，遥控器可能会闪烁蓝光。
配对 Amazon Fire TV 远程应用程序
Amazon Fire TV 应用程序可让您像(Amazon Fire TV app)Fire TV遥控器(Remote)一样使用手机。通过移动应用程序，您无需物理遥控器即可控制或导航您的Fire TV 设备。(Fire)如果您无法将Fire TV Remote与流媒体设备配对，请使用该应用程序。
从App Store(App Store)（适用于 iPhone）或Google Play Store（适用于Android ）安装 Fire TV 应用程序，然后按照以下步骤操作。
- 将您的Android或 iOS 设备连接到与(Android)Fire TV 设备相同的网络。
- 启动Amazon Fire TV 应用程序并在“(Amazon Fire)连接(Connect)到远程”部分中选择您的设备。
您的电视上应出现
“ Fire TV远程应用程序连接请求”屏幕。(Remote App Connection Request)
- 在请求屏幕上输入 4 位代码，然后点击复选标记(Checkmark)图标。
如果代码通过检查，Fire TV 应用程序会显示屏幕导航以及物理Fire TV 遥控器上可用的其他控件。
如果应用程序没有自动检测到您的Fire TV 设备，请重新启动路由器并重新启动配对过程。如果问题仍然存在，请重新启动您的Fire TV 和智能手机。(Fire)将两个设备连接(Connect)到同一Wi-Fi网络，然后重试。
取消 Fire TV 遥控器配对
如果您的设备连接了
七个Fire TV 遥控器，您必须移除其中一个才能配对新遥控器。(Fire)
- 打开Fire TV 设置菜单，前往控制器(Controllers)和蓝牙(Bluetooth) 设备(Devices) > Amazon Fire TV遥控器(Remotes)，然后选择您要取消配对的遥控器。
- 按(Press)菜单按钮将其与(Menu)Fire TV 设备取消配对。
注意：您无法删除或取消配对正在使用的
Fire TV遥控器。(Remote)
修复远程配对问题
(Power cycle your Fire TV device)如果首次设置时遥控器未自动连接，请重新启动 Fire TV 设备。拔下Fire TV 的电源插头，等待几秒钟，然后重新插入。重新插入遥控器的电池也可以解决配对或连接问题。使用包装盒中附带的AAA电池，并确保根据电池盒中的铭文对齐电池极性 - 负极 (-) 和正极 (+)。
如果电池电量不足，您的遥控器可能无法与Fire TV配对。如果LED指示灯缓慢闪烁红灯，请更换Fire TV遥控器电池。(Remote)如果您的 Fire TV Remote(Reset your Fire TV Remote )仍无法与流媒体设备配对，请重置它。
How to Pair Your Fire TV Remote
You can pair up to seven (new or replacement) controllers to any Amazon Fire TV streaming device. This tutorial will show you how to pair a remote to your Fire TV when setting it up for the first time. You’ll also learn how to re-pair your Fire TV Remote if it loses connection with the streaming device.
Pair Included Fire TV Remote
New Fire TV devices ship with an Alexa Voice Remote out-of-the-box. Open the back of the remote and insert two AAA batteries. That’ll power up your Alexa Voice Remote and automatically pair it with your Fire TV streaming.
Pair an Additional or Replacement Remote
Your Fire TV device automatically connects to the Alexa Voice Remote that ships with the streaming device. To pair an extra or replacement remote, you must first put it in pairing mode and then connect it through the fireOS settings menu.
- Select the gear icon on your Fire TV menu or Home Screen.
- Next, select Controllers & Bluetooth Devices.
- Select Amazon Fire TV Remotes.
- Select Add New Remote.
- Press and hold the Home button on the remote for at least 10 seconds.
- Release the Home button when the LED indicator on the remote blinks an orange light. That puts the remote control in pairing mode, making it detectable by your Amazon Fire TV.
Depending on the model of your Fire TV, the remote might blink a blue light when the remote pairs successfully.
Pair Amazon Fire TV Remote App
The Amazon Fire TV app lets you use your mobile phone like a Fire TV Remote. With the mobile app, you can control or navigate your Fire TV device without a physical remote control. Use the app if you can’t pair your Fire TV Remote to the streaming device.
Install the Fire TV app from the App Store (for iPhone) or Google Play Store (for Android) and follow the steps below.
- Connect your Android or iOS device to the same network as your Fire TV device.
- Launch the Amazon Fire TV app and select your device in the “Connect To Remote” section.
A “Fire TV Remote App Connection Request” screen should appear on your TV.
- Enter the 4-digit code on the request screen and tap the Checkmark icon.
If the code checks out, the Fire TV app displays on-screen navigation and other controls available on physical Fire TV remotes.
If the app doesn’t automatically detect your Fire TV device, reboot your router and restart the pairing process. Reboot your Fire TV and smartphone if the issue persists. Connect both devices to the same Wi-Fi network and try again.
Unpair Fire TV Remote
If seven Fire TV Remotes are linked to your device, you must remove one to pair a new remote.
- Open your Fire TV settings menu, head to Controllers & Bluetooth Devices > Amazon Fire TV Remotes, and select the remote you want to unpair.
- Press the Menu button to unpair it from your Fire TV device.
Note: You cannot remove or unpair a Fire TV Remote that’s in use.
Fix Remote Pairing Issues
Power cycle your Fire TV device if the remote doesn’t automatically connect when you set it up for the first time. Unplug the Fire TV from its power source, wait a few seconds, and plug it back in. Reinserting the remote’s batteries can also resolve pairing or connection issues. Use the AAA batteries included in the box and ensure you align the battery polarities—negative (-) and positive (+) end—according to the inscriptions in the battery compartment.
Your remote may fail to pair to your Fire TV if its batteries are low. Replace your Fire TV Remote batteries if the LED indicator slowly blinks a red light. Reset your Fire TV Remote if it still won’t pair to the streaming device.
