Windows 10 有一个名为“相机”(Camera)的应用程序,可让您使用网络摄像头录制视频和拍照。这绝对比下载间谍软件/恶意软件猖獗的第三方网络摄像头录制软件要好。在本文中,我将引导您完成使用该应用程序和调整各种设置的过程。
Windows 10应用程序中新的流畅界面的问题之一是有时它过于简单和干净。从字面上看,他们已经删除了您原本期望的按钮和其他视觉元素。例如,除了图片和视频按钮之外,实际上还有其他三个按钮(picture and video buttons)。
请注意,如果您想在图片上添加滤镜、编辑、裁剪或绘图,您应该使用Windows 10中随附的照片应用程序。(Photos)
使用 Windows 10 相机应用程序
在我们开始之前,让我们先了解一下基础知识。首先,打开应用程序,如果您还没有内置或连接到 PC 的网络摄像头,您将看到一个简单的黑屏,显示我们找不到您的摄像头(We can’t find your camera)。
连接相机后,它会询问您是否允许使用相机应用程序(Camera app)中的网络摄像头。
完成此操作后,您应该能够在全屏窗口(screen window)中看到您的网络摄像头,顶部和侧面有几个按钮:
请注意,如果您的网络摄像头无法与Windows 10 相机应用程序(camera app)一起使用,则可能意味着Windows 10无法识别网络摄像头。这可能是由于驱动程序与Windows 10不兼容。您必须访问制造商的网站,查看他们是否有适用于Windows 10的驱动程序版本。如果没有,你只需要等到一个被释放。
现在这是有趣的部分(fun part)!如何使用Widows 10中的相机应用程序拍摄(Camera app)照片或视频(picture or video)?只需单击或点击(Just click or tap)相机图标(camera icon)即可拍照,然后单击(picture and click)或点击摄像机图标(video camera icon)即可开始播放视频。默认情况下,它将拍摄照片或视频(picture or video),然后将其存储在图片文件夹中的(Pictures)相机胶卷(Camera Roll )文件夹中。当你点击时,它会发出抓图的声音,然后图像会滑出屏幕到右下角的图标。
请注意,在平板设备(tablet device)上,您将拥有第三个图标,可让您拍摄全景照片。此外,您可能需要从屏幕底部向上滑动才能调出应用栏(app bar),这将让您更改相机(如果有多个)、设置时间、更改曝光等。
要拍摄视频,您必须单击视频模式(Video mode)按钮,使其变为白色,然后再次单击该按钮。
计时器将从屏幕底部开始,您只需再次单击按钮即可停止录制。
如果单击右上角的小齿轮图标,则可以调整设置。第一个选项是当您按住相机按钮(camera button)时会发生什么。默认情况下,它只拍摄一张照片。您可以将其更改为Photo Burst或Video。
接下来,根据您的相机,您可以选择应捕获的分辨率。接下来,您可以在相机上添加取景网格作为叠加层。选择是三分法(Rule of thirds)、黄金比例( Golden ratio)、十字准线(Crosshairs )和正方形( Square)。如果您在Surface Pro等(Surface Pro)平板设备(tablet device)上使用相机应用程序(camera app),这将非常有用。
接下来,如果您在相机应用程序(camera app)中设置计时器,我将在下面解释,您可以让相机应用程序(camera app)自动拍摄时间流逝(time lapse)。因此,如果您将定时器设置为每 5 秒一次,它将继续拍照,直到您再次按下相机按钮(camera button)。
对于视频,您可以选择录制质量(recording quality),这将再次取决于连接到计算机或设备中的相机。要减少录制视频时的闪烁,请选择列出的最高刷新率。此外,如果您有平板电脑,请确保在拍摄视频时打开数字视频稳定功能(Digital video stabilization)。
最后,下面有一些链接,您可以在其中更改保存照片和视频的(photos and videos)默认位置(default location),并选择相机是否可以使用位置信息(location info)。
返回主屏幕,单击小时钟以调整计时器。这只会在您处于图片模式(picture mode)时显示。您可以选择的时间间隔是定时器关闭、2 秒、5 秒和 10 秒。
单击(Click)箭头以展开列表,您将看到另一个图标,可让您调整亮度。出现一个半圆,您只需单击并沿着圆拖动即可进行调整。
拍摄照片或视频(photo or video)后,单击右下角的小图标将打开照片应用程序(Photos app)以供查看。此外,图片和视频都存储在“图片”下的“(Pictures)相机胶卷”(Camera Roll)文件夹中。
这就是相机应用程序(Camera app)的全部内容。请记住(Remember),要编辑您的照片或视频,您必须使用照片应用程序(Photos app)。享受!
How to Use the Windows 10 Camera App
Wіndоws 10 has аn app called Camera that lets you use your webcam to record videos and take photos. It’s definitely better than having to download spyware/malware-ridden third-party webcam recording software. In this article, I’ll walk you through the process of using the app and adjusting the various settings.
One of the problems with the new slick interface in Windows 10 apps is that sometimes it’s too simplistic and clean. Literally, they have removed buttons and other visual elements that you otherwise expect. For example, there are literally three other buttons in addition to the picture and video buttons.
Note that if you want to add filters, edit, crop or draw on your picture, you should use the accompanying Photos app in Windows 10.
Using Windows 10 Camera App
Before we get to that, lets go through the basics. Firstly, open the app and if you don’t already have a webcam built-in or connected to the PC, you’ll see a simple black screen that says We can’t find your camera.
Once you do connect the camera, it will ask you for permission to use the webcam inside the Camera app.
Once you do this, you should be able to see your webcam in a full screen window with a couple of buttons on the top and side:
Note that if your webcam is not working with the Windows 10 camera app, it probably means Windows 10 does not recognize the webcam. This is probably due to the driver not being compatible with Windows 10. You’ll have to go to the manufacturer’s website and see if they have a version of the driver for Windows 10. If not, you’ll just have to wait until one is released.
Now here’s the fun part! How do you take a picture or video using the Camera app in Widows 10? Just click or tap on the camera icon to take a picture and click or tap on the video camera icon to start a video. By default, it will take a picture or video and then store it in the Camera Roll folder in the Pictures folder. When you click, it will make a picture snapping sound and then the image will slide off the screen to the bottom right icon.
Note that on a tablet device, you’ll have a third icon, which will allow you to take a panoramic photo. Also, you might have to swipe up from the bottom of the screen to bring up the app bar, which will let you change the camera (if there is more than one), set the time, change the exposure, etc.
To take a video, you have to click on the Video mode button so that it turns white and then click on the button again.
The timer will start at the bottom of the screen and all you have to do is click again on the button to stop the recording.
If you click on the small gear icon at the top right, you can adjust the settings. The first option is what happens when you press and hold the camera button. By default, it just takes a single photo. You can change it to Photo Burst or Video.
Next, based on your camera, you can pick the resolution that should be captured. Next, you can add a framing grid as an overlay on the camera. The choices are Rule of thirds, Golden ratio, Crosshairs and Square. This is useful if you are using the camera app on the tablet device like the Surface Pro.
Next, if you set the timer in the camera app, which I explain below, you can have the camera app automatically take a time lapse. So if you set the timer to every 5 seconds, it will keep taking pictures until you press the camera button again.
For videos, you can choose the recording quality, which will again depend on the camera connected to your computer or built into your device. To reduce flicker while recording videos, choose the highest refresh rate listed. Also, if you have a tablet, make sure to turn on Digital video stabilization when taking videos.
Lastly, there are some links below where you can change the default location where photos and videos are saved and choose whether the camera can use location info or not.
Back on the main screen, click on the small clock to adjust the timer. This will only show up when you are in picture mode. The intervals that you can choose are timer off, 2 seconds, 5 seconds and 10 seconds.
Click on the arrow to expand the list and you’ll see one more icon that lets you adjust the brightness. A half-circle appears and you can simply click and drag along the circle to make the adjustments.
Once you take a photo or video, clicking on the small icon at the bottom right will bring up the Photos app for viewing. Also, both pictures and videos are stored in the Camera Roll folder under Pictures.
That’s pretty much all there is to the Camera app. Remember, to edit your photos or videos, you have to go to the Photos app. Enjoy!