谈到Nintendo Switch时,有很多不同的控制器选项可供选择。您可以使用Joy Cons,它附在Switch控制台的侧面,并且是随包装盒一起提供的。
还有Pro控制器,其形状更像传统控制器。这些可以让游戏更流畅。但是,所有这些控制器都有不同的充电方法。
如果您想要长时间玩游戏,但不确定为您选择的Nintendo Switch控制器充电的最佳方式,以下是每种可用控制器的步骤以及如何保持充电。
充电 Nintendo Switch Joy 缺点(Charging Nintendo Switch Joy Cons)
Nintendo Switch随附的Joy Cons可以通过多种不同方式进行充电。根据您所在的位置以及您玩 Switch 的方式,其中一种方法可能更适合您。以下是为Joy Cons充电的选项。
连接到交换机(Attach to the Switch)
为Joy Con(Joy Con)控制器充电的最简单方法是将它们连接到Switch的侧面。此选项最适合您当前不玩游戏(playing)或在手持模式下玩游戏。
- (Attach)通过从顶部将Joy Cons 滑到(Joy Cons)Switch的侧面来安装 Joy Cons。确保(Make)左侧控件位于左侧,反之亦然。
- 将Switch插入扩展坞以允许控制器充电。确保您的Switch已插入电源,以便充电。还要确保开关(Switch)没有关闭,否则它不会充电。但是,它们将在睡眠(Sleep)模式下 充电。
- 如果您在手持模式下玩游戏,控制器仍然会通过连接到Switch而不对接它进行充电,但当它们充电一半时会停止充电以节省Switch的电池。
使用充电手柄 (Use a Charging Grip )
任天堂还为Joy Con控制器销售单独的充电手柄。(charging grip)当您想在电视上播放但需要为Switch控制器充电时,此选项非常适合。(Switch)这种手柄与Switch(Switch)随附的手柄不同,因为它无法为您的Joy Con充电。
- (Attach)打开顶部的滑块,将Joy Cons(Joy) 连接到充电手柄。(Cons)
- 使用手柄随附的USB电缆通过USB端口将其连接到Switch 。握把现在应该正在为您的 Joy Cons充电。
使用充电座(Use a Charging Dock)
另一个可用于为Joy Cons充电的配件是使用任天堂(Nintendo)单独出售的充电底座(charging dock)。如果您有两个以上的 Switch 控制器要同时充电,充电座非常棒,因为它最多可以充电四个。
- 将(Attach)随附的USB电缆从充电座连接到Switch上的端口。
- 将Joy Cons滑入充电座上的插槽。
- 顶部的灯应该是红色的,当控制器充满电时,它们会变成绿色。
为 Nintendo Switch Pro 控制器充电(Charging Nintendo Switch Pro Controllers)
如果您购买了为Switch制造的(Switch)Pro控制器之一,您会发现还有多种方法可以让它们保持充电。如果您经常使用电视模式,这也是一个更好的选择,因为这些控制器的电池寿命更长。
由于那里有许多第三方控制器,因此可能有许多不同的方法可以为您的 Switch 控制器充电,具体取决于您拥有的控制器。但对于Nintendo授权的Pro控制器,您可以按照以下说明进行操作。
使用 USB 线(Use a USB Cord)
您的Pro控制器应随附一根USB 线(USB cord),您可以将其插入Switch使用。
- 将USB(USB)线连接到Switch,另一端连接到控制器。
- 控制器上应该会出现橙色灯,这意味着它正在充电。一旦充电,它就会关闭。
- 如果您在电视模式下播放,则可以在充电时使用控制器。此外,如果您想在控制器充电时以手持模式玩游戏,则Switch不需要放在底座中即可充电。
使用充电座(Use a Charging Dock)
有一些第三方充电座专门用于为Pro Switch控制器充电。您可以找到许多具有多种功能的不同版本,但这款PowerA官方授权的(PowerA)充电座(charging dock)既可为Pro控制器(Pro)充电,也可为Joy Con控制器充电。
- 将(Attach)您的Pro控制器和/或Joy Cons连接到充电座。
- 使用随附的USB电缆,将其插入Switch控制台为控制器充电。确保您的Switch已插入并打开或处于睡眠模式。
- 控制器充电时,充电座顶部的灯会变成红色,充满电后会变成绿色。
控制器电池寿命(Controller Battery Life)
有了Switch为控制器提供的所有选项,您可能想知道最好还是坚持使用随附的Joy Cons或购买Pro控制器。这完全取决于您最喜欢如何玩Switch控制台。
Pro控制器的电池寿命最长,可使用至少 40 小时。Joy Con的电池寿命大约是它的一半。如果您是狂热的Switch玩家,出于这个原因,可能值得购买Pro控制器。(Pro)
Pro控制器充满电大约需要6个小时,而Joy Cons大约需要3.5个小时。如果您很少玩Switch,或者更喜欢在手持模式下玩,那么坚持使用原始的Joy Cons是您最好的选择。
无论哪种方式,为Switch(Switch)控制器充电有很多选择,您可能不必担心游戏会被坏掉的控制器打断。
How to Charge Nintendo Switch Controllers
When it comes to the Nintendo Switch, there are a lot of different controller options to choose from. You can use the Joy Cons, which attach to the sides of the Switch console and are what comes with it in the box.
There are also Pro controllers, which are shaped more like traditional controllers. These can allow for smoother gameplay. All of these controllers, though, have different methods for you to charge them.
If you want to have long gaming sessions but are unsure about the best way to charge your chosen Nintendo Switch controller, below are the steps for each different type of controller available and how to keep them charged.
Charging Nintendo Switch Joy Cons
The Joy Cons which comes with the Nintendo Switch can be charged in multiple different ways. Depending where you are and how you’re playing your Switch, one of these methods may work better for you. Here are your options for charging the Joy Cons.
Attach to the Switch
The easiest way to recharge your Joy Con controllers is to attach them to the sides of your Switch. This option is best for when you’re not currently playing, or you’re playing in handheld mode.
- Attach the Joy Cons by sliding them onto the sides of the Switch from the top. Make sure the left-hand control is on the left side and vice-versa.
- Plug your Switch into the dock to allow the controllers to charge. Be sure your Switch is plugged in so it will be charging. Also be sure the Switch is not turned off, or it won’t charge. However, they will charge in Sleep mode.
- If you’re playing in handheld mode, the controllers will still charge from being attached to the Switch without docking it, but will stop charging them when they’re half charged to save the Switch’s battery.
Use a Charging Grip
Nintendo also sells a separate charging grip for Joy Con controllers. This option is perfect for when you want to play on your television but your Switch controllers need to be charged. This grip is different from the one that comes with the Switch, as that one can’t charge your Joy Cons.
- Attach your Joy Cons to the charging grip by opening the slider on the top.
- Use the USB cable included with the grip to connect it to the Switch via the USB port. The grip should now be charging your Joy Cons.
Use a Charging Dock
Another accessory available for charging Joy Cons is using the charging dock, sold separately by Nintendo. The charging docks are great if you have more than two Switch controllers to charge at once, as it can charge up to four.
- Attach the included USB cable from the charging dock to the port on the Switch.
- Slide your Joy Cons into the slots on the charging dock.
- The lights on the top should be red, and when the controllers are fully charged they will turn green.
Charging Nintendo Switch Pro Controllers
If you have purchased one of the Pro controllers made for the Switch, you’ll find there are also multiple ways to keep them charged. It’s also a better option if you use TV mode a lot, as these controllers have a much longer battery life.
Since there are many third-party controllers out there, there may be many different methods of charging your Switch controllers depending on what controller you have. But for the Nintendo licensed Pro controllers, you can follow the instructions below.
Use a USB Cord
Your Pro controller should come with a USB cord that you can use with it plugged into the Switch.
- Connect the USB cord to your Switch, and the other end into your controller.
- An orange light should come up on the controller, meaning it’s charging. Once charged, it’ll turn off.
- You can use the controller while it’s charging if you’re playing in TV mode. Also, the Switch doesn’t need to be in the dock for it to charge if you want to play in handheld mode while the controller charges.
Use a Charging Dock
There are some third-party charging docks out there made specifically for charging the Pro Switch controller. You can find a lot of different versions with multiple features, but this officially licensed charging dock from PowerA charges both a Pro controller as well as Joy Con controllers.
- Attach your Pro controller and/or your Joy Cons into the charging dock.
- Using the included USB cable, plug it into the Switch console to charge the controllers. Be sure your Switch is plugged in and on or in sleep mode.
- The lights at the top of the charging dock will turn red while your controllers are charging, and will turn green once fully charged.
Controller Battery Life
With all the options the Switch has for controllers, you might wonder if it’s best to just stick with the included Joy Cons or buy a Pro controller. It all depends on how you best like to play your Switch console.
The Pro controllers have the best battery life, lasting for at least 40 hours of use. Joy Con battery life is about half that. If you’re an avid Switch player, it’s probably worth investing in a Pro controller for this reason, among others.
It also takes around 6 hours to fully charge the Pro controller, while the Joy Cons take about 3.5. If you play your Switch sparsely or are more into playing in handheld mode, just sticking with the original Joy Cons is your best bet.
Either way, there are so many options for charging Switch controllers that you likely won’t have to worry much about your gaming getting interrupted by a dead controller.