如果您的计算机运行正常,Windows 安全模式(Windows Safe Mode)可以帮助您解决中断或阻止 Windows 正常启动的问题。这样,您可以自己进行维修,而无需前往电脑维修店。
安全模式(Mode)使用一组有限的文件和驱动程序以基本状态启动Windows ,因此您可以观察(Windows)Windows并缩小问题的根源。
在Windows 10之前,您可以通过在重新启动期间反复按F8 键(F8 key)轻松进入安全模式(Safe Mode)。一些电脑制造商已经禁用了 F8 键功能,但在Windows 7、Vista和 XP中仍然可以使用 F8 方法进入安全模式。(Safe Mode)
以下是如何在所有版本的Windows中启动进入安全(Windows)模式(Mode)。
视窗 10(Windows 10)
在Windows 10中,您可以使用不同的方法访问安全模式(Safe Mode),包括:
- 登录屏幕。
- 从空白或黑屏。
- 使用 Windows 设置。
- 从恢复驱动器。
- 使用系统配置。
- 使用命令提示符中的(Command Prompt)Shutdown命令。
从登录屏幕启动进入安全模式(Boot into Safe Mode from the Sign-in Screen)
如果您在Windows登录屏幕上,则可以通过几个步骤进入Windows安全模式。
- 在选择Power > Restart的同时按住Shift 键(Shift )。
- 重新启动 PC 后,选择“选择一个选项”(Choose an option)屏幕。
- 选择疑难解答(Troubleshoot)。
- 接下来,选择高级选项。(Advanced options.)
- 接下来,选择启动设置(Startup Settings)。
- 选择重新启动(Restart),一旦您的 PC 重新启动,选择4启用安全模式(Enable Safe Mode)或选择5启用(5 )带网络连接(Safe Mode with Networking)的安全模式。
注意(Note):如果您已加密您的计算机,系统可能会要求您在启动进入安全模式之前输入您的(Safe Mode)BitLocker密钥。带网络的(Networking)安全模式(Safe Mode)包括访问网络上的其他计算机和访问 Internet 所需的服务和网络驱动程序。
从黑屏或黑屏启动进入安全模式(Boot into Safe Mode from a Black or Blank Screen)
您可能会看到空白或黑色桌面屏幕(black desktop screen)的原因有多种。例如,您可能遇到过Windows 10 黑屏死机(Windows 10 Black Screen of Death)或屏幕出现问题。
您仍然可以从黑屏或空白屏幕进入Windows 安全模式(Windows Safe Mode),但您需要先进入WinRE(Windows 恢复环境(Windows Recovery Environment))。
- 按住电源(power)按钮 10 秒钟,直到设备关闭。
- 再次按下(Press)电源按钮以重新开启计算机。
- 当您看到屏幕上出现制造商的徽标时,再次按住电源按钮 10 秒钟以关闭计算机,然后重新打开电源。
- Windows重新启动后,按下电源按钮关闭计算机,然后再次按下电源按钮将其打开。
- 让设备完全重启,您将进入WinRE。
- 选择疑难解答(Troubleshoot)>高级选项(Advanced options)>启动设置(Startup Settings)>重新启动(Restart)。
- PC 重新启动后,选择启用安全模式(Enable Safe Mode)(4) 或带网络的安全模式(Safe Mode with Networking)(5)。
从设置启动进入安全模式(Boot into Safe Mode from Settings)
如果您可以登录Windows 10 ,则可以从“设置”(Settings)应用进入安全模式。(Mode)
- 选择开始(Start)>设置(Settings)>更新和安全(Update & Security)。
- 接下来,选择“恢复(Recovery)” > “高级启动(Advanced startup)” > “立即重新启动(Restart now)” 。
- 在选择一个选项( Choose an option )菜单上选择疑难解答(Troubleshoot)>高级选项(Advanced options)>启动设置(Startup Settings)>重新启动(Restart ),然后选择启用安全模式(Enable Safe Mode)或带网络连接(Safe Mode with Networking)的安全模式。
从恢复驱动器(From a Recovery Drive)
如果您还没有恢复驱动器,您可以创建一个恢复驱动器并使用它来访问安全模式(Safe Mode)。
- 连接恢复驱动器并打开计算机电源。按Windows 徽标键(Windows logo key)+ L进入登录屏幕,然后按照步骤在WinRE中重新启动计算机。
- 在选择一个选项(Choose an option)菜单中,然后选择疑难解答(Troubleshoot)>高级选项(Advanced options )>启动设置(Startup Settings)>重新启动(Restart)。选择启用安全模式(Enable Safe Mode)(4) 或带网络的安全模式(Safe Mode with Networking)(5)。
注意(Note):如果您没有看到选择(Choose)一个选项菜单,您的计算机可能未设置为从驱动器启动,但您可以更改启动顺序( change the boot order)。
使用系统配置(Using System Configuration)
您还可以使用系统配置(System Configuration)工具进入Windows 安全模式(Windows Safe Mode)。
- 右键单击开始(Start)>运行(Run)。
- 在“运行”对话框中键入msconfig.exe ,然后按(msconfig.exe)Enter。
- 在System Configuration窗口中选择Boot选项卡,在(Boot)Boot options下选择Safe Boot,然后按OK。
- 如果Windows提示您重新启动计算机,请选择重新启动(Restart)以访问安全模式。
在命令提示符中使用关机命令(Using Shutdown Command in Command Prompt)
您可以使用命令提示符(Command Prompt)中的 shutdown.exe 命令进入安全模式(Safe Mode)。
- 在搜索字段中键入CMD并选择(CMD)Command Prompt > Run as administrator。
- 接下来,键入shutdown.exe命令并按Enter。
- Windows 将在WinRE中重新启动,将您注销并加载选择(Choose)一个选项屏幕。在此处,选择疑难解答(Troubleshoot)>高级选项(Advanced options)>启动设置(Startup Settings)>重新启动(Restart)。
- 根据您要启动的安全模式(Safe Mode)选项选择4或5 。
在 Windows 10 中退出安全模式(Exit Safe Mode in Windows 10)
要退出Windows 10中的安全模式(Safe Mode),只需重新启动您的设备。
或者,您可以再次打开系统配置(System Configuration)工具,选择引导(Boot)选项卡,然后取消选择引导选项下的安全(Boot)引导(Safe Boot)复选框。
视窗 8 和 8.1(Windows 8 and 8.1)
与Windows 10一样,您可以从高级启动(Advanced Startup)选项中的(Options)启动设置(Startup Settings)菜单访问Windows 8中的安全模式(Mode)。
您可以通过按住Shift键并选择重新启动来访问(Restart)高级启动(Advanced Startup) 选项(Options)。但是,此方法不适用于屏幕键盘,因此您需要将物理键盘连接到计算机才能以这种方式打开菜单。
或者,您可以使用“设置”(Settings)菜单访问“高级启动(Advanced Startup) 选项(Options)”菜单并在Windows 8/8.1中启动进入安全模式(Mode)。
- 打开超级按钮栏(Charms bar),然后选择更改 PC 设置(Change PC Settings)。
- 选择更新和恢复(Update and Recovery)>恢复(Recovery)。
- 接下来,从Advanced startup 部分中选择(Advanced startup section)Restart now。
- 在选择(Choose)一个选项菜单中,选择疑难解答(Troubleshoot)>高级(Advanced) 启动选项(Startup Options)>启动设置(Startup Settings)>重新启动(Restart)。PC 重新启动后,按4或5(或F4或F5)选择安全模式选项。(Mode)
- 等待(Wait)安全模式(Safe Mode)加载,您将在计算机启动时看到正常的登录屏幕。
- 使用您的管理员凭据登录,在安全模式下(Safe Mode)进行必要的更改,然后重新启动计算机以退出安全模式(Safe Mode)。
Windows 7的(Windows 7)
Microsoft不再支持Windows 7,这意味着您将不再收到安全更新和技术支持。但是,您仍然可以从系统配置(System Configuration)实用程序进入Windows 7中的安全模式。(Safe Mode)
- 搜索msconfig,然后在系统配置(System Configuration)实用程序窗口中选择引导(Boot)选项卡。
- 选中引导选项(Boot Options)部分下安全引导旁边的复选框。(Safe Boot)
- 接下来,选择Minimal进入 Safe Mode 或Network进入Safe Mode with Networking,然后选择OK。
- 选择重新启动(Restart)。
视窗(Windows XP)
微软(Microsoft)也终止了对Windows XP的支持。虽然您将不再收到安全更新或补丁,但您仍然可以在操作系统中访问安全模式。(Mode)
- 如果计算机已关闭,请打开计算机电源,并在出现第一个屏幕时重复按F8键。(F8)
- 从高级选项菜单(Advanced Options Menu)中选择安全模式(Safe Mode),然后按Enter。
- 当Windows XP(Windows XP)桌面出现时,选择管理员(Administrator)输入您的密码。
如果您的计算机已经开机,请使用以下步骤。
- 选择开始(Start)>运行(Run)。在“运行”对话框中键入msconfig ,然后按(msconfig)Enter打开MS 配置实用程序(MS Configuration Utility)。
- 选择Boot.INI选项卡,然后在Boot Options下选择/SAFEBOOT。
- 接下来,选择“最小(Minimal)” > “确定(OK)” ,然后在提示时选择“重新启动”。(Restart)
- 在安全模式下(Safe Mode)完成故障排除后,重复相同的步骤,但取消选择/SAFEBOOT选项以防止您的计算机在安全模式下(Safe Mode)启动。
在安全模式下解决各种问题(Solve All Kinds of Problems in Safe Mode)
了解如何访问安全模式(Safe Mode)可以帮助您排除故障并完成多项功能,包括扫描恶意软件(scanning for malware)、卸载软件(uninstalling software)、更新旧驱动程序和恢复整个系统。
您还可以解决蓝屏死机(Blue Screen of Death)错误和其他涉及DLL文件和设备驱动程序的问题。
发表评论,让我们知道本指南是否帮助您在计算机上访问Windows 安全模式(Windows Safe Mode)。
How to Boot into Safe Mode in All Versions of Windows
If yоur computer is acting up, Windows Safe Mode can help you troubleshoot problems that interrupt or prevent Windows from startіng normally. This way, yоu сan make rеpairs on your own without having to visit а computer repair ѕhop.
Safe Mode starts Windows in a basic state using a limited set of files and drivers so you can observe Windows and narrow down the source of the problem.
Prior to Windows 10, you could easily enter Safe Mode by repeatedly pressing the F8 key during a restart. Some computer manufacturers have since disabled the F8 key function, but you can still use the F8 method to enter Safe Mode in Windows 7, Vista and XP.
Here’s how to boot into Safe Mode in all versions of Windows.
Windows 10
In Windows 10, you can access Safe Mode using different methods including:
- The sign-in screen.
- From a blank or black screen.
- Using Windows Settings.
- From a recovery drive.
- Using System Configuration.
- Using the Shutdown command in Command Prompt.
Boot into Safe Mode from the Sign-in Screen
If you’re on the Windows sign-in screen, you can get into Windows safe mode in a few steps.
- Press and hold Shift while selecting Power > Restart.
- Once your PC restarts, select the Choose an option screen.
- Select Troubleshoot.
- Next, select Advanced options.
- Next, select Startup Settings.
- Select Restart and once your PC restarts, select 4 to Enable Safe Mode or 5 for Safe Mode with Networking.
Note: If you’ve encrypted your computer, you may be asked to enter your BitLocker key before booting into Safe Mode. Safe Mode with Networking includes the services and network drivers needed to access other computers on your network and to access the internet.
Boot into Safe Mode from a Black or Blank Screen
There are several reasons why you may be seeing a blank or black desktop screen. For instance, you may have encountered the Windows 10 Black Screen of Death or there’s a problem with the screen.
You can still enter Windows Safe Mode from a black or blank screen, but you’ll need to enter the WinRE (Windows Recovery Environment) first.
- Press the power button and hold it down for 10 seconds until the device shuts down.
- Press the power button again to power the computer back on.
- When you see the manufacturer’s logo appear on your screen, hold down the power button again for 10 seconds to turn off the computer and then power it back on.
- Once Windows restarts, downpress the power button to turn off the computer, and then press the power button again to power it on.
- Allow the device to fully restart and you’ll enter the WinRE.
- Select Troubleshoot > Advanced options > Startup Settings > Restart.
- Once your PC restarts, select Enable Safe Mode (4) or Safe Mode with Networking (5).
Boot into Safe Mode from Settings
If you can log into Windows 10, you can enter Safe Mode from the Settings app.
- Select Start > Settings > Update & Security.
- Next, select Recovery > Advanced startup > Restart now.
- Select Troubleshoot > Advanced options > Startup Settings > Restart on the Choose an option menu, and then select Enable Safe Mode or Safe Mode with Networking.
From a Recovery Drive
You can create a recovery drive if you don’t have one already and use it to access Safe Mode.
- Connect the recovery drive and power on your computer. Press Windows logo key + L to get to the sign-in screen and then use the steps to restart your computer in WinRE.
- In the Choose an option menu and select Troubleshoot > Advanced options > Startup Settings > Restart. Select Enable Safe Mode (4) or Safe Mode with Networking (5).
Note: If you don’t see the Choose an option menu, your computer may not be set up to boot from a drive, but you can change the boot order.
Using System Configuration
You can also use the System Configuration tool to enter into Windows Safe Mode.
- Right-click Start > Run.
- Type msconfig.exe in the Run dialog box and press Enter.
- Select the Boot tab in the System Configuration window, select Safe Boot under Boot options and press OK.
- If Windows prompts you to restart your computer, select Restart to access Safe Mode.
Using Shutdown Command in Command Prompt
You can enter Safe Mode using the shutdown.exe command in Command Prompt.
- Type CMD in the search field and select Command Prompt > Run as administrator.
- Next, type shutdown.exe command and press Enter.
- Windows will restart in WinRE, sign you out and load the Choose an option screen. From here, select Troubleshoot > Advanced options > Startup Settings > Restart.
- Select 4 or 5 depending on the Safe Mode option you want to boot into.
Exit Safe Mode in Windows 10
To exit Safe Mode in Windows 10, simply restart your device.
Alternatively, you can open the System Configuration tool again, select Boot tab and then deselect the Safe Boot checkbox under Boot options.
Windows 8 and 8.1
Like Windows 10, you can access Safe Mode in Windows 8 from the Startup Settings menu in Advanced Startup Options.
You can access the Advanced Startup Options by holding down the Shift key and selecting Restart. However, this method won’t work with the on-screen keyboard, so you’ll need to connect a physical keyboard to your computer to open the menus this way.
Alternatively, you can use the Settings menu to access the Advanced Startup Options menu and boot into Safe Mode in Windows 8/8.1.
- Open the Charms bar and then select Change PC Settings.
- Select Update and Recovery > Recovery.
- Next, select Restart now from the Advanced startup section.
- In the Choose an option menu, select Troubleshoot > Advanced Startup Options > Startup Settings > Restart. Once your PC restarts, select a Safe Mode option by pressing 4 or 5 (or F4 or F5).
- Wait for Safe Mode to load and you’ll see the normal login screen when your computer starts.
- Login with your administrator credentials, make the necessary changes in Safe Mode and then restart your computer to exit Safe Mode.
Windows 7
Microsoft is no longer supporting Windows 7, which means you will no longer receive security updates and tech support. However, you can still enter Safe Mode in Windows 7 from the System Configuration utility.
- Search for msconfig and then select the Boot tab in the System Configuration utility window.
- Select the checkbox next to Safe Boot under the Boot Options section.
- Next, select Minimal to enter Safe Mode or Network to enter Safe Mode with Networking, and then select OK.
- Select Restart.
Windows XP
Microsoft also ended support for Windows XP. While you’ll no longer receive security updates or patches, you can still access Safe Mode in the operating system.
- Power on your computer if it’s off and press the F8 key repeatedly when the first screen appears.
- Select Safe Mode from the Advanced Options Menu and then press Enter.
- Select Administrator to enter your password when the Windows XP desktop appears.
If your computer was already powered on, use the steps below.
- Select Start > Run. Type msconfig in the Run dialog box and press Enter to open the MS Configuration Utility.
- Select Boot.INI tab and then select /SAFEBOOT under Boot Options.
- Next, select Minimal > OK and then select Restart when prompted to.
- Once you’re done troubleshooting in Safe Mode, repeat the same steps but deselect the /SAFEBOOT option to prevent your computer from starting in Safe Mode.
Solve All Kinds of Problems in Safe Mode
Knowing how to access Safe Mode can help you troubleshoot and complete several functions including scanning for malware, uninstalling software, updating old drivers and restoring your entire system.
You may also be able to troubleshoot issues like Blue Screen of Death errors and other problems involving DLL files and device drivers.
Leave a comment and let us know whether this guide helped you access Windows Safe Mode on your computer.