混合现实将现实世界和虚拟内容融合到物理和数字对象(Mixed Reality)共存和交互(coexist and interact)的混合环境中。在这篇文章中,我们将向您展示如何在Windows 10中配置(Windows 10)混合现实(Mixed Reality)设置。
在Windows 10(Windows 10)中配置混合现实(Mixed Reality)设置
运行Windows Mixed Reality所需的内容包括:
- Windows 混合现实头戴式显示器 (HMD)(Mixed Reality head mounted display (HMD))。
- 运行Windows 10版本 1709(Version 1709)或更高版本的 Windows Mixed Reality 兼容电脑。(Windows Mixed Reality compatible PC)
- 显示器(Display)、USB 3.0和蓝牙 4.0(Bluetooth 4.0)或适配器(如果需要)。
- 运动控制器(Motion Controllers)、Xbox 控制器(Xbox controller)或鼠标和键盘(mouse and keyboard)。
- 带麦克风的耳机(如果您的HMD 没有(HMD doesn)内置)。
- 互联网连接。
- 一个很大的开放空间。
我们将在本节中概述的方法下探索这个主题,如下所示:
设置(Set)Windows混合现实耳机(Windows Mixed Reality Headset)
要在Windows 10中设置Windows Mixed Reality Headset,请执行以下操作:
- (Pair)如果使用运动控制器,请将它们与您的 PC配对。
- 从“开始”菜单打开混合现实门户(Mixed Reality Portal)应用。
- 单击开始(Get started)。
- 单击我同意(I agree) 开始兼容性检查。
- 如果它以“ Good to go”报告您的 PC 支持Windows Mixed Reality ,请单击“下一步(Next)” 。
- 现在,将耳机连接到 PC 的USB 3.0 端口和 HDMI(port and HDMI)输出端口,但先不要戴上耳机。
- 您现在将在屏幕上看到一条正在 准备设置您的(Getting ready to set you up)消息,带有一个旋转图标。这应该只需要几分钟。
- 您现在将看到 针对您的特定品牌和型号的耳机打开了一个单独(brand and model)Meet your <name of headset>应用程序。
- 在每个屏幕中单击下一步(Next) ,直到完成耳机的设置。
注意(Note):如果您的耳机有可用的固件更新,您将看到一个更新按钮(Update button)可供单击/点击以下载和安装它。
- 耳机设置(headset setup)完成后,单击下一步(Next) 设置运动控制器。
注意(Note):如果您打算使用Xbox 控制器或键盘(Xbox controller or keyboard)和鼠标而不是运动控制器(motion controller),请单击使用游戏手柄或鼠标(Use a gamepad or mouse instead)链接跳过此步骤。
- 了解您的运动控制器后单击下一步。(Next)
- 现在,按住运动控制器上的Windows按钮,直到它们发出嗡嗡声以将其打开。
- 当您配对的运动控制器显示为已连接时,单击下一步。(Next)
- 此时,您可能需要设置房间边界(room boundary) 或不设置。
- 设置完房间边界(room boundary)后,如果要在混合现实中启用Cortana命令,请单击使用语音(Use Speech)。
- 它现在将完成一些下载。
- 完成设置后,混合现实门户应用程序应在您的(Mixed Reality Portal app)HMD中启动名为 Learn Mixed Reality的沉浸式体验 ,它将教您如何使用Windows Mixed Reality。
- 您现在已完成Windows Mixed Realty和耳机的设置。现在,您将在 Windows 10 PC 上的“设置”(Settings )应用中拥有一个新的 混合现实(Mixed reality)页面 。
您可以观看以下来自Microsoft的视频,了解如何在Windows 10中设置Windows Mixed Reality Headset。
(Change Mixed Reality App Window Resolution)更改耳机(Headset)的混合现实应用程序窗口分辨率
- 打开 设置。(Settings.)
- 单击/点击混合现实(Mixed reality)图标。
- 单击左侧窗格中的耳机显示。(Headset display)
- 在右窗格中,在 我家的视觉质量下,(Visual quality of my home, )在 更改应用程序窗口分辨率(Change app window resolution)下拉菜单中,根据要求选择720p (默认)或 1080p。
- 退出设置。
- 关闭并重新打开混合现实门户(Mixed Reality Portal) 应用程序(如果打开)以应用。
更改(Change Experience Options)混合现实耳机显示(Mixed Reality Headset Display)的体验选项
- 打开 设置。(Settings.)
- 单击混合现实(Mixed reality)图标。
- 单击左侧的耳机显示。(Headset display)
- 在右侧窗格的体验选项(Experience options)下拉菜单中,选择让 Windows 决定(Let Windows decide) (默认)、 优化性能(Optimize for performance) (最低质量)或 最佳视觉质量(Best visual quality)(最高质量)每个要求。
(Change Frame Rate)更改混合现实耳机显示(Mixed Reality Headset Display)的帧率
帧速率(frame rate)设置允许您 调整头戴式(headset’s) 显示器的 帧速率。(frame rate)此设置可能会影响您 PC 的性能。
要更改Windows 10中混合现实耳机显示器(Mixed Reality Headset Display)的帧速率(Frame Rate),请执行以下操作:
- 打开 设置。(Settings.)
- 单击混合现实(Mixed reality)图标。
- 单击左侧的耳机显示。(Headset display)
- 在右侧窗格的 调整帧速率(Adjust frame rate)下拉菜单中,选择让 Windows 决定(Let Windows decide) (默认)、 90Hz或 60Hz 每个要求。
- 如果您选择 Automatic,Windows Mixed Reality将确定并选择适合您的 PC 硬件配置的最佳刷新率体验。(rate experience)对于大多数人来说,这是开始的最佳选择。
- 如果选择60Hz ,则(60Hz)耳机显示屏(headset display)的刷新率将设置为 60Hz,并且某些混合现实功能将被关闭,例如混合现实门户(Mixed Reality Portal)中的视频捕获和预览(capture and preview)。
- 如果您选择90Hz ,耳机显示屏(headset display)的刷新率将设置为 90Hz,如果您的PC(PC doesn)不满足 要求(requirements),某些体验和 PC 配置可能无法正常运行。
- 退出设置。
(Adjust Mixed Reality Visual Quality)调整耳机显示器(Headset Display)的混合现实视觉质量
- 打开 设置。(Settings.)
- 单击混合现实(Mixed reality)图标。
- 单击左侧的耳机显示。(Headset display)
- 在右侧窗格中,在我家的视觉质量下(Visual quality of my home),
- 在混合现实主页中的 调整细节级别和效果质量(Adjust level of detail and quality of effects in the mixed reality home)下拉菜单中,选择让 Windows 决定(Let Windows decide) (默认)、 低(Low)、 中(Medium)或 高(High)来满足您的需求。
当 视觉质量(Visual quality)(Visual quality) 设置为 让 Windows 决定(Let Windows decide) (自动)时,它将为您的 PC 选择最佳混合现实体验(reality experience)。要获得更多视觉细节的体验,请将 视觉质量(Visual quality)设置 为 高(High)。如果您的视觉效果不稳定,您可能需要选择较低的设置。
- 退出设置。
- 关闭并重新打开混合现实门户(Mixed Reality Portal) 应用程序(如果打开)以应用。
检查混合现实耳机分辨率(Check Mixed Reality Headset Resolution)
注意(Note):需要连接耳机以检查其分辨率。
- 打开 设置。(Settings.)
- 单击混合现实(Mixed reality)图标。
- 单击左侧的耳机显示。(Headset display)
- 在右侧窗格中,您现在将在分辨率下看到耳机分辨率(Headset resolution) (例如:2880×1600) 。(Resolution.)
清除Windows Mixed Reality的环境数据(Environment Data)
跟踪系统(tracking system)存储了一些环境数据,以便它可以调用诸如房间边界(room boundary)之类的事物的真实物理位置。此信息,包括您的边界,可以随时删除。
如果您清除此数据,部分应用内容可能会从您的环境中消失,系统将不再识别您的空间,您将不再看到您设置的边界。如果您希望再次创建边界,则必须重新设置它。
要在 Windows 10 电脑上清除Windows Mixed Reality的(Windows Mixed Reality)环境数据(Environment Data),请执行以下操作:
- 打开 设置。(Settings.)
- 单击混合现实(Mixed reality)图标。
- 单击左侧的环境。(Environment)
- 在右侧窗格中,单击清除环境数据(Clear environment data)按钮。
- 退出设置。
阅读(Read):更改桌面和 Windows 混合现实输入切换。
将Windows Mixed Reality 主页重置(Reset Windows Mixed Reality Home)为默认值
您可以根据需要重置您的主页,以将Windows Mixed Reality 主页中的(Windows Mixed Reality home)应用和内容(apps and content)恢复为出厂默认布局(factory default layout)。
要在 Windows 10 电脑上将Windows Mixed Reality 主页(Windows Mixed Reality Home)重置为默认值,请执行以下操作:
- 将耳机连接(Connect your headset)到 PC 的USB 3.0 端口和 HDMI(port and HDMI)输出端口。不要戴上耳机。
注意:是否打开(Note)混合现实门户应用程序(Mixed Reality Portal app)是可选的。
- 打开 设置。(Settings.)
- 单击混合现实(Mixed reality)图标。
- 单击左侧的环境。(Environment)
- 在右侧窗格中,单击重置我的主页(Reset my home)按钮。
- 退出设置。
这就是如何在Windows 10中配置(Windows 10)混合现实(Mixed Reality)的一些设置!
相关文章:运行(Related posts)混合现实门户(Mixed Reality Portal)时打开或关闭(Off)设置。
How to configure Mixed Reality settings in Windows 10
Mixed Reality blends real-world and virtual content into hybrid environments where physical and digіtal оbjects сoexist аnd interact. In this post, we will show you how to configure Mіxed Reality settings in Windows 10.
Configure Mixed Reality settings in Windows 10
What you’ll need to run Windows Mixed Reality includes:
- A Windows Mixed Reality head mounted display (HMD).
- A Windows Mixed Reality compatible PC running Windows 10 Version 1709 or later.
- Display, USB 3.0, and Bluetooth 4.0 or adapter (if required).
- Motion Controllers, an Xbox controller, or a mouse and keyboard.
- Headphones with a mic (if your HMD doesn’t have them built in).
- An Internet connection.
- A large open space.
We’ll explore this topic under the methods outlined below in this section as follows:
Set up Windows Mixed Reality Headset
To set up Windows Mixed Reality Headset in Windows 10, do the following:
- Pair your motion controllers with your PC if using them.
- Open the Mixed Reality Portal app from your Start menu.
- Click Get started.
- Click I agree to start the compatibility check.
- Click Next if it reports back with “Good to go” that your PC supports Windows Mixed Reality.
- Now, connect your headset to your PC’s USB 3.0 port and HDMI out port, but do not put on your headset yet.
- You will now see a Getting ready to set you up message on your screen with a spinning icon. This should only take a few moments.
- You will now see a separate Meet your <name of headset> app open for your specific brand and model of headset.
- Click Next in each screen until finished with the setup of your headset.
Note: If there is a firmware update available for your headset, you will see an Update button available to click/tap on to download and install it.
- Once the headset setup is completed, click Next to set up your motion controllers.
Note: Click the Use a gamepad or mouse instead link to skip this step if you plan to use an Xbox controller or keyboard and mouse instead of a motion controller.
- Click Next after getting to know your motion controllers.
- Now, press and hold the Windows button on your motion controllers until they buzz to turn them on.
- Click on Next when your paired motion controllers show as connected.
- At this point, you may want set up your room boundary or not.
- When you’re done setting up room boundary, if you want to enable Cortana commands inside of mixed reality, click on Use Speech.
- It will now finish up on some downloading.
- After finishing setup, the Mixed Reality Portal app should launch an immersive experience in your HMD called Learn Mixed Reality that will teach you how to use Windows Mixed Reality.
- You are now all done setting up Windows Mixed Realty and your headset. You will now have a new Mixed reality page in the Settings app on your Windows 10 PC.
You can watch the video below from Microsoft on how to set up Windows Mixed Reality Headset in Windows 10.
Change Mixed Reality App Window Resolution for Headset
- Open Settings.
- Click/tap on the Mixed reality icon.
- Click on Headset display on the left pane.
- On the right pane, under Visual quality of my home, in the Change app window resolution drop menu, select 720p (default) or 1080p per requirement.
- Exit Settings.
- Close and reopen the Mixed Reality Portal app (if open) to apply.
Change Experience Options for Mixed Reality Headset Display
- Open Settings.
- Click the Mixed reality icon.
- Click Headset display on the left side.
- On the right pane, in the Experience options drop-down menu, select Let Windows decide (default), Optimize for performance (lowest quality), or Best visual quality (highest quality) per requirement.
Change Frame Rate of Mixed Reality Headset Display
The frame rate setting allows you to adjust the frame rate of your headset’s display. This setting may impact performance on your PC.
To change Frame Rate of Mixed Reality Headset Display in Windows 10, do the following:
- Open Settings.
- Click the Mixed reality icon.
- Click Headset display on the left side.
- On the right pane, in the Adjust frame rate drop-down menu, select Let Windows decide (default), 90Hz, or 60Hz per requirement.
- If you choose Automatic, Windows Mixed Reality will determine and choose the best refresh rate experience for your PC’s hardware configuration. For most people, this is the best choice to start with.
- If you choose 60Hz, the refresh rate of the headset display gets set to 60Hz, and some mixed reality features will be turned off, such as video capture and preview in Mixed Reality Portal.
- If you choose 90Hz, the refresh rate of the headset display gets set to 90Hz, and some experiences and PC configurations might not run as well if your PC doesn’t meet requirements.
- Exit Settings.
Adjust Mixed Reality Visual Quality for Headset Display
- Open Settings.
- Click the Mixed reality icon.
- Click Headset display on the left side.
- On the right pane, under Visual quality of my home,
- in the Adjust level of detail and quality of effects in the mixed reality home drop-down menu, select Let Windows decide (default), Low, Medium, or High for what you want.
When Visual quality is set to Let Windows decide (automatic), it’ll choose the best mixed reality experience for your PC. For an experience with more visual detail, set Visual quality to High. If your visuals are choppy, you may want to select a lower setting.
- Exit Settings.
- Close and reopen the Mixed Reality Portal app (if open) to apply.
Check Mixed Reality Headset Resolution
Note: It is required to have the headset connected to check its resolution.
- Open Settings.
- Click the Mixed reality icon.
- Click Headset display on the left side.
- On the right pane, you will now see the Headset resolution (ex: 2880×1600) under Resolution.
Clear Environment Data for Windows Mixed Reality
The tracking system stores some environment data so that it can recall the real-world physical location of things like your room boundary. This information, including your boundary, can be removed at any time.
If you clear this data, some app content may disappear from your environment, the system will no longer recognize your space, and you will no longer see the boundary you set up. If you wish to create the boundary again, you will have to set it up again.
To clear Environment Data for Windows Mixed Reality on your Windows 10 PC, do the following:
- Open Settings.
- Click the Mixed reality icon.
- Click on Environment on the left side.
- On the right pane, click on the Clear environment data button.
- Exit Settings.
Read: Change Desktop and Windows Mixed Reality Input Switching.
Reset Windows Mixed Reality Home to Default
You can reset your home as needed to return the apps and content in the Windows Mixed Reality home to the factory default layout.
To reset Windows Mixed Reality Home to Default on your Windows 10 PC, do the following:
- Connect your headset to your PC’s USB 3.0 port and HDMI out port. Do not put on your headset.
Note: It is optional to have the Mixed Reality Portal app open or not.
- Open Settings.
- Click the Mixed reality icon.
- Click on Environment on the left side.
- On the right pane, click the Reset my home button.
- Exit Settings.
That’s it on how to configure some settings for Mixed Reality in Windows 10!
Related posts: Turn On or Off settings when Mixed Reality Portal is Running.