Wdf01000.sys 是一个BSOD(蓝屏死机)错误(BSOD (Blue Screen of Death) error),当Windows 驱动程序框架(Windows Driver Frameworks)( WDF ) 无法在Windows 10中正常工作时出现。它通常伴随着系统服务异常(System Service Exception)或驱动程序验证程序检测到违规(Driver Verifier Detected Violation)停止代码,过时或有故障的设备驱动程序是主要原因。
如果您刚开始遇到Wdf01000.sys BSOD,您可以通过以下修复来解决问题。如果您在应用它们时遇到问题(例如,系统立即崩溃),请将Windows 10 引导至安全模式(boot Windows 10 into Safe Mode),然后重试。
更新驱动程序
修复Wdf01000.sys BSOD的最佳方法是更新计算机上的设备驱动程序。由于Windows 10包含许多驱动程序,因此使用专用的驱动程序更新工具(using a dedicated driver updater tool)(例如DriverPack或Driver Booster)是让所有内容快速更新的最快方法。
获取更新驱动程序更新的另一种方法是利用Windows Update。打开“开始(Start)”菜单并转到“设置”(Settings) > “ Windows 更新”(Windows Update) > “查看可选更新(View optional updates)”以选择并应用最新的 Microsoft 验证驱动程序更新。
更新 Windows 10
安装最新的 Windows 10 更新可增强操作系统的稳定性。默认情况下,Windows 更新会(Windows Update)自动下载并应用较新的版本。但您始终可以前往开始(Start)>设置(Settings)> Windows 更新(Windows Update),然后选择检查更新(Check for updates)以手动搜索和安装它们。
断开外部外围设备
断开外部外围设备(例如图像扫描仪和打印机)并重新启动您的 PC 可能最终会修复Wdf01000.sys 蓝屏死机(Wdf01000.sys BSOD)。如果这样做有帮助,请重新连接每台设备,直到找出导致问题的原因。然后,手动在线搜索驱动程序更新或联系硬件制造商寻求支持。
回滚或重新安装驱动程序
驱动程序(Driver)更新也可能引入问题。如果Wdf01000.sys BSOD在最近的驱动程序更新后开始出现,请尝试将其回滚。打开设备管理器(Device Manager)(按Windows + X并选择设备管理器(Device Manager)),展开硬件类别,右键单击驱动程序,然后选择属性(Properties)。然后,切换到Driver选项卡并选择Roll Back Driver。
此外,您可能需要注意损坏的设备驱动程序。设备管理器(Device Manager)通常用黄色感叹号标记这些。如果您看到其中之一,请尝试将其删除(右键单击并选择Uninstall device)。在确认您的操作之前,请务必选中删除此设备的驱动程序软件旁边的框。(Delete the driver software for this device)下次重新启动计算机时,Windows 10 将重新安装驱动程序。
注意:(Note:)可以使用 BSOD 分析工具(use a BSOD analytical tool)来查明触发Wdf01000.sys BSOD的特定驱动程序。Microsoft 的 Windbg Preview(Microsoft’s Windbg Preview)或NirSoft BlueScreenView可以帮助您。
修复系统注册表
损坏或损坏(corrupt or broken system registry)的系统注册表通常会导致严重问题。您可以使用免费版本的Wise Registry Cleaner来解决这个问题。下载并安装程序后,打开它并选择深度扫描(Deep Scan)以扫描并解决与注册表相关的问题。
扫描恶意软件
计算机(Computer)病毒会严重破坏Windows 10的稳定性。如果Wdf01000.sys BSOD再次出现,您必须扫描系统以查找恶意软件。Windows 安全提供了不错的保护,但它在(Windows Security)删除劫持者、木马和 rootkit(removing hijackers, trojans, and rootkits)方面并不是最好的。使用Malwarebytes的免费版本将为您带来最佳结果。
完成下载和安装 Malwarebytes 后,您可以通过选择Scan对易受攻击的系统相关区域执行快速扫描。然后,您可以通过选择扫描仪(Scanner)>高级扫描仪(Advanced scanner)>配置扫描(Configure scan)>扫描来进行更深入的扫描(Scan)。
修复 Windows 10
Windows 10 因多种原因成为文件损坏的牺牲品,这可能会触发Wdf01000.sys 蓝屏死机(Wdf01000.sys BSOD)。您可以尝试通过提升的Windows PowerShell控制台运行系统文件检查器(System File Checker)( SFC ) 和部署映像服务(Deployment Image Servicing)和管理(Management)( DISM ) 工具来解决它们(按(DISM)Windows + X并选择Windows PowerShell (Admin)。我们建议运行SFC扫描第一的。
运行系统文件检查器:
sfc /scannow
运行 DISM 工具:
DISM /Online /Cleanup-Image /RestoreHealth
修复磁盘错误
由于磁盘错误,Windows 10 也可能遇到与 BSOD 相关的问题。您可以使用检查磁盘(Check Disk)( CHKDSK ) 实用程序来扫描和修复它们。为此,请打开提升的Windows PowerShell控制台并执行以下命令:
chkdsk C: /R
检查磁盘(Check Disk)实用程序不会立即修复磁盘。您必须确认下次重新启动 PC 时要运行它。
执行系统还原
如果上述修复都没有帮助,您可能需要考虑将操作系统恢复到您没有遇到Wdf01000.sys BSOD的时间。
如果您之前花时间在 Windows 10 中设置系统还原(set up System Restore in Windows 10),请先按Windows + R并运行sysdm.cpl命令。在随后显示的“系统(System) 属性(Properties)”对话框中,切换到“系统保护(System Protection)”选项卡并选择“系统还原”(System Restore)。
然后,您可以选择“推荐还原(Recommended restore)”以撤消对 PC 的最新更改。或者,选择选择不同的还原点(Choose a different restore point)以回滚到不同的还原点。
重置 Windows 10
更新 Windows 10 PC 上的驱动程序通常有助于修复Wdf01000.sys 蓝屏死机(Wdf01000.sys BSOD)。如果没有,花点时间进行剩余的修复肯定会解决该错误。但是,如果错误再次发生,请考虑将 Windows 10 重置为出厂默认设置(resetting Windows 10 to factory defaults)。这应该可以解决任何潜在的问题,并为重新开始工作提供一个新的平台。
How To Fix wdf01000.Sys BSOD on Windows
Wdf01000.sys is a BSOD (Blue Screen of Death) error that shows up when Windows Driver Frameworks (WDF) fails to work correctly in Windows 10. It’s usually accompanied by the System Service Exception or Driver Verifier Detected Violation stop codes, with outdated or faulty device drivers being the chief reason.
If you just started encountering the Wdf01000.sys BSOD, you can sort things out by working your way through the following fixes. If you have trouble applying them (as in, the system crashes immediately), boot Windows 10 into Safe Mode and try again.
Update the Drivers
The best way to fix the Wdf01000.sys BSOD is by updating the device drivers on your computer. Since Windows 10 contains many drivers, using a dedicated driver updater tool, such as DriverPack or Driver Booster, is the fastest way to get everything up-to-date quickly.
Another way to get newer driver updates is by taking advantage of Windows Update. Open the Start menu and go to Settings > Windows Update > View optional updates to select and apply the most recent Microsoft-verified driver updates.
Update Windows 10
Installing the latest Windows 10 updates enhances the stability of the operating system. By default, Windows Update automatically downloads and applies newer versions. But you can always head over to Start > Settings > Windows Update and select Check for updates to search for and install them manually.
Disconnect External Peripherals
Disconnecting external peripherals (such as image scanners and printers) and restarting your PC may end up fixing the Wdf01000.sys BSOD. If that does help, reconnect each device until you figure out what’s causing the issue. Then, manually search for driver updates online or contact the hardware manufacturer for support.
Roll Back or Reinstall Drivers
Driver updates can also introduce issues. If the Wdf01000.sys BSOD started showing up after a recent driver update, try rolling it back. With Device Manager open (press Windows + X and select Device Manager), expand the hardware category, right-click the driver, and choose Properties. Then, switch to the Driver tab and choose Roll Back Driver.
Additionally, you may want to watch out for corrupt device drivers. The Device Manager usually flags these with a yellow-colored exclamation mark. Try removing it if you see one of these (right-click and select Uninstall device). Make sure to check the box next to Delete the driver software for this device before confirming your action. Windows 10 will reinstall the driver the next time you reboot your computer.
Note: It’s possible to use a BSOD analytical tool to pinpoint specific drivers that trigger the Wdf01000.sys BSOD. Microsoft’s Windbg Preview or NirSoft BlueScreenView can help you with that.
Repair the System Registry
A corrupt or broken system registry often results in serious issues. You can fix that using the free version of Wise Registry Cleaner. After downloading and installing the program, open it and select Deep Scan to scan for and resolve registry-related issues.
Scan for Malware
Computer viruses can severely destabilize Windows 10. If the Wdf01000.sys BSOD recurs, you must scan the system for malware. Windows Security offers decent protection, but it’s not the best at removing hijackers, trojans, and rootkits. Using the free version of Malwarebytes will net you the best results.
Once you’ve finished downloading and installing Malwarebytes, you can perform a quick scan of vulnerable system-related areas by selecting Scan. You can then do a deeper scan by selecting Scanner > Advanced scanner > Configure scan > Scan.
Repair Windows 10
Windows 10 falls prey to file corruption for a myriad of reasons, and that can trigger the Wdf01000.sys BSOD. You can attempt to resolve them by running the System File Checker (SFC) and Deployment Image Servicing and Management (DISM) tool via an elevated Windows PowerShell console (press Windows + X and select Windows PowerShell (Admin). We recommend running an SFC scan first.
Run the System File Checker:
sfc /scannow
Run the DISM Tool:
DISM /Online /Cleanup-Image /RestoreHealth
Repair Disk Errors
Windows 10 can also run into BSOD-related issues due to disk errors. You can use the Check Disk (CHKDSK) utility to scan for and repair them. To do that, open an elevated Windows PowerShell console and execute the following command:
chkdsk C: /R
The Check Disk utility won’t repair the disk right away. You must confirm that you want to run it the next time you restart your PC.
Perform a System Restore
If none of the fixes above helped, you might want to consider restoring the operating system to a time when you didn’t encounter the Wdf01000.sys BSOD.
Provided that you’ve previously taken the time to set up System Restore in Windows 10, start by pressing Windows + R and running the sysdm.cpl command. On the System Properties dialog box that then shows up, switch to the System Protection tab and select System Restore.
You can then select Recommended restore to undo the most recent change to your PC. Or, select Choose a different restore point to roll back to a different restore point.
Reset Windows 10
Updating the drivers on your Windows 10 PC usually helps fix the Wdf01000.sys BSOD. If not, taking your time with the remaining fixes will definitely take care of the error. However, on the off chance that the error recurs, consider resetting Windows 10 to factory defaults. That should address any underlying issues and provide a fresh slate to start working on again.