使用光标修复 Windows 10 黑屏: (Fix Windows 10 Black Screen with Cursor: )如果您遇到笔记本电脑或 PC 屏幕(laptop or PC screen)在启动后突然变黑并且无法进入登录屏幕(login screen)的问题,那么请不要担心,今天(t worry today)我们将了解如何解决解决这个问题。当您启动 PC 时,它通常会启动并且您会看到 Windows 10登录屏幕(login screen),但在这种情况下,您会看到带有Windows 徽标的(Windows logo)BIOS 屏幕,但之后您会看到一个带有(BIOS screen)鼠标光标(mouse cursor)的黑屏。
鼠标(mouse click doesn)左键或右键在黑屏上不起作用,你只能在黑屏上拖动鼠标指针(mouse pointer),没什么用处。键盘在黑屏上也没有响应,按 Ctrl + Alt + Del 或 Ctrl + Shift + Esc 没有任何作用,基本上,没有任何作用,你被卡在黑屏上。您唯一能做的就是强制关闭您的 PC 并将其关闭。
这个问题没有特别的原因,因为它可能是由损坏、不兼容或过时的显示驱动程序、损坏的Windows 或系统文件(Windows or system files)、电池残留等引起的。如果您尝试启动到安全模式,那么您将在加载时再次卡住文件屏幕,您将再次看到带有鼠标光标(mouse cursor)的黑屏。无论如何(Anyway),不要浪费任何时间,让我们在下面列出的(time let)故障排除指南(troubleshooting guide)的帮助下看看如何使用光标(Cursor)修复 Windows 10(Fix Windows 10) 黑屏(Black Screen)。
(Fix)用光标(Cursor)修复Windows 10黑屏(Black Screen)
确保(Make)创建一个还原点(restore point) 以防万一(case something)出现问题。
如果您能够登录Windows ,请尝试以下步骤:
要访问Windows,您需要以带网络的安全(Network)模式(Mode)重新启动计算机,然后按照下面列出的方法进行操作。
方法 1:电源重置您的笔记本电脑
您应该尝试的第一件事是从笔记本电脑中取出电池,然后拔下所有其他USB 附件(USB attachment)、电源线等(power cord etc)。完成后,按住电源按钮(power button)15 秒钟,然后再次插入电池并尝试再次为电池充电,看看您是否能够 修复带有光标问题的 Windows 10 黑屏。( Fix Windows 10 Black Screen with Cursor Issue.)
方法 2:切换显示
1.按Windows Key + P打开项目菜单。(Project menu.)
2.由于黑屏,您将无法看到项目菜单(Project menu),不用担心,这是完全正常的。
3.您需要按几次向上或向下箭头键并按Enter。(press up or down arrow key)
4.如果您没有看到您的屏幕并且仍然卡在黑屏上,那么您可能需要重复上述步骤几次。
注意:(Note:)如果您的Windows 帐户(Windows account)受密码保护,则您需要按空格键(Space bar),然后输入您的密码并按 Enter 键(password and hit Enter)。完成后,只有您才能执行上述步骤。这可能很棘手,因为您将在黑屏上执行此操作,因此您可能需要尝试几次才能成功。
方法 3:卸载显卡驱动程序(Method 3: Uninstall Your Graphics Card Drivers)
1.在安全模式下按(Mode press) Windows Key + R然后输入 devmgmt.msc并按回车键打开设备管理器(Device Manager)。
2.展开显示适配器(Display adapter),然后右键单击您的集成显示适配器( integrated Display adapter)并选择卸载。(uninstall.)
3.现在,如果您有专用显卡(Graphics Card),请右键单击它并选择禁用。(Disable.)
4.现在从设备管理器菜单(Device Manager menu)中单击操作(Action),然后单击扫描硬件更改。(Scan for hardware changes.)
5.重新启动您的PC,看看您是否能够 使用光标修复Windows 10黑屏。(Fix Windows 10 Black Screen with Cursor.)
方法 4:更新您的显卡驱动程序(Method 4: Update your Graphics Card Drivers)
使用设备管理器手动更新显卡驱动程序(Manually Update Graphics Drivers using Device Manager)
1.按 Windows 键 + R 然后键入devmgmt.msc 并按回车键打开设备管理器。(Device Manager.)
2.下一步,展开显示适配器( Display adapters)并右键单击您的显卡并(Card)选择启用。(Enable.)
3.再次完成此操作后,右键单击显卡并选择“更新驱动程序(Update Driver)”。
4.选择“自动搜索更新的驱动软件(Search automatically for updated driver software)”并让它完成该过程。
5.如果上述步骤对解决问题有帮助,那么很好,如果没有,请继续。
6.再次右键单击您的显卡并选择“更新驱动程序(Update Driver)”,但这次在下一个屏幕上选择“(screen select “)浏览我的计算机以查找驱动程序软件。(Browse my computer for driver software.)“
7.现在选择“让我从计算机上的可用驱动程序列表中(Let me pick from a list of available drivers on my computer)选择” 。
8.最后,从列表中选择最新的驱动程序(select the latest driver),然后单击下一步。( Next.)
9.让上述过程完成(process finish)并重新启动PC以保存更改。
按照与集成显卡(在本例中为Intel)相同的步骤更新其驱动程序。查看您是否能够使用光标修复 Windows 10 黑屏(Fix Windows 10 Black Screen with Cursor),如果不能,则继续下一步。
从制造商网站自动更新显卡驱动程序(Automatically Update Graphics Drivers from Manufacturer Website)
1.按Windows Key + R并在对话框中键入“ (dialog box type “)dxdiag ”并回车。
2.然后搜索显示选项卡(display tab)(将有两个显示选项卡(display tab),一个用于集成显卡,另一个将是Nvidia的)单击显示选项卡(display tab)并找到您的显卡。
3.现在进入Nvidia驱动下载网站(download website),输入我们刚刚找到的产品详细信息。
4.输入信息后搜索您的驱动程序,点击同意(Agree)并下载驱动程序。
5.下载成功后,安装驱动,就成功手动更新了Nvidia驱动。(Nvidia)
方法 5:禁用快速启动(Method 5: Disable Fast Startup)
1.按Windows Key + R然后键入 control 并按Enter打开控制面板。(Control Panel.)
2.点击硬件和声音,(Hardware and Sound)然后点击电源选项(Power Options)。
3.然后从左侧窗格中选择“(left window pane select “)选择电源按钮的功能。(Choose what the power buttons do.)“
4.现在点击“更改当前不可用的设置。(Change settings that are currently unavailable.)“
5.取消选中“开启快速启动(Turn on fast startup)”并点击保存更改。
重新启动后,看看您是否能够 修复带有光标的 Windows 10 黑屏问题,(Fix Windows 10 Black Screen with Cursor issue, )如果不能,则继续下一个方法。
方法六:禁用集成显卡(Method 6: Disable Integrated Graphics Card)
1.按 Windows 键 + R 然后键入devmgmt.msc并按 Enter 打开设备管理器。(Device Manager.)
2.展开显示(Display)适配器,然后右键单击英特尔核芯显卡(Intel HD Graphics)并选择禁用。( Disable.)
3.重新启动您的 PC 以保存更改,看看您是否能够 修复带有光标问题的(Cursor Issue)Windows 10(Fix Windows 10) 黑屏(Black Screen)。
方法 7:激活内置 Windows 管理员帐户(Method 7: Activate the built-in Windows Administrator Account)
内置管理员帐户(administrator account)默认处于非活动状态,并且可以完全不受限制地访问 PC。内置管理员帐户是一个本地帐户,此帐户与用户的(Built-in Administrator Account)管理员帐户(administrator account)的主要区别在于,内置管理员帐户不(administrator account doesn)接收UAC提示,而另一个则接收。用户的管理员账户是未提升的管理员(administrator account)账户(administrator account),而内置管理员账户(administrator account)是提升的管理员账户(administrator account)。因此,不要浪费任何时间,让我们(time let)看看如何启用内置管理员帐户(Built-in Administrator Account).
方法 8:更新 BIOS(Method 8: Update your BIOS)
执行BIOS 更新(BIOS update)是一项关键任务,如果出现问题,可能会严重损坏您的系统,因此建议专家监督。
1.第一步是识别您的BIOS 版本(BIOS version),按 Windows Key + R然后输入“ msinfo32 ”(不带引号)并按回车键打开系统信息(System Information)。
2. 一旦系统信息( System Information)窗口打开,找到BIOS Version/Date,然后记下制造商和 BIOS 版本(manufacturer and BIOS version)。
3.接下来,访问您的制造商网站,例如在我的情况下是戴尔(Dell),所以我将访问戴尔网站(Dell website),然后我将输入我的计算机序列号或单击(number or click)自动检测选项(auto detect option)。
4.现在从显示的驱动程序列表中,我将单击BIOS并下载推荐的更新。
注意:(Note:)更新BIOS时请勿关闭计算机或断开(computer or disconnect)电源,(power source)否则可能会损坏计算机。在更新期间,您的计算机将重新启动,您将短暂看到黑屏。
5.下载文件后,只需双击exe文件(Exe file)即可运行它。
6.最后,您已经更新了您的BIOS,这也可以 修复带有光标的 Windows 10 黑屏。(Fix Windows 10 Black Screen with Cursor.)
方法 8:重置您的电脑(Method 8: Reset your PC)
注意:(Note:)如果您无法访问您的 PC,请重新启动您的 PC 几次,直到您开始自动修复。(Automatic Repair. )然后导航到 Troubleshoot > Reset this PC > Remove everything.
1.按Windows Key + I 打开设置(Settings),然后单击更新和安全图标。( Update & Security icon.)
2.从左侧菜单中选择恢复。( Recovery.)
3.在重置此 PC(Reset this PC)下,单击“开始(Get Started)使用”按钮。
4.选择 保留我的文件(Keep my files)的选项。
5.对于下一步,您可能会被要求插入Windows 10安装媒体。
重置或引用(reset or referesh)后,检查 Windows 10 黑屏(Black Screen)光标问题(Cursor issue)是否已解决。
方法9:修复安装Windows 10(Method 9: Repair Install Windows 10)
这种方法是最后的手段,因为如果没有任何效果,那么这种方法肯定会修复您 PC 的所有问题。修复安装(Repair Install)仅使用就地升级来修复系统问题,而不会删除系统上存在的用户数据。因此,请按照本文查看如何轻松(Easily)修复(How)安装Windows 10(Repair Install Windows 10) 。
如果您无法登录Windows ,请按照以下步骤操作:
Method 1: Run Startup/Automatic Repair
1.插入 Windows 10 可启动安装 DVD(Insert the Windows 10 bootable installation DVD)并重新启动您的 PC。
2.当提示Press any key to boot from CD or DVD时,按任意键继续。
3.选择您的语言首选项,然后单击下一步(Next)。单击左下角的修复计算机。(Click Repair)
4.在选择一个选项屏幕上(option screen),单击疑难解答(Troubleshoot)。
5.在疑难解答屏幕上,单击高级选项(Advanced option)。
6.在高级(Advanced)选项屏幕上,单击自动修复或启动修复(Automatic Repair or Startup Repair)。
7.等待Windows Automatic/Startup Repairs完成。
8.重新启动,您已成功修复带有光标问题的 Windows 10 黑屏。( Fix Windows 10 Black Screen with Cursor Issue.)
另外,请阅读 如何修复自动修复无法修复您的 PC。(How to fix Automatic Repair couldn’t repair your PC.)
方法2:运行系统还原(Method 2: Run System Restore)
1.放入Windows安装(Windows installation)媒体或Recovery Drive/System Repair Disc并选择您的语言首选项(anguage preferences),然后单击下一步
2.单击底部的修复计算机。( Repair)
3.现在选择疑难解答(Troubleshoot),然后选择高级选项。(Advanced Options.)
4..最后,点击“系统还原(System Restore)”并按照屏幕提示完成还原。
5.重新启动您的 PC 以保存更改。
方法 3:运行 SFC 和 CHKDSK(Method 3: Run SFC and CHKDSK)
1.使用上述方法使用Windows安装(Windows installation)盘打开命令提示符。(command prompt)
2.在cmd中输入(cmd and hit enter)以下命令并在每个命令后按回车:
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
chkdsk C: /f /r /x
注意:确保(Make sure)使用当前安装Windows的(Windows)驱动器号(drive letter)。同样在上面的命令中 C: 是我们要运行检查磁盘(check disk)的驱动器,/f 代表一个标志,它 chkdsk 有权修复与驱动器相关的任何错误,/r 让 chkdsk 搜索坏扇区并执行recovery and /x指示检查磁盘(check disk)在开始该过程之前卸载驱动器。
3.退出命令提示符(command prompt)并重新启动您的PC。这应该可以修复带有光标问题的 Windows 10 黑屏,(Fix Windows 10 Black Screen with Cursor Issue)但如果您仍然卡住,请继续使用下一种方法。
方法 4:运行 DISM(Method 4: Run DISM)
1.再次使用上述方法打开命令提示符并输入以下命令:(Command Prompt)
DISM /Online /Cleanup-Image /RestoreHealth
2.按回车键运行上述命令并等待(command and wait)该过程完成,通常需要15-20分钟。
NOTE: If the above command doesn't work then try on the below:
Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess
3.该过程完成后重新启动您的PC。
方法 5:启用低分辨率视频(Method 5: Enable low-resolution video)
首先(First),确保删除所有外部附件,然后从 PC 中删除任何 CD 或 DVD,然后重新启动。
2. 按住F8 键(F8 key)以调出高级启动选项屏幕。 ( advanced boot options screen. )对于Windows 10,您需要遵循本指南。
3.重新启动您的 Windows 10。
4.随着系统重新启动进入BIOS 设置(BIOS setup)并配置您的 PC 从CD/DVD启动。
5.插入Windows 10可启动安装DVD并重新启动您的 PC。
6.当提示按(Press)任意键从CD 或 DVD(CD or DVD)启动时,按任意键继续(press any key to continue)。
7.选择您的语言首选项, (language preferences, )然后单击下一步。单击左下角的修复计算机。( Click Repair)
8.在选择选项屏幕上(option screen),单击疑难解答(Troubleshoot)。
9.在疑难解答屏幕上,单击高级选项(Advanced option)。
10.在高级(Advanced)选项屏幕上,单击命令提示符(Command Prompt)。
11.当命令提示符(Command Prompt)(CMD)打开类型C:并回车。
12.现在输入以下命令:
BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY
13.然后按回车键启用旧版高级启动菜单。(Enable Legacy Advanced Boot Menu.)
14.关闭命令提示符(Command Prompt)并返回选择(Choose)一个选项屏幕(option screen),单击继续(click continue)重新启动Windows 10。
15.最后,不要忘记弹出您的Windows 10安装DVD,以获取启动选项。( Boot options.)
16. 在Advanced Boot Options屏幕上,使用箭头键突出显示Enable low-resolution video (640×480),然后按 Enter。
如果问题未出现在低分辨率模式下(low-resolution mode),则问题与Video/Display驱动程序有关。您 只需从制造商的网站下载显卡驱动程序(display card driver) 并通过安全模式安装即可(Safe Mode)修复带有光标的 Windows 10 黑屏问题(Fix Windows 10 Black Screen with Cursor issue)。
推荐的:(Recommended:)
- (Fix Video TDR Failure)修复Windows 10中的(Windows 10)视频 TDR 故障(atikmpag.sys)
- Wacom 数位板错误(Wacom Tablet Error):您的设备未连接到计算机
- 修复(Fix)您的Windows 许可证即将过期错误(Windows License Will Expire Soon Error)
- 修复(Fix Clock Watchdog Timeout Error)Windows 10上的时钟看门狗超时错误
就是这样,您已成功修复带有光标问题的 Windows 10 黑屏,(Fix Windows 10 Black Screen with Cursor Issue)但如果您对本教程仍有任何疑问,请随时在评论部分询问。
Fix Windows 10 Black Screen With Cursor [100% Working]
Fix Windows 10 Black Screen with Cursor: If you’re facing this issue where your laptop or PC screen suddenly goes black after the startup and you can’t get to the login screen then don’t worry today we are going to see how to fix this issue. When you start your PC, it normally boots and you see Windows 10 login screen, but in this case, you will see the BIOS screen with the Windows logo but after that, all you will see is a black screen with mouse cursor.
The left or right mouse click doesn’t work on the black screen, you will only able to drag the mouse pointer on the black screen which doesn’t have much use. The keyboard also doesn’t respond on the black screen, pressing Ctrl + Alt + Del or Ctrl + Shift + Esc doesn’t do anything, basically, nothing works and you are stuck on the black screen. The only thing which you can do is to force shutdown your PC and turn it off.
There is no particular cause for this issue as it can be caused by corrupted, incompatible or outdated display drivers, corrupted Windows or system files, battery residue etc. If you will try to boot into safe mode then you will get stuck again at the loading files screen and you will again see the black screen with mouse cursor. Anyway, without wasting any time let’s see How to Fix Windows 10 Black Screen with Cursor with the help of the below-listed troubleshooting guide.
Fix Windows 10 Black Screen with Cursor
Make sure to create a restore point just in case something goes wrong.
If you are able to login to Windows then try these steps:
To access Windows, you will need to restart your computer in Safe Mode with Network and then follow the below-listed methods.
Method 1: Power Reset your Laptop
The first thing you should try is removing your battery from the laptop and then unplugging all the other USB attachment, power cord etc. Once you have done that then press and hold the power button for 15 seconds and then again insert the battery and try to charge your battery again, see if you are able to Fix Windows 10 Black Screen with Cursor Issue.
Method 2: Switch Displays
1.Press Windows Key + P to open Project menu.
2.Because of the black screen, you won’t be able to see the Project menu, don’t worry that is perfectly normal.
3.You need to press up or down arrow key a few times and hit Enter.
4.If you don’t see your screen and you’re still stuck on the black screen then you may need to repeat the above steps a few times.
Note: If your Windows account is password protected then you will need to press Space bar then enter your password and hit Enter. Once done, then only you will be able to follow the above steps. This can tricky because you will be doing this on a black screen, so you may need to try a few times before you’re successful.
Method 3: Uninstall Your Graphics Card Drivers
1.In Safe Mode press Windows Key + R then type devmgmt.msc and hit enter to open Device Manager.
2.Expand Display adapter then right-click on your integrated Display adapter and select uninstall.
3.Now if you have a dedicated Graphics Card then right-click on it and select Disable.
4.Now from the Device Manager menu click Action then click Scan for hardware changes.
5.Reboot your PC and see if you are able to Fix Windows 10 Black Screen with Cursor.
Method 4: Update your Graphics Card Drivers
Manually Update Graphics Drivers using Device Manager
1.Press Windows Key + R then type devmgmt.msc and hit enter to open Device Manager.
2.Next, expand Display adapters and right-click on your Graphics Card and select Enable.
3.Once you have done this again right-click on your graphics card and select “Update Driver“.
4.Select “Search automatically for updated driver software” and let it finish the process.
5.If the above steps were helpful in fixing the issue then very good, if not then continue.
6.Again right-click on your graphics card and select “Update Driver” but this time on the next screen select “Browse my computer for driver software.“
7.Now select “Let me pick from a list of available drivers on my computer.”
8.Finally, select the latest driver from the list and click Next.
9.Let the above process finish and restart your PC to save changes.
Follow the same steps for the integrated graphics card (which is Intel in this case) to update its drivers. See if you’re able to Fix Windows 10 Black Screen with Cursor, if not then continue with the next step.
Automatically Update Graphics Drivers from Manufacturer Website
1.Press Windows Key + R and in the dialog box type “dxdiag” and hit enter.
2.After that search for the display tab (there will be two display tabs one for the integrated graphics card and another one will be of Nvidia’s) click on the display tab and find out your graphics card.
3.Now go to the Nvidia driver download website and enter the product details which we just find out.
4.Search your drivers after inputting the information, click Agree and download the drivers.
5.After successful download, install the driver and you have successfully updated your Nvidia drivers manually.
Method 5: Disable Fast Startup
1.Press Windows Key + R then type control and hit Enter to open Control Panel.
2.Click on Hardware and Sound then click on Power Options.
3.Then from the left window pane select “Choose what the power buttons do.“
4.Now click on “Change settings that are currently unavailable.“
5.Uncheck “Turn on fast startup” and click on Save changes.
After the restart see if you’re able to Fix Windows 10 Black Screen with Cursor issue, if not then continue with the next method.
Method 6: Disable Integrated Graphics Card
1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.
2.Expand Display adapters then right-click on Intel HD Graphics and select Disable.
3.Reboot your PC to save changes and see if you’re able to Fix Windows 10 Black Screen with Cursor Issue.
Method 7: Activate the built-in Windows Administrator Account
The built-in administrator account is inactive by default and has full unrestricted access to PC. Built-in Administrator Account is a local account and the main difference between this account & the administrator account of the user is that the built-in administrator account doesn’t receive UAC prompts while the other one does. The administrator account of the user is an unelevated administrator account whereas the built-in administrator account is an elevated administrator account. So without wasting any time let’s see How to Enable Built-in Administrator Account.
Method 8: Update your BIOS
Performing a BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, expert supervision is recommended.
1.The first step is to identify your BIOS version, to do so press Windows Key + R then type “msinfo32” (without quotes) and hit enter to open System Information.
2.Once the System Information window opens locate BIOS Version/Date then note down the manufacturer and BIOS version.
3.Next, go to your manufacturer’s website for e.g in my case it’s Dell so I will go to Dell website and then I will enter my computer serial number or click on the auto detect option.
4.Now from the list of drivers shown I will click on BIOS and will download the recommended update.
Note: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.
5.Once the file is downloaded, just double click on the Exe file to run it.
6.Finally, you have updated your BIOS and this may also Fix Windows 10 Black Screen with Cursor.
Method 8: Reset your PC
Note: If you can’t access your PC then restart your PC a few times until you start Automatic Repair. Then navigate to Troubleshoot > Reset this PC > Remove everything.
1.Press Windows Key + I to open Settings then click on Update & Security icon.
2.From the left-hand menu select Recovery.
3.Under Reset this PC click on the “Get Started” button.
4.Select the option to Keep my files.
5.For the next step, you might be asked to insert Windows 10 installation media.
After the reset or referesh, check if the Windows 10 Black Screen with Cursor issue is reolved or not.
Method 9: Repair Install Windows 10
This method is the last resort because if nothing works out then this method will surely repair all problems with your PC. Repair Install just uses an in-place upgrade to repair issues with the system without deleting user data present on the system. So follow this article to see How to Repair Install Windows 10 Easily.
If you are not able to login to Windows then follow these steps:
Method 1: Run Startup/Automatic Repair
1.Insert the Windows 10 bootable installation DVD and restart your PC.
2.When prompted to Press any key to boot from CD or DVD, press any key to continue.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait till the Windows Automatic/Startup Repairs complete.
8.Restart and you have successfully Fix Windows 10 Black Screen with Cursor Issue.
Also, read How to fix Automatic Repair couldn’t repair your PC.
Method 2: Run System Restore
1.Put in the Windows installation media or Recovery Drive/System Repair Disc and select your language preferences, and click Next
2.Click Repair your computer at the bottom.
3.Now choose Troubleshoot and then Advanced Options.
4..Finally, click on “System Restore” and follow onscreen instructions to complete the restore.
5.Restart your PC to save changes.
Method 3: Run SFC and CHKDSK
1.Using above method open command prompt using Windows installation disk.
2.Type the following command in cmd and hit enter after each one:
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
chkdsk C: /f /r /x
Note: Make sure you use the drive letter where Windows is currently installed. Also in the above command C: is the drive on which we want to run check disk, /f stands for a flag which chkdsk the permission to fix any errors associated with the drive, /r let chkdsk search for bad sectors and perform recovery and /x instructs the check disk to dismount the drive before beginning the process.
3.Exit the command prompt and restart your PC. This should Fix Windows 10 Black Screen with Cursor Issue but if you’re still stuck then continue with the next method.
Method 4: Run DISM
1.Again open the Command Prompt using the above method and enter the following command:
DISM /Online /Cleanup-Image /RestoreHealth
2.Press enter to run the above command and wait for the process to complete, usually, it takes 15-20 minutes.
NOTE: If the above command doesn't work then try on the below:
Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess
3.After the process is completed restart your PC.
Method 5: Enable low-resolution video
First of all, make sure to remove all external attachment then remove any CD’s or DVD’s from PC and then reboot.
2.Press and hold the F8 key in order to bring up the advanced boot options screen. For Windows 10 you need to follow this guide.
3.Restart your Windows 10.
4.As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.
5.Insert the Windows 10 bootable installation DVD and restart your PC.
6.When prompted to Press any key to boot from CD or DVD, press any key to continue.
7.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
8.On choose an option screen, click Troubleshoot.
9.On Troubleshoot screen, click Advanced option.
10.On Advanced options screen, click Command Prompt.
11.When the Command Prompt(CMD) open type C: and hit enter.
12.Now type the following command:
BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY
13.And hit enter to Enable Legacy Advanced Boot Menu.
14.Close Command Prompt and back on the Choose an option screen, click continue to restart Windows 10.
15.Finally, don’t forget to eject your Windows 10 installation DVD, in order to get Boot options.
16. On the Advanced Boot Options screen, use the arrow keys to highlight Enable low-resolution video (640×480), and then press Enter.
If the issues don’t appear in the low-resolution mode, then the issue is related to Video/Display drivers. You could Fix Windows 10 Black Screen with Cursor issue by simply downloading the display card driver from the manufacturer’s website and installing it via Safe Mode.
Recommended:
That’s it you have successfully Fix Windows 10 Black Screen with Cursor Issue but if you still have any queries regarding this tutorial then feel free to ask them in the comment’s section.