如果您尝试在Windows 10上加入或创建^{(Windows 10)}家庭组^(HomeGroup)并且弹出以下错误消息^{(error message)}“Windows 无法在此计算机上设置家庭组”，那么您来对地方了，因为今天我们将解决这个问题错误。此问题多发生在最近升级到Windows 10的系统中。

此外，其他一些用户之前已在其先前版本的Windows上创建了一个家庭组。升级到Windows 10后，不再^(HomeGroups)检测到家庭组，而是显示以下错误消息：

Windows 不再在此网络上检测到。要创建新的家庭组，请单击“确定”，然后在“控制面板”中打开“家庭组”。^{(Windows no longer detect on this network. To create a new homegroup, click OK, and then open HomeGroup in Control Panel.)}

现在即使检测到较早的家庭组^(HomeGroup)，用户也无法添加、离开或编辑。因此，不要浪费任何时间，让我们^{(time let)}看看如何在下面列出的故障排除指南的帮助下实际修复 Windows^{(Fix Windows)}无法在这台计算机上设置家庭组。

Windows 无法在此计算机上设置家庭组 [已解决]

确保^(Make)创建一个还原点^{(restore point)} 以防万一^{(case something)}出现问题。

方法 1：运行家庭组疑难解答^{(Method 1: Run HomeGroup Troubleshooter)}

1. 在 Windows 搜索中键入control，然后单击控制面板。^{( Control Panel.)}

2.在控制面板搜索^{(Control Panel search)}中键入疑难解答^{(troubleshoot)}，然后单击疑难解答。^{(Troubleshooting.)}

3. 在左侧面板中，单击查看全部。^{(View all.)}

4.从列表中单击家庭组^{(Click Homegroup)}，然后按照屏幕上的说明运行疑难解答^{(Troubleshooter)}。

5. 重新启动您的 PC 以保存更改。

方法二：手动启动Peer Networking Grouping Service^{(Method 2: Manually Start Peer Networking Grouping Service)}

1. 按 Windows 键 + R 然后键入services.msc并按 Enter。

2.现在确保以下服务配置如下：

3.为此，请一一双击上述服务，然后从启动类型^{(Startup type)}下拉菜单中选择手动。^(Manual.)

4. 现在切换到登录选项卡^{(Log On tab)}并在登录为复选标记本地系统帐户下。^{(Local System account.)}

5. 单击应用，然后单击确定。^(OK.)

6. 右键单击​​对等名称解析协议服务^{( Peer Name Resolution Protocol service)}，然后选择开始。^(Start.)

7. 启动上述服务后，再次返回查看是否能够修复 Windows 无法在此计算机上设置家庭组错误。^{( Fix Windows can’t set up a HomeGroup on this computer error.)}

8. 如果在启动Peer Name Resolution Protocol 服务^{(Peer Name Resolution Protocol service)}时遇到错误提示“ Windows 无法在本地计算机上启动 Peer Networking Grouping 服务。错误 1068：依赖服务或组无法启动。^{(Windows could not start the Peer Networking Grouping service on Local Computer. Error 1068: The dependency service or group failed to start.)}” 然后按照本指南进行操作：疑难解答无法启动对等名称解析协议服务^{(Start Peer Name Resolution Protocol Service)}

9.尝试启动PNRP 服务^{(PNRP service:)}时，您可能会收到以下错误消息：^{(error message)}

Windows could not start the Peer Name Resolution Protocol service on Local Computer.
Error 0x80630203: Unable to access a key.

The Peer Networking Grouping service depends on the Peer Name Resolution Protocol service which failed to start because of the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

Error 1068: The dependency service or group failed to start

Error 1079: the account specified for this service is different from the account specified for other services running in the same process.

10.同样，上述所有错误都可以按照^(Again)步骤 8^{(step 8)}中提到的指南进行修复。

推荐的：^{(Recommended:)}

• ^{(Fix Regedit.exe Crashes)}通过注册表搜索时^(Registry)修复 Regedit.exe 崩溃
• 修复电脑屏幕随机关闭^{(Fix Computer Screen Turns Off Randomly)}
• 如何修复右键单击在^{(Right Click)}Windows 10中不起作用
• 修复注册表编辑器^{(Registry editor)}已停止工作

就是这样，您已成功修复 Windows 无法在此计算机上设置家庭组错误^{(Fix Windows can’t set up a HomeGroup on this computer error)}，但如果您对本指南仍有任何疑问，请随时在评论部分询问他们。

Windows can't set up a HomeGroup on this computer [SOLVED]

If you are trying to join or create a HоmeGroup on Windows 10 and the following error message pops up “Windows can’t set up а homegroυp on this cоmрuter”, then you’re at the right place as today we are going to fix this error. This problem mostly oсcurѕ in the syѕtem which has been rеcently upgraded to Windows 10.

Also, some other users have previously created a homegroup on their previous version of Windows. After upgrading to Windows 10, the HomeGroups are no longer detected and instead show this error message:

Windows no longer detect on this network. To create a new homegroup, click OK, and then open HomeGroup in Control Panel.

Now even if the earlier HomeGroup is detected, the user’s can’t add, leave or edit. So without wasting any time let’s see how to actually Fix Windows can’t set up a homegroup on this computer with the help of below-listed troubleshooting guide.

Windows can’t set up a HomeGroup on this computer [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Method 1: Run HomeGroup Troubleshooter

1. Type control in Windows Search then clicks on Control Panel.

2. Type troubleshoot in the Control Panel search and then click on Troubleshooting.

3. From the left-hand panel, click on View all.

4. Click Homegroup from the list and follow the on-screen instructions to run the Troubleshooter.

5. Reboot your PC to save changes.

Method 2: Manually Start Peer Networking Grouping Service

1. Press Windows Key + R then type services.msc and hit Enter.

2. Now make sure the following services are configured as follows:

3.To do this, double-click on above services one by one and then from Startup type drop-down select Manual.

4. Now switch to Log On tab and under Log on as checkmark Local System account.

5. Click Apply, followed by OK.

6. Right-click on Peer Name Resolution Protocol service and then select Start.

7. Once the above service is started, again go back and see if you’re able to Fix Windows can’t set up a HomeGroup on this computer error.

8. If while starting Peer Name Resolution Protocol service you encountered an error saying “Windows could not start the Peer Networking Grouping service on Local Computer. Error 1068: The dependency service or group failed to start.” then follow this guide: Troubleshoot Can’t Start Peer Name Resolution Protocol Service

9. You could receive the following error message while trying to start PNRP service:

Windows could not start the Peer Name Resolution Protocol service on Local Computer.
Error 0x80630203: Unable to access a key.

The Peer Networking Grouping service depends on the Peer Name Resolution Protocol service which failed to start because of the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

Error 1068: The dependency service or group failed to start

Error 1079: the account specified for this service is different from the account specified for other services running in the same process.

10. Again, all the above error could be fixed by following the guide mentioned in step 8.

Recommended:

• Fix Regedit.exe Crashes when searching through Registry
• Fix Computer Screen Turns Off Randomly
• How To Fix Right Click Not Working in Windows 10
• Fix The Registry editor has stopped working

That’s it you have successfully Fix Windows can’t set up a HomeGroup on this computer error but if you still have any queries regarding this guide then feel free to ask them in the comment’s section.

Related posts

• [SOLVED] 100％Disk Usage System和压缩存储器

• Windows体验索引冻结[已解决]

• USB Device不在Windows 10工作[求助]

• Error 1962：未发现操作系统[已解决]

• Windows 10中的Mouse Pointer Lags [已解决]

• 启动时的Windows 10 Freezes [已解决]

• Windows 10不会记得保存的WiFi密码[已解决]

• 此计算机上缺少一个或多个网络协议[已解决]

• 默认打印机保持更改[已解决]

• Fix您的Computer是Low在内存警告[解决]

• [已解决] Windows 10中意外的商店异常BSOD

• Fix我们无法更新系统保留partition [ Solved]

• Fix Windows Could不是Complete安装[解决]

• Hmm，我们无法在Microsoft Edge中达到此page error [已解决]

• Airplane Mode未在Windows 10中关闭[已解决]

• [解决] Microsoft打印到PDF不起作用

• 您的PC未连接到Internet错误[已解决]

• 您无权保存在此位置[已解决]

• System Restore Error 0x800700B7 [解决]

• Windows 10中的Photo App Keeps Crashing [已解决]