您是否对(Are)Microsoft Edge中检测到网络更改(network change)错误感到恼火?如果是,那么您很幸运,您正在阅读这篇文章。当您的互联网连接(internet connection)不稳定、浏览器缓存(browser cache)损坏、浏览器设置不正确、存在病毒、操作系统过时、驱动程序过时、VPN/proxy设置等等时,您可能会遇到连接中断错误。(Your connection was interrupted )以下是一些故障排除方法,可帮助您修复您的连接中断Windows 10错误。你还在等什么?继续(Continue)阅读文章。
如何修复您的连接在 Windows 10 中中断(How to Fix Your connection was interrupted in Windows 10)
在本文中,我们编制了一系列方法,可帮助您修复Edge中的此错误。以相同的顺序遵循以下提到的方法以获得完美的结果。
当您没有稳定的Internet 连接(Internet connection)时,连接会不断断开。您可以运行速度测试(speed test)以了解正确连接所需的最佳网络速度水平。(network speed)
确保您的设备满足以下条件。
- 始终(Always)购买经过Internet 服务提供商 (ISP)(Internet Service Provider (ISP))验证且没有冲突的调制解调器或路由器。(modem or router)
- 不要使用旧的、破损的或损坏的电缆。(old, broken, or damaged cables.)
- 确保(Make)调制解调器到路由器和调制解调器到墙壁的电线稳定且不受干扰。必要时更换电缆。
基本故障排除方法(Basic Troubleshooting Methods)
在尝试任何高级故障排除方法之前,请尝试以下基本故障排除方法。基本且简单的故障排除方法可能有助于快速解决问题。
-
(Reload)通过同时按F5 键(F5 key)或Fn + F5 keys重新加载页面。
-
(Restart the browser)通过关闭所有浏览器窗口并打开它们来重新启动浏览器。
-
重新启动(Restart your) 系统(system),因为简单的重新启动可能有助于解决问题。
- 尝试使用不同的 Internet 浏览器(different Internet browsers),例如Google Chrome、Opera和Firefox。
方法一:重启路由器(Method 1: Restart Router)
由于此错误与网络连接有关(network connection),您可以检查连接是否稳定。可能,只需简单重启路由器即可解决Microsoft Edge 浏览器(Microsoft Edge browser)中的问题。以下是一些重启路由器设备(router device)的说明。
1. 找到路由器背面的 电源按钮(Power button) 。
2. 按一下按钮 将其关闭。(turn it off.)
3. 现在, 断开(disconnect)路由器电源线(Router power cable) 并 等待电容器完全耗尽电力。
4. 然后, 重新连接(reconnect) 电源 线(power cable) 并在一分钟后将其打开。
5.等待(Wait)网络连接(network connection)重新建立,然后 再次尝试登录(try signing in again)。
检查您是否已解决问题。
方法 2:重新连接以太网或 Wi-Fi(Method 2: Reconnect Ethernet or Wi-Fi)
这是一个非常常见的修复程序,可帮助您修复此错误。此外,请确保您的计算机连接到以太网(Ethernet)或 Wi-Fi 网络,而不是两者都连接。有线和无线连接之间的干扰会导致您的连接中断Windows 10错误。
1.断开(Disconnect)您的网络连接(network connection),等待一分钟,然后重新连接。
2. 如果以太网电缆(Ethernet cable)已插入,请将其从 PC 中移除。然后,重新连接它或将其连接到 Wi-Fi 网络。这将确保有线和无线连接之间没有闪烁。
确保您的 PC 仅连接到一个源后,重新加载网页并检查您是否已解决问题。
另请阅读:修复(Also Read:) Windows 10上的Steam 损坏磁盘错误(Fix Steam Corrupt Disk Error)
方法 3:运行网络疑难解答(Method 3: Run Network Troubleshooter)
要分析和修复所有连接问题,内置的网络故障排除(network troubleshooter)程序将为您提供帮助。所有的网络问题都将得到修复,网络操作将通过运行网络疑难解答(network troubleshooter)来即兴发挥。以下是在Windows 10 PC上运行网络疑难解答的一些说明。(network troubleshooter)
1. 同时按 Windows + I keys 启动 设置(Settings)。
2. 单击 更新和安全(Update & Security) 磁贴,如图所示。
3. 从左侧窗格转到 疑难解答 (Troubleshoot )菜单,然后在右侧窗格中找到 查找并修复其他问题(Find and fix other problems) 。
4. 选择 网络适配器(Network Adapter) 疑难解答并单击突出显示的 运行疑难解答(Run the troubleshooter) 按钮。
5. 等待故障排除程序检测并修复问题。该过程完成后,按照 屏幕上的说明(on-screen instructions) 重新 启动(restart) 您的 PC(your PC)。
Method 4: Reset TCP/IP
检测到网络更改(network change)错误指示IP 地址(IP address)发生更改。很少有用户报告您可以在重置TCP/IP configurationWindows 10错误。遵循(Follow)并实施以下说明的步骤。
1. 按 Windows 键(Windows key),键入 命令提示符(Command Prompt) 并单击 以管理员身份运行(Run as administrator)。
2.现在,键入以下命令并一一按Enter 。
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
3.等待(Wait)命令执行并重新启动您的 PC。检查您是否已解决问题。
另请阅读:(Also Read:) 如何在Windows 10中(Windows 10)修复损坏的注册表(Fix Corrupted Registry)
方法5:刷新DNS缓存(Method 5: Flush DNS Cache)
刷新DNS 缓存将从(DNS cache)缓存(cache memory)中删除所有 IP 地址和DNS记录。这将使您能够解决设备的任何安全或连接问题(security or connectivity issues)。请注意,DNS 缓存(DNS cache)会不时从设备中自动删除。无论如何,如果失败,您可以按照以下说明进行手动DNS 刷新(DNS flush)。
1.从 Windows 搜索菜单以管理员身份(Command Prompt as an administrator)启动命令提示符。
2. 现在,在命令窗口中输入ipconfig /flushdns Enter。
3.等待(Wait)命令执行并检查您是否已解决问题。
方法 6:禁用和启用网络适配器(Method 6: Disable & Enable Network Adapter)
有时,网络适配器中的一个小故障可能会导致此错误。要完全解决它,您可以调整网络适配器设置。按照下面列出的说明禁用网络适配器(Network Adapter)并稍后重新启用它。
1. 点击Windows 键(Windows key )并输入设备管理器(Device Manager),点击打开(Open)。
2. 现在,通过双击展开网络适配器部分。(Network adapters )
3. 然后,右键单击您的网络驱动程序(Network driver )(例如,Intel (R) Dual Band Wireless-AC 3168)并选择禁用设备(Disable device )选项,如图所示。
4. 然后,点击Yes确认(Yes)以下提示(below prompt)。
5. 现在,屏幕刷新。稍等片刻或重新启动计算机。再次(Again),右键单击您的驱动程序并选择启用设备(Enable device )选项,如图所示。
最后,检查您是否已修复Windows 10(Windows 10) PC中的连接中断错误。
另请阅读:(Also Read:) 如何修复错误 0x80070002 (Fix Error 0x80070002) Windows 10
方法 7:删除 WLAN 配置文件(Method 7: Delete WLAN Profiles)
每次连接到无线网络(wireless network)时,都会创建WLAN配置文件。(WLAN)这些配置文件包含将您的 PC 连接到网络所需的网络名称、密钥和其他相关设置。按照下面提到的步骤从您的计算机中删除WLAN配置文件。(WLAN)
1. 同时按下 Windows + R keys 打开 设置(Settings)。
2. 单击 网络和 Internet(Network & Internet) 设置。
3. 现在,单击左侧窗格中的 Wi-Fi 菜单。
4. 然后,向下滚动,单击 管理已知网络(Manage known networks) 选项。
5.屏幕上将显示您之前成功配对的无线网络列表。(wireless network)单击(Click)任何似乎不必要的 无线网络,然后选择(wireless network)忘记 (Forget )选项。
现在,WLAN 配置文件(WLAN profile)将从您的系统中删除。接下来,连接到网页(web page)并检查您是否再次遇到错误。
方法 8:禁用电源管理(Method 8: Disable Power Management)
当您的设备启用省电模式(power saver mode)时,网络适配器将自动关闭,从而导致此错误。考虑按照以下步骤更改省电模式。(Power Saving mode)
1.通过在搜索菜单(search menu)中键入设备管理器并打开最佳结果来打开设备管理器。(Device Manager )
2. 现在,通过双击展开网络适配器部分。(Network adapters )
3. 然后,右键单击网络适配器(Network adapter )并选择属性(Properties )选项,如图所示。
4. 在“属性”窗口(Properties window)中,切换到“电源管理(Power Management )”窗口并取消选中“允许计算机关闭此设备以节省电源(Allow the computer to turn off this device to save power )”选项,如图所示。
5. 最后,点击OK保存更改。
检查您是否已解决问题。
另请阅读:(Also Read:) 如何在Windows 10中(Windows 10)删除 Win 安装文件(Delete Win Setup Files)
方法 9:禁用 IPV6(Method 9: Disable IPV6)
如果您的计算机无论如何都不支持IPv6 ,那么您肯定会面临您的连接被中断的(IPv6)Windows 10错误。您可以按照以下步骤在您的计算机上禁用IPv6 。
1. 同时按下Windows + R keys 运行对话框(Run dialog box )。
2. 现在,输入ncpa.cpl并按Enter 键(Enter key)。
3. 现在,右键单击您的活动网络适配器,然后单击属性(network adapter and click on Properties),如图所示。
4. 现在,将弹出Wi-Fi 属性窗口。(Wi-Fi Properties window)现在,取消选中Internet Protocol Version 6(TCP/IPv6) 选项,如下所示。
5. 最后,点击OK保存更改。
注意:(Note: )如果您使用多个网络连接,请导航至Network and Sharing Center > Change adapter settings。现在右键单击适配器并选择禁用(Disable)选项。同样(Likewise),禁用除您正在使用的连接之外的所有其他连接。
检查您是否已解决问题。
方法10:切换到谷歌DNS(Method 10: Switch to Google DNS)
很少有不兼容的DNS设置会降低计算机速度,从而导致此错误。此方法不会以任何方式损害您的 PC。因此(Hence),值得尝试修复所讨论的错误。一些用户报告说,可以按照以下步骤解决此问题。
1. 同时按下Windows + R keys 运行对话框(Run dialog box )。
2. 现在,输入ncpa.cpl并按Enter 键(Enter key)。
3. 现在,右键单击您的活动网络适配器(network adapter),然后单击属性(click on Properties ),如图所示。
4. 现在,将弹出Wi-Fi 属性窗口。(Wi-Fi Properties window)单击(Click)Internet Protocol Version 4(TCP/IPv4) ,然后单击属性。(Properties.)
注意:(Note:)您也可以双击Internet Protocol Version 4(TCP/IPv4)打开“属性(Properties)”窗口。
5. 选择使用以下 DNS 服务器地址(Use the following DNS server addresses)。然后,输入以下值:
- 首选 DNS 服务器:8.8.8.8
- 备用 DNS 服务器:8.8.4.4
6. 接下来,选择Validate settings on exit(Validate settings upon exit)并单击OK。
7.关闭窗口,此方法将修复检测到错误的网络更改(network change)。
另请阅读:(Also Read:)在Windows 10上修复 iaStorA.sys (Fix iaStorA.sys)BSOD 错误(BSOD Error)的 7种方法(Ways)
方法 11:修改 LAN 设置(Method 11: Modify LAN Settings)
一些常见的Internet 连接(internet connectivity)问题可能会导致Microsoft Edge 浏览器(Microsoft Edge browser)中的连接中断错误。您可以通过重置本地网络设置来修复它们,如下所述。
1. 按 Windows 键(Windows key),键入 控制面板(Control Panel) 并单击 打开(Open)。
2. 现在,将 View by 选项设置为 Category。
3. 选择 网络和互联网 (Network and Internet )设置。
4. 在这里,单击 Internet 选项 (Internet Options ),如下所示。
5. 现在,在 Internet 属性(Internet Properties) 窗口中,切换到 连接 (Connections )选项卡。
6. 选择 LAN 设置(LAN settings),如下所示。
7. 在这里,选中 自动检测设置 (Automatically detect settings )框并确保 未选中为您的 LAN 使用代理服务器 (Use a proxy server for your LAN )框。
注意:(Note:) 您可以在需要时再次启用该选项。
8. 最后,点击 OK 保存更改。
另请阅读:(Also Read:) 修复 .NET 运行时优化服务高 CPU 使用率(Fix .NET Runtime Optimization Service High CPU Usage)
方法12:端口转发(Method 12: Port Forwarding)
如果路由器的DHCP端口有问题,您将面临几个问题并遵循端口转发技术来解决您的连接在Windows 10中中断。
注意:(Note: )端口转发和 DHCP 设置(Port forwarding and DHCP settings)会因路由器制造商和型号(router manufacturer and model)而异。
1. 按 Windows 键并键入 cmd。单击 以管理员身份运行(Run as administrator) 以启动 命令提示符(Command Prompt)。
2. 现在,输入 ipconfig /all 并按 Enter,如图所示。
3. 记下 Default Gateway、 Subnet Mask、 MAC和 DNS 的值。(DNS.)
4. 要打开 运行(Run) 对话框,请按 Windows + R 键。
5. 输入 ncpa.cpl(ncpa.cpl) 并点击 OK。
6. 右键单击您的 网络连接(network connection) ,然后单击“ 属性(Properties)”,如突出显示的那样。
7. 在这里,选择 Internet Protocol Version 4(TCP/IPv4) 并单击 属性。(Properties.)
8. 选择图标 使用以下 DNS 服务器地址。(Use the following DNS server addresses.)
9. 然后,输入下面给出的值:
- 首选 DNS 服务器:8.8.8.8(Preferred DNS server: 8.8.8.8)
- 备用 DNS 服务器:8.8.4.4(Alternate DNS server: 8.8.4.4)
10.接下来,检查 退出时验证设置(Validate settings upon exit) 选项,然后单击 确定(OK)。
11. 启动您的 网络浏览器(web browser) 并输入 您的(your) IP 地址 (IP address )以打开路由器设置。
12. 输入您的 登录凭据。(login credentials.)
13. 导航到 基本配置( Basic Config) 下的 启用手动分配( Enable Manual Assignment),然后单击 是。(Yes.)
14. 现在,在DCHP设置中,输入您的 Mac 地址和 IP 地址(Mac address and IP address),以及 DNS 服务器 (DNS servers ),然后单击 保存(Save)。
15. 单击 端口转发,然后在(Port Forwarding)开始(Start) 和 结束(End) 字段下键入以下要打开的端口范围 :
TCP: 27015-27030, 27036-27037
UDP: 4380, 27000-27031, 27036
16. 现在,输入 您创建 的静态 IP 地址 并选中(Static IP address )启用 (Enable )选项。
17. 最后,点击 保存 (Save )或 应用 (Apply )按钮保存更改并重新启动路由器和 PC(reboot your Router and PC)。
方法 13:联系互联网服务提供商(Method 13: Contact Internet Service Provider)
如果全部失败,则这表明存在后端故障。立即(Immediately)就该问题联系您的互联网服务提供商。(Internet Service Provider)如果您当前的套餐速度较慢,您可以将您的Internet 套餐更改为更快的速度。(Internet package)
推荐的:(Recommended:)
- 修复 Snapchat 不会加载故事
- 修复(Fix)Windows 10更新错误 0x80070103(Update Error 0x80070103)
- 修复(Fix)Windows 10中的句柄(Handle)无效(Invalid Error)错误
- 修复谷歌浏览器状态断点错误(Fix Google Chrome STATUS BREAKPOINT Error)
我们希望本指南对您有所帮助,您可以修复Windows 10中(Windows 10)的连接中断(your connection was interrupted)错误。让我们知道哪种方法最适合您。此外,如果您对本文有任何疑问/建议,请随时将它们放在评论部分。
Fix Your connection was interrupted in Windows 10
Are you annoyed wіth a network change was detected error in Microsoft Edgе? If yes, you are lucky enough that you are readіng this article. Υoυ may face Your connection was interrupted error when you have an unstable internet connection, corrupt browser cache, incorrect browser settings, presence of a virus, outdated OS, outdated drivers, VPN/proxy settings, and a lot more. Here are a few troubleshooting methods that will help you fix Your connection was interrupted Windows 10 error. So, what are you waiting for? Continue reading the article.
How to Fix Your connection was interrupted in Windows 10
In this article, we have compiled a list of methods that will help you fix this error in Edge. Follow the below-mentioned methods in the same order to attain perfect results.
The connection keeps on disconnecting when you do not have a stable Internet connection. You can run a speed test to know the optimum level of network speed required for the proper connection.
Ensure that your device satisfies the below criteria.
- Always buy a modem or router verified from your Internet Service Provider (ISP) and free of conflicts.
- Do not use old, broken, or damaged cables.
- Make sure the wires from the modem to the router and the modem to the wall are stable and out of disturbance. Replace the cables if necessary.
Basic Troubleshooting Methods
Before trying any advanced troubleshooting methods, try the following basic troubleshooting methods. A basic and easy troubleshooting method may help in resolving the issue quickly.
-
Reload the page by pressing the F5 key or Fn + F5 keys together.
-
Restart the browser by closing all the browser windows and opening them.
-
Restart your system because a simple restarting might help in fixing the issue.
- Try using different Internet browsers such as Google Chrome, Opera, and Firefox.
Method 1: Restart Router
Since this error was related to the network connection, you can check if the connection is stable or not. Possibly, a simple restart of the router will fix the problems in the Microsoft Edge browser. Here are a few instructions to restart your router device.
1. Find the Power button at the back of your router.
2. Press the button once to turn it off.
3. Now, disconnect your Router power cable and wait until the power is entirely drained from the capacitors.
4. Then, reconnect the power cable and switch it on after a minute.
5. Wait until the network connection is re-established and try signing in again.
Check if you have fixed the issue.
Method 2: Reconnect Ethernet or Wi-Fi
This is a very common fix that will help you fix this error. Also, ensure that your computer is either connected to Ethernet or a Wi-Fi network and not both. Interference between wired and wireless connections will cause your connection to be interrupted Windows 10 error.
1. Disconnect your network connection, wait for a minute and reconnect it again.
2. If the Ethernet cable is plugged in, remove it from your PC. Then, reconnect it or connect it to a Wi-Fi network. This will ensure there is no flickering between the wired and wireless connections.
Once you have ensured that your PC is connected to only one source, reload the web pages and check if you have fixed the issue.
Also Read: Fix Steam Corrupt Disk Error on Windows 10
Method 3: Run Network Troubleshooter
To analyze and fix all the connection problems, the in-built network troubleshooter will help you. All the network problems will be fixed, and the network operations will be improvised by running a network troubleshooter. Here are a few instructions to run the network troubleshooter on Windows 10 PC.
1. Press Windows + I keys simultaneously to launch Settings.
2. Click on the Update & Security tile, as shown.
3. Go to Troubleshoot menu from the left pane and locate Find and fix other problems in right pane.
4. Select Network Adapter troubleshooter and click on Run the troubleshooter button shown highlighted.
5. Wait for the troubleshooter to detect and fix the problem. Once the process is complete, follow on-screen instructions and restart your PC.
Method 4: Reset TCP/IP
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 error when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Hit the Windows key, type Command Prompt and click on Run as administrator.
2. Now, type the following commands and hit Enter one by one.
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
3. Wait for the commands to be executed and reboot your PC. Check if you have fixed the issue.
Also Read: How to Fix Corrupted Registry in Windows 10
Method 5: Flush DNS Cache
Flushing the DNS cache will remove all the IP addresses and DNS records from the cache memory. This will enable you to resolve any security or connectivity issues with your device. Note that the DNS cache will be automatically removed from the device from time to time. By any chance, if this fails, you can do a manual DNS flush as instructed below.
1. Launch Command Prompt as an administrator from Windows search menu.
2. Now, type ipconfig /flushdns in the command window and hit Enter.
3. Wait for the command to be executed and check if you have fixed the issue.
Method 6: Disable & Enable Network Adapter
Sometimes, a minor temporary glitch in your network adapters can cause this error. To resolve it completely, you can tweak network adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Hit the Windows key and type Device Manager, click on Open.
2. Now, expand the Network adapters section by double-clicking on it.
3. Then, right-click on your Network driver (for example, Intel (R) Dual Band Wireless-AC 3168) and select the Disable device option as shown.
4. Then, confirm the below prompt by clicking on Yes.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, right-click on your driver and select the Enable device option as shown.
Finally, check if you have fixed your connection was interrupted error in Windows 10 PC.
Also Read: How to Fix Error 0x80070002 Windows 10
Method 7: Delete WLAN Profiles
Every time you connect to a wireless network, WLAN profiles will be created. These profiles contain network names, keys, and other related settings that are necessary to connect your PC to a network. Follow the below-mentioned steps to remove WLAN profiles from your computer.
1. Hit the Windows + R keys simultaneously to open Settings.
2. Click on the Network & Internet setting.
3. Now, click on the Wi-Fi menu from the left pane.
4. Then, scroll down, click on the Manage known networks option.
5. Here a list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network that seems unnecessary and select the Forget option.
Now, the WLAN profile will be removed from your system. Next, connect to the web page and check if you face the error again.
Method 8: Disable Power Management
When the power saver mode is enabled in your device, the network adapters will automatically shut down, leading to this error. Consider changing the Power Saving mode by following the below-mentioned steps.
1. Open Device Manager by typing it in the search menu and opening the best results.
2. Now, expand the Network adapters section by double-clicking on it.
3. Then, right-click on the Network adapter and select the Properties option as shown.
4. In the Properties window, switch to the Power Management window and uncheck the option Allow the computer to turn off this device to save power as shown.
5. Finally, click on OK to save the changes.
Check if you have fixed the issue.
Also Read: How to Delete Win Setup Files in Windows 10
Method 9: Disable IPV6
If your computer does not support IPv6 in any case, then you will definitely face your connection was interrupted Windows 10 error. You can follow the below-mentioned steps to disable IPv6 on your computer.
1. Launch the Run dialog box by pressing Windows + R keys together.
2. Now, type ncpa.cpl and hit Enter key.
3. Now, right-click on your active network adapter and click on Properties as shown.
4. Now, the Wi-Fi Properties window will pop up. Now, uncheck the Internet Protocol Version 6(TCP/IPv6) option as shown below.
5. Finally, click on OK to save the changes.
Note: If you use multiple network connections, navigate to Network and Sharing Center > Change adapter settings. Now right-click on the adapter and select the Disable option. Likewise, disable all the additional connections except the one you are using.
Check if you have fixed the issue.
Method 10: Switch to Google DNS
Few incompatible DNS settings will slow down the computer, thereby leading to this error. This method will not harm your PC in any way. Hence, it is worth trying to fix the discussed error. Several users have reported that this problem can be fixed by following the below-mentioned steps.
1. Open the Run dialog box by pressing Windows + R keys together.
2. Now, type ncpa.cpl and hit Enter key.
3. Now, right-click on your active network adapter and click on Properties as shown.
4. Now, the Wi-Fi Properties window will pop up. Click on Internet Protocol Version 4(TCP/IPv4) and click on Properties.
Note: You can also double-click on Internet Protocol Version 4(TCP/IPv4) to open the Properties window.
5. Select Use the following DNS server addresses. Then, enter the below-mentioned values:
- Preferred DNS server: 8.8.8.8
- Alternate DNS server: 8.8.4.4
6. Next, select Validate settings upon exit and click on OK.
7. Close the window, and this method will fix a network change that was detected error.
Also Read: 7 Ways to Fix iaStorA.sys BSOD Error on Windows 10
Method 11: Modify LAN Settings
A few common internet connectivity issues may lead to your connection being interrupted error in the Microsoft Edge browser. You can fix them by resetting local network settings, as discussed below.
1. Press the Windows key, type Control Panel and click on Open.
2. Now, set the View by option to Category.
3. Select the Network and Internet settings.
4. Here, click on Internet Options as shown below.
5. Now, in the Internet Properties window, switch to the Connections tab.
6. Select LAN settings, as highlighted below.
7. Here, check the box Automatically detect settings and ensure Use a proxy server for your LAN box is unchecked.
Note: You can enable the option again when you need it.
8. Finally, click on OK to save the changes.
Also Read: Fix .NET Runtime Optimization Service High CPU Usage
Method 12: Port Forwarding
If the router has an issue with the DHCP ports, you will face several problems and follow port forwarding techniques to solve your connection was interrupted in Windows 10.
Note: Port forwarding and DHCP settings will vary according to the router manufacturer and model.
1. Press the Windows key and type cmd. Click on Run as administrator to launch Command Prompt.
2. Now, type ipconfig /all and hit Enter, as shown.
3. Note down the values of Default Gateway, Subnet Mask, MAC, and DNS.
4. To open the Run dialog box, press the Windows +R key.
5. Type ncpa.cpl and click OK.
6. Right-click on your network connection and click on Properties, as highlighted.
7. Here, select Internet Protocol Version 4(TCP/IPv4) and click on Properties.
8. Select the icon Use the following DNS server addresses.
9. Then, enter the values given below:
- Preferred DNS server: 8.8.8.8
- Alternate DNS server: 8.8.4.4
10. Next, check the Validate settings upon exit option and click on OK.
11. Launch your web browser and type your IP address to open router settings.
12. Enter your login credentials.
13. Navigate to Enable Manual Assignment under Basic Config, and click on Yes.
14. Now, in the DCHP settings, enter your Mac address and IP address, and DNS servers and click on Save.
15. Click on Port Forwarding, and type the following range of ports to open under Start and End fields:
TCP: 27015-27030, 27036-27037
UDP: 4380, 27000-27031, 27036
16. Now, type the Static IP address you have created and check Enable option.
17. Finally, click on Save or Apply button to save the changes and reboot your Router and PC.
Method 13: Contact Internet Service Provider
If all fails, then this indicates that there is a backend failure. Immediately contact your Internet Service Provider regarding the issue. You may change your Internet package to a faster speed if your current package is slow.
Recommended:
We hope that this guide was helpful and you could fix your connection was interrupted error in Windows 10. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.