此错误意味着 Windows 找不到用于启动的系统文件，这^{(System Files)}表明启动配置数据 (BCD) 已损坏^{(indicates boot configuration data (BCD) is corrupted)}。这也可能是因为系统文件已损坏；磁盘文件系统^{(Disk File System)}配置错误，硬件故障^{(Hardware fault)}等。由于错误代码 0xc0000225^{(error code 0xc0000225)}只是伴随着“发生意外错误^{(An unexpected error has occurred)}”，它没有提供任何信息，但在进行故障排除时，我们发现上述问题是导致此问题的主要原因。

用户报告在更新Windows 10或更新^{(Windows 10)}Windows的关键组件时遇到此错误。并且计算机突然重新启动（或者可能是停电^{(power outage)}），您只剩下此错误代码 0xc0000225^{(error code 0xc0000225)}和无法启动的 PC。但别担心，这就是我们在这里解决此问题的原因，所以不要浪费任何时间，让我们^{(time let)}看看如何解决此错误。

^{(Fix Error Code 0xc0000225)}修复Windows 10 中的错误代码 0xc0000225

方法1：Run Automatic/Startup Repair

1. 插入Windows 10可启动安装DVD并重新启动您的 PC。

2. 当提示Press any key to boot from CD or DVD时，按任意键继续。

3. 选择您的语言首选项，然后单击下一步^(Next)。单击左下角的修复计算机。^{(Click Repair)}

4. 在选择选项屏幕上^{(option screen)}，单击疑难解答^{(Troubleshoot)}。

5. 在疑难解答屏幕上^{(Troubleshoot screen)}，单击高级选项^{(Advanced option)}。

6. 在高级^(Advanced)选项屏幕上，单击自动修复或启动修复^{(Automatic Repair or Startup Repair)}。

7. 等到Windows Automatic/Startup Repairs完成。

8.重新启动^(Restart)，您已成功 修复Windows 10中的错误代码0xc0000225，^{( Fix Error Code 0xc0000225 in Windows 10,)} 如果没有，请继续。

另请阅读：如何修复自动修复无法修复您的 PC。^{(How to fix Automatic Repair couldn’t repair your PC.)}

方法 2：修复引导扇区或重建 BCD^{(Boot sector or Rebuild BCD)}

1.使用上述方法使用Windows安装盘打开命令提示符。^{(open command prompt)}

2.现在一一键入以下命令，并在每个命令后按回车键：

bootrec.exe /FixMbr
bootrec.exe /FixBoot
bootrec.exe /RebuildBcd

3.如果上述命令失败，则在cmd中输入以下命令：

bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd

4. 最后，退出 cmd 并重新启动Windows。

5. 此方法似乎可以修复Windows 10中的^{(Windows 10)}错误代码 0xc0000225^{(Fix Error Code 0xc0000225)}，但如果它对您不起作用^{(t work)}，请继续。

方法 3：使用Diskpart将分区标记^{(Mark partition)}为活动

1.再次^(Again)转到命令提示符并键入^{(Command Prompt and type)}：diskpart

2. 现在在Diskpart中输入这些命令：（不要输入DISKPART）

DISKPART> select disk 1
DISKPART> select partition 1
DISKPART> active
DISKPART> exit

注意：^(Note:)始终将系统保留分区^{(System Reserved Partition)}（通常为 100MB）标记为活动分区，如果您没有系统保留分区^{(System Reserved Partition)}，请将 C: Drive 标记为活动分区。

3.重新启动^(Restart)以应用更改并查看该方法是否有效。

方法四：恢复 MBR

1.再次^(Again)使用方法1^{(method 1)}进入命令提示符，在高级选项屏幕^{(Advanced options screen)}中单击命令提示符^{(command prompt)}。

2. 在cmd 中输入^{(cmd and hit enter)}以下命令并在每个命令后按回车键：

bootsect /ntfs60 C:

3.上述过程完成后，重新启动您的PC。

方法 5：运行 CHKDSK 和 SFC

1.再次^(Again)使用方法1^{(method 1)}进入命令提示符，在高级选项屏幕^{(Advanced options screen)}中单击命令提示符^{(command prompt)}。

2. 在cmd 中输入^{(cmd and hit enter)}以下命令并在每个命令后按回车键：

sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
chkdsk c: /r

注意：确保^{(Make sure)}使用当前安装Windows的^(Windows)驱动器^{(drive letter)}号

3. 退出命令提示符^{(command prompt)}并重新启动 PC。

方法6：修复安装Windows

这种方法是最后的手段，因为如果没有任何效果，那么这种方法肯定会修复您 PC 的所有问题。修复^{(Repair Install)}使用就地升级来修复系统问题而不删除系统上存在的用户数据进行安装。因此，请按照本文查看如何轻松^(Easily)修复^(How)安装Windows 10^{(Repair Install Windows 10)} 。在这种情况下，您可以尝试修复Windows，但如果这也失败了，那么剩下的唯一解决方案就是安装一个新的Windows副本（全新安装^{(Clean Install)}）。

就是这样，您已成功修复 Windows 10 中的错误代码 0xc0000225，^{(Fix Error Code 0xc0000225 in Windows 10)}但如果您对本指南仍有任何疑问，请随时在评论部分询问。

Fix Error Code 0xc0000225 in Windows 10

This error means Windowѕ cannot find the System Filеs used for booting, which indicates boot configuration data (BCD) is corrupted. This can also be because of the system files being corrupt; Disk File System has a bad configuration, Hardware fault etc. As the error code 0xc0000225 is just accompanied with “An unexpected error has occurred” which gives no information but while troubleshooting we have found above issues to be the main cause of this problem.

Users have reported encountering this error while updating Windows 10 or updating critical component of Windows. And the computer abruptly restarted (or it can be power outage) and all you are is left with this error code 0xc0000225 and a PC that won’t boot. But don’t worry that’s why we are here to troubleshoot this issue, so without wasting any time let’s see how to fix this error.

Fix Error Code 0xc0000225 in Windows 10

Method 1: Run Automatic/Startup Repair

1. Insert the Windows 10 bootable installation DVD and restart your PC.

2. When prompted to Press any key to boot from CD or DVD, press any key to continue.

3. Select your language preferences, and click Next. Click Repair your computer in the bottom-left.

4. On choose an option screen, click Troubleshoot.

5. On Troubleshoot screen, click the Advanced option.

6. On the Advanced options screen, click Automatic Repair or Startup Repair.

7. Wait till the Windows Automatic/Startup Repairs complete.

8. Restart and you have successfully Fix Error Code 0xc0000225 in Windows 10, if not, continue.

Also Read: How to fix Automatic Repair couldn’t repair your PC.

Method 2: Repair your Boot sector or Rebuild BCD

1. Using above method open command prompt using Windows installation disk.

2. Now type the following commands one by one and hit enter after each one:

bootrec.exe /FixMbr
bootrec.exe /FixBoot
bootrec.exe /RebuildBcd

3. If the above command fails then enter the following commands in cmd:

bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd

4. Finally, exit the cmd and restart your Windows.

5. This method seems to Fix Error Code 0xc0000225 in Windows 10 but if it doesn’t work for you then continue.

Method 3: Mark partition as active using Diskpart

1. Again go to Command Prompt and type: diskpart

2. Now type these commands in Diskpart: (don’t type DISKPART)

DISKPART> select disk 1
DISKPART> select partition 1
DISKPART> active
DISKPART> exit

Note: Always mark the System Reserved Partition (generally 100MB) active and if you don’t have a System Reserved Partition, mark C: Drive as the active partition.

3. Restart to apply changes and see if the method worked.

Method 4: Restore the MBR

1. Again go to command prompt using the method 1, click on command prompt in the Advanced options screen.

2. Type the following command in cmd and hit enter after each one:

bootsect /ntfs60 C:

3. After the above process is finished, restart your PC.

Method 5: Run CHKDSK and SFC

1. Again go to command prompt using the method 1, click on command prompt in the Advanced options screen.

2. Type the following command in cmd and hit enter after each one:

sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
chkdsk c: /r

Note: Make sure you use the drive letter where Windows is currently installed

3. Exit the command prompt and restart your PC.

Method 6: Repair install Windows

This method is the last resort because if nothing works out, then, this method will surely repair all problems with your PC. Repair Install using an in-place upgrade to repair issues with the system without deleting user data present on the system. So follow this article to see How to Repair Install Windows 10 Easily. In this case, you can try to repair Windows, but if this also fails, then the only solution left is to install a new copy of Windows (Clean Install).

That’s it, you have successfully Fix Error Code 0xc0000225 in Windows 10 but if you still have any queries regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Fix Windows Update Error Code 0x80072efe

• Device Manager中的Fix Network Adapter Error Code 31

• Fix Unable安装Network Adapter Error Code 28

• Fix Windows Store Error Code 0x803F8001

• Fix Office Activation Error Code 0xC004F074

• 如何Fix Application Error 0xc000007b

• Fix Windows Update Error 0x80070020

• Fix Steam Application Load Error 3:0000065432

• Fix Windows Update Error 0x800704c7

• 修复 Windows 10 中的 Steam 错误代码 e502 l3

• 如何Fix Application Load Error 5:0000065434

• Fix USB不工作Error Code 39

• Fix MHW Error Code 50382-MW1

• Fix U-Verse Modem Gateway Authentication Failure Error

• 修复 Windows 11 中的错误代码 0x8007007f

• 如何Fix Google Drive Access Denied Error

• Fix Minecraft Error未能Write Core Dump

• 修复 Square Enix 错误代码 i2501

• Fix Error Code 0x80004005：Windows 10中未指定的错误

• Fix Error 651：调制解调器（或其他连接设备）报告了错误