如果您还面临Logitech鼠标双击问题,那么您来对地方了。罗技配件和外围设备(Logitech accessories and peripherals) (如键盘、鼠标、扬声器等)以具有成本效益的最佳质量而闻名。罗技产品设计精良,(well-engineered)配备高质量的硬件和软件,而且价格实惠(yet, quite affordable)。不幸的是,设备在使用几年后确实会遇到一些故障或损坏。罗技(Logitech)鼠标双击问题就是其中之一。罗技(Logitech)鼠标用户也抱怨这些问题:
- 当您单击鼠标一次(click your mouse once)时,它会导致双击( results in a double click)。
- 您拖动的文件或文件夹可能会在(get dropped)中途被丢弃。
- 通常,点击不会被注册(clicks do not get registered)。
Logitech(新旧)鼠标和Microsoft鼠标都报告了双击问题。阅读本指南以修复Windows 10 PC中的罗技(Logitech)鼠标双击问题。
如何修复罗技鼠标双击问题(How to Fix Logitech Mouse Double Click Problem)
罗技(Logitech)鼠标双击问题背后有几个原因,例如:
-
硬件问题:(Hardware Problems: )有时,硬件问题或物理损坏可能会自动触发双击,即使您只单击一次。它还可能强制滚动(Scroll)按钮跳转,而不是滚动。与电脑端口的连接松动也会影响鼠标的正常工作。
-
不正确的鼠标设置:(Incorrect Mouse Settings: )Windows PC中(Windows PC)不正确(Improper)的鼠标设置会导致双击问题。
-
电荷累积:(Charge Accumulation: )如果您长时间使用罗技(Logitech)鼠标,一段时间后,鼠标中的电荷会累积,导致罗技(Logitech)鼠标双击问题。为避免这种情况,请在工作数小时之间让鼠标休息几分钟,以释放鼠标中积累的所有静电荷。
-
鼠标弹簧问题:(Problem with Mouse Spring: )长时间使用后,鼠标内部的弹簧可能会松动,导致鼠标滚动(Mouse Scroll)和单击(Click)按钮出现问题。阅读方法 6(Read Method 6)以了解如何更换弹簧。
-
过时的设备驱动程序:(Outdated Device Drivers: )系统上安装的设备驱动程序如果不兼容,可能会触发Logitech鼠标双击问题。您可以通过将驱动程序更新到最新版本来快速解决此问题。虽然,这可能会阻止在您的系统中启动Logitech 软件(Logitech software )。
初步故障排除
(Preliminary Troubleshooting
)
在进行严重的故障排除之前,您应该执行以下几项检查:
1. 检查您的罗技鼠标是否物理损坏(physically damaged) 或损坏(or broken)。
2.验证产品是否仍在保修期内(under warranty),您可以要求更换。
3. 尝试将鼠标插入不同的端口(different port)。
4. 将不同的鼠标(different mouse)连接到您的计算机并检查它是否工作。
5.另外,将鼠标连接到另一台计算机(another computer)并检查问题是否仍然存在。如果鼠标功能正常,您应该检查 Windows PC 中的鼠标设置。
方法一:调整鼠标设置(Method 1: Adjust Mouse Settings)
当设备设置不正确时,可能会出现罗技(Logitech)鼠标双击问题。下面列出了在Windows 10中更正鼠标设置的选项。
选项 1:使用鼠标属性
(Option 1: Using Mouse Properties
)
1.在Windows 搜索(Windows search)栏中键入控制面板(Control Panel),然后从此处启动控制面板。(Control Panel )
2. 将查看方式(View by )选项设置为大图标。(Large icons. )
3. 然后,点击鼠标(Mouse),如下图所示。
4. 在鼠标属性窗口的(Mouse Properties)按钮(Buttons )选项卡下,拖动滑块将速度(Speed)设置为慢(Slow)。
5. 最后,单击Apply > OK. 这些步骤将降低双击速度并解决问题。
选项 2:使用文件资源管理器选项
(Option 2: Using File Explorer Options
)
1. 在搜索栏中键入并单击(single click),如图所示。
2. 打开指定单击或双击(Specify single- or double-click to open )从右窗格打开。
3. 在常规(General )选项卡中,转到单击项目如下(Click items as follows )部分。
4.在这里,选择双击打开一个项目(单击选择)(Double-click to open an item (single-click to select) )选项,如突出显示。
5. 最后,单击Apply > OK并重新启动您的 PC(restart your PC)以实施这些更改。
方法 2:释放静电荷(Method 2: Discharge the Static Charge)
如前所述,当长时间使用鼠标时,静电荷会累积在鼠标中。建议让鼠标( allow the mouse to rest)在两者之间休息几分钟。或者,您可以尝试以下释放累积费用来修复罗技(Logitech)鼠标双击问题:
1.使用切换按钮(Toggle button)关闭(Turn OFF)Logitech 鼠标,如下图所示。
2. 现在,从中取出电池。(remove the batteries )
3.以交替方式连续按下鼠标按钮一分钟。(Press the mouse buttons)
4.将电池(Insert the batteries)小心插入鼠标,检查问题是否解决。
另请阅读:(Also Read: )如何修复 iCUE 未检测到设备(How to Fix iCUE Not Detecting Devices)
方法 3:重新安装鼠标驱动程序(Method 3: Reinstall Mouse Drivers)
系统上安装的设备驱动程序如果不兼容,可能会触发Logitech鼠标双击问题。您可以通过将鼠标驱动程序更新到最新版本来快速解决此问题。您可以通过两种方式做到这一点。
方法 3A:通过罗技网站(Method 3A: Through Logitech website)
1.访问罗技官网(Logitech official website)。
2.在您的PC上找到(Find)并下载与(Download)Windows版本相对应的驱动程序。
3. 双击下载的文件(downloaded file)并按照说明进行安装(install)。
方法 3B:通过设备管理器(Method 3B: Through Device Manager)
1.通过在Windows 搜索(Windows Search)栏中搜索来打开设备管理器。(Device Manager)
2. 双击展开鼠标和其他指针设备(Mice and other pointing devices )选项。
3. 找到您的Logitech 鼠标(HID 兼容鼠标)(Logitech mouse (HID compliant mouse))并右键单击它。在这里,点击卸载设备(Uninstall device),如下图所示。
4.从计算机上拔下(Unplug)鼠标,取出电池(remove the batteries)并等待(wait)几分钟。
5.重新启动您的系统(Restart your system)。
6.让Windows自动下载和更新(download & update)相应的驱动程序。
这应该可以解决罗技(Logitech)鼠标双击问题。如果没有,请尝试下一个解决方案。
另请阅读:(Also Read:) 500 卢比以下的 10 款最佳鼠标。在印度(10 Best Mouse Under 500 Rs. in India)
方法四:重置罗技无线鼠标(Method 4: Reset Logitech Wireless Mouse)
阅读我们关于修复 Logitech Wireless Mouse Not Working(Fix Logitech Wireless Mouse Not Working)的指南,以解决与Logitech Wireless Mouse相关的所有问题。重置它将刷新无线连接,并可能修复罗技(Logitech)鼠标双击问题。
方法 5:提出保修索赔(Method 5: File a Warranty Claim)
如果您的设备在保修(Warranty)期内,请通过访问罗技(Logitech)官网并报告罗技(Logitech)鼠标双击问题提出保修索赔。
1.在任何网络浏览器(web browser)中打开给定的链接(given link)。
2.使用正确的序列号或使用产品类别和子类别来识别您的产品。(Identify your product)
3. 描述问题并登记您的投诉。(register your complaint. )等待您的投诉得到确认(acknowledgment)。
4. 确认您的罗技(Logitech)鼠标是否符合更换或维修的条件,然后进行相应操作。
方法6:手动修理或更换弹簧(Method 6: Repair or Replace the Spring Manually)
当您无法为您的鼠标申请保修并且存在弹簧问题时,可以修复它。每次单击鼠标时,弹簧都会被按下和释放。如果弹簧断裂或损坏,可能会导致罗技(Logitech)鼠标双击问题或单击未注册问题。
注意:必须(Note:)非常小心谨慎(extreme care and caution)地执行以下步骤。修复时的一个小错误可能会使您的罗技(Logitech)鼠标完全无用。因此(Hence),请自行承担风险。
1. 取下罗技鼠标的上机身保护盖(body cover)。
2. 找到鼠标底部四个角的螺丝。( the screws )然后,小心地从上面拧下(unscrew )机身。
注意:(Note:) 确保(Make)在卸下螺钉时不要干扰内部电路。
3.在您的鼠标中找到点击机制。(click mechanism )您将在点击机制的顶部看到一个白色按钮。(White button )
注意:(Note:)在处理咔嗒装置时要轻柔,因为它可能会脱落。
4. 现在,使用平头螺丝刀提起并取下点击机构的黑色外壳(black case)。
5.接下来,负责罗技(Logitech)鼠标双击问题的弹簧将在点击机制的顶部可见。(spring)将弹簧放在地板上并用手指握住它。
6. 如果您的弹簧不在正确的曲线上,请使用螺丝刀弯曲弹簧(bend the spring ),直到建立正确的曲线。
7. 一旦弹簧重组(restructured)为适当的弯曲形状。
8. 将弹簧放在闩锁上,就像使用小钩子之前一样。
9. 利用弹簧后端的空间将其放置在卡扣机构上。
10. 在这一步中,重新组装(reassemble )点击机构。将白色按钮放在点击机制的顶部。
11.在打包鼠标组件之前做一个点击测试。(Do a click test)
12. 最后将罗技鼠标的机身盖放好(place the body cover),用螺丝固定(fix it with screws)。
这种方法很耗时,需要很大的耐心。此外,它需要小心处理以避免设备故障。因此(Hence),不建议这样做。您可以联系技术人员来解决此问题。
受到推崇的:(Recommended:)
我们希望本指南对您有所帮助,并且您能够修复 Windows PC 上的罗技鼠标双击问题( fix Logitech mouse double click problem on Windows PC)。让我们知道哪种方法最适合您。另外,如果您对本文有任何疑问或建议,请随时将它们放在评论部分。
Fix Logitech Mouse Double Click Problem
If you аre also facing a Logitech mouse double-clicking issue, then yоu are at the right place. Logitech accessories and peripherals like keyboards, mouse, speakers, and many more, are known for optimal quality at cost-effective prices. Logitech products are well-engineered with high-quality hardware and software yet, quite affordable. Unfortunately, devices do encounter some faults or damage after few years of use. The Logitech mouse double click problem being one of them. Logitech mouse users complained of these issues as well:
- When you click your mouse once, it results in a double click instead.
- The files or folders you drag may get dropped midway.
- Often, clicks do not get registered.
The double-clicking issue was reported in both, Logitech (new and old) mouse and Microsoft mouse. Read this guide to fix Logitech mouse double click problem in Windows 10 PC.
How to Fix Logitech Mouse Double Click Problem
There are several reasons behind the Logitech mouse double click problem, such as:
-
Hardware Problems: Sometimes, hardware problems or physical damage might trigger a double-click automatically, even when you click only once. It might also force the Scroll button to jump, rather than scroll. A loose connection with the computer port will also affect the normal functioning of the mouse.
-
Incorrect Mouse Settings: Improper mouse settings in Windows PC will cause a double-click problem.
-
Charge Accumulation: If you use a Logitech mouse for a prolonged period of time, at a stretch, then the charge present in the mouse gets accumulated resulting in Logitech mouse double click problem. To avoid this, rest your mouse for few minutes in between several hours of work to discharge all static charges accumulated in the mouse.
-
Problem with Mouse Spring: After long usage, the spring inside the mouse might get loose and cause issues with the Mouse Scroll and the Click buttons. Read Method 6 to learn how to replace the spring.
-
Outdated Device Drivers: The device drivers installed on your system, if incompatible, might trigger the Logitech mouse double-click problem issue. You can quickly fix this problem by updating your driver to the latest version. Although, this might prevent the launch of Logitech software in your system.
Preliminary Troubleshooting
Here are few checks you should perform before proceeding to serious troubleshooting:
1. Check if your Logitech mouse is physically damaged or broken.
2. Verify if the product is still under warranty as you can claim for replacement.
3. Try plugging the mouse in a different port.
4. Connect a different mouse to your computer and check if it works.
5. Also, connect the mouse to another computer and check if the issue still exists. If the mouse functions properly, you should check mouse settings in your Windows PC.
Method 1: Adjust Mouse Settings
When the device settings are not set correctly, the Logitech mouse double-clicking issue might occur. Listed below are the options to correct mouse settings in Windows 10.
Option 1: Using Mouse Properties
1. Type Control Panel in the Windows search bar and launch Control Panel from here.
2. Set the View by option to Large icons.
3. Then, click on Mouse, as depicted below.
4. Under the Buttons tab in Mouse Properties window, drag the slider to set the Speed to Slow.
5. Lastly, click on Apply > OK. These steps will reduce the double-clicking speed and solve the issue.
Option 2: Using File Explorer Options
1. Type and search single click in the search bar, as shown.
2. Open Specify single- or double-click to open from the right pane.
3. In the General tab, go to the Click items as follows section.
4. Here, select Double-click to open an item (single-click to select) option, as highlighted.
5. Finally, click on Apply > OK and restart your PC to implement these changes.
Method 2: Discharge the Static Charge
As discussed earlier, the static charge gets accumulated in the mouse when used for an extended period of time. It’s advisable to allow the mouse to rest in between, for a few minutes. Alternately, you can try the following to release accumulated charges to fix Logitech mouse double click problem:
1. Turn OFF the Logitech mouse by using the Toggle button as depicted in the below picture.
2. Now, remove the batteries from it.
3. Press the mouse buttons in an alternate manner, continuously, for a minute.
4. Insert the batteries into the mouse carefully and check if the issue is resolved.
Also Read: How to Fix iCUE Not Detecting Devices
Method 3: Reinstall Mouse Drivers
The device drivers installed on your system, if incompatible, might trigger a Logitech mouse double-click problem. You can quickly fix this problem by updating the mouse driver to its latest version. You can do so in two ways.
Method 3A: Through Logitech website
1. Visit the Logitech official website.
2. Find and Download the drivers corresponding to the version of Windows on your PC.
3. Double click on the downloaded file and follow the instructions to install it.
Method 3B: Through Device Manager
1. Open Device Manager by searching for it in the Windows Search bar.
2. Double-click to expand Mice and other pointing devices option.
3. Locate your Logitech mouse (HID compliant mouse) and right-click on it. Here, click on Uninstall device, as illustrated below.
4. Unplug the mouse from the computer, remove the batteries and wait for few minutes.
5. Restart your system.
6. Let Windows download & update the corresponding drivers automatically.
This should fix Logitech mouse double click problem. If not, try the next solution.
Also Read: 10 Best Mouse Under 500 Rs. in India
Method 4: Reset Logitech Wireless Mouse
Read our guide on Fix Logitech Wireless Mouse Not Working to resolve all issues associated with Logitech Wireless Mouse. Resetting it will refresh the wireless connection and potentially, fix Logitech mouse double click problem.
Method 5: File a Warranty Claim
If your device is covered under the Warranty period, file a warranty claim by visiting Logitech’s official website and reporting the Logitech mouse double-clicking issue.
1. Open the given link in any web browser.
2. Identify your product with the correct serial number or using product category and subcategory.
3. Describe the problem and register your complaint. Wait for acknowledgment of your complaint.
4. Confirm if your Logitech mouse is eligible for replacement or repair and proceed accordingly.
Method 6: Repair or Replace the Spring Manually
When you cannot claim a warranty for your mouse and there’s a spring issue, it can be fixed. Every time you click the mouse, the spring is pressed and released. If the spring is either broken or damaged, it might cause Logitech mouse double click problem or click not registered issues.
Note: The below-mentioned steps must be implemented with extreme care and caution. A small mistake while repairing it might render your Logitech mouse completely useless. Hence, proceed at your own risk.
1. Remove the upper protective body cover of the Logitech mouse.
2. Locate the screws from the four corners of the underside of the mouse. Then, carefully unscrew the body from it.
Note: Make sure to not disturb the internal circuitry when you remove the screws.
3. Find the click mechanism in your mouse. You will see a White button on the top of the click mechanism.
Note: Be gentle while handling the click mechanism as it may fall off.
4. Now, lift and remove the black case of the click mechanism using a flat head screwdriver.
5. Next, the spring responsible for the Logitech mouse double click problem will be visible on top of the click mechanism. Place the spring on the floor and hold it with your fingers.
6. If your spring is not in the proper curve, use a screwdriver and bend the spring until a proper curve is established.
7. Once the spring is restructured to its proper curved shape.
8. Place the spring on the latch as it was before using a small hook.
9. Use the space at the rear end of the spring to place it on the click mechanism.
10. In this step, reassemble the click mechanism. Place the white button on top of the click mechanism.
11. Do a click test before packing up the mouse components.
12. Finally, place the body cover of the Logitech mouse and fix it with screws.
This method is time-consuming and requires a lot of patience. In addition, it requires careful handling to avoid device failure. Hence, it is not advisable. You can contact a technician to solve this issue.
Recommended:
We hope that this guide was helpful, and you were able to fix Logitech mouse double click problem on Windows PC. Let us know which method worked for you best. Also, if you have any queries or suggestions regarding this article, then feel free to drop them in the comments section.