如何创建系统还原点：^{(How to create a system restore point: )}在创建系统还原点之前，让我们看看它的全部内容。 系统还原^{(System restore)}可帮助您将计算机状态（包括系统文件、已安装的应用程序、Windows注册表和设置）恢复到系统正常工作的早期状态，以便从故障或其他问题中恢复系统。

有时，已安装的程序或驱动程序会给您的系统带来意外错误或导致 Windows 出现不可预测的行为。通常卸载程序或驱动程序有助于解决问题，但如果这不能解决问题，那么您可以尝试将系统恢复到一切正常的较早日期。

系统还原^(Restore)使用称为系统保护^{(system protection)(system protection)}的功能定期在您的计算机上创建和保存还原点。这些还原点包含有关注册表设置的信息和 Windows 使用的其他系统信息。在本 Windows 10 指南中，您将了解如何创建系统还原点^{( create a system restore point)}以及将计算机还原到此系统还原点的步骤^{(steps to restore your computer to this system restore point)}，以防您在 Windows 10 计算机上遇到任何问题。

如何在Windows 10中创建^{(Windows 10)}系统还原点^{(System Restore Point)}

在您可以在Windows 10^{(Windows 10)}中创建系统还原点之前，您需要启用系统还原^{(System Restore)}，因为它默认未启用。

在 Windows 10 中启用系统还原^{(Enable System Restore in Windows 10)}

1. 在Windows搜索中键入“创建还原点”，然后单击顶部结果以打开“系统属性^{(System Properties)}”窗口。

2. 在系统保护^{(System Protection)}选项卡下，选择C: 驱动器^{(C: drive)}（默认安装Windows）并单击配置^(Configure)按钮。

3.勾选恢复设置下的系统保护^{(Turn on system protection)}，并选择磁盘使用下的最大使用，然后单击确定。^{(Max usage)}

4. 接下来，单击应用^(Apply)，然后单击确定以保存更改。

在 Windows 10 中创建系统还原点^{(Create System Restore Point in Windows 10)}

1.在 Windows 搜索中输入还原点^{(restore point)}，然后从搜索结果中单击“创建还原点”。^{(Create a restore point)}

2. 在系统保护选项卡下，^{(System Protection tab,)}单击创建^(Create) 按钮。

3. 输入还原点的名称，^{(name of the restore point)}然后单击创建^(Create)。

注意：^(Note:) 确保^(Make)使用描述性名称，因为如果您有太多还原点，则很难记住哪个还原点是出于什么目的而创建的。

4.稍后将创建一个还原点。^(Restore)

5. 完成后，单击 关闭^(Close)按钮。

如果将来您的系统遇到任何您无法修复的问题或错误，那么您可以将系统还原到此还原点^{(restore your system to this Restore point)}，所有更改都将还原到此点。

另请阅读：^{(Also Read:)} 如何在 Windows 10 中修复损坏的系统文件^{(How to Repair Corrupted System Files in Windows 10)}

如何执行系统还原^{(How to Perform System Restore)}

现在，一旦您创建了系统还原点或系统中已经存在系统还原点，您就可以使用还原点轻松地将 PC 还原到旧配置。

要在Windows 10上使用^{(Windows 10)}系统还原^{(System Restore )}，请按照以下步骤操作：

1. 在开始菜单搜索类型控制面板^{(Control Panel)}。在搜索结果中单击^(Click)控制面板以将其打开。^{(Control Panel)}

2. 在控制面板^{(Control panel)}下点击系统和安全选项。^{(System and Security option.)}

3.接下来，单击系统^(System)选项。

4. 单击系统^(System)窗口左上角菜单中的系统保护。^{(System Protection )}

5. 系统属性窗口将打开。在“保护设置”^{(Protection Settings)}选项卡下，单击“系统还原”^{(System Restore)} 按钮。

6.会弹出系统还原窗口，点击^{(System Restore)}下一步^(Next)。

7.系统还原点列表将出现^{(List of System Restore points will appear)}。选择要用于 PC的系统还原点，然后单击^{(System Restore)}下一步。^(Next.)

8. 将出现一个确认对话框^{(confirmation dialogue box)}。最后，点击完成。^(Finish.)

9.当消息提示为 –一旦启动，系统还原不能被中断^{(Once Started, System Restore cannot be interrupted.)}时，单击是。^(Yes)

一段时间后，该过程将完成。请记住^(Remember)，一旦系统还原^{(System Restore)}过程您将无法停止，并且需要一些时间才能完成，因此请不要惊慌或尝试强行取消该过程。还原完成后，系统还原^{(System Restore)}将使您的计算机恢复到一切正常的早期状态。

你可能也会喜欢：

• 如何修复 0xc000007b 应用程序错误
• 如何修复 Windows 10 中的图标缓存^{(How to Repair Icon Cache in Windows 10)}
• 如何修复 MMC 无法创建管理单元^{(How To Fix MMC Could Not Create The Snap-in)}
• 如何修复 COM 代理已停止工作^{(How to fix COM Surrogate has stopped working)}

希望^(Hopefully)使用上述方法之一，您将能够在 Windows 10 上创建系统还原^{(create a System Restore on Windows 10)}。但是，如果您对本文仍有任何疑问或疑问，请随时在评论部分提出。

How to Create a System Restore Point in Windows 10

How to create a system restore point: Before creating the system restore point let’s see what it’s all about. System restore helps you revert back your computer state (including system files, installed applications, Windows registry, and settings) to that of an earlier time where your system was working properly in order to recover the system from malfunctions or other problems.

Sometimes, the installed program or a driver creates an unexpected error to your system or causes Windows to behave unpredictably. Usually uninstalling the program or driver helps in fixing the problem but if that doesn’t fix the issue then you can try restoring your system to an earlier date when everything worked correctly.

System Restore uses a feature called system protection to regularly create and save restore points on your computer. These restore points contain information about registry settings and other system information that Windows uses. In this Windows 10 guide, you will learn how to create a system restore point as well as the steps to restore your computer to this system restore point in case you’re facing any issues with your Windows 10 computer.

How to Create a System Restore Point in Windows 10

Before you can create a system restore point in Windows 10, you need to enable System Restore as it is not enabled by default.

Enable System Restore in Windows 10

1. In the Windows search type “Create a restore point” then click on the top result to open the System Properties window.

2. Under the System Protection tab, select C: drive (where Windows is installed by default) and click on the Configure button.

3. Checkmark Turn on system protection under restore settings and select the Max usage under disk usage then click OK.

4. Next, click Apply followed by OK to save changes.

Create System Restore Point in Windows 10

1. Type restore point in Windows Search then click on “Create a restore point” from the search result.

2. Under the System Protection tab, click on the Create button.

3. Enter the name of the restore point and click Create.

Note: Make sure you use a descriptive name because if you have too many restore points it will be difficult to remember which one was created for what purpose.

4. A Restore point will be created in a few moments.

5. One done, click the Close button.

If in the future, your system faces any problem or error which you aren’t able to fix then you can restore your system to this Restore point and all the changes will be reverted back to this point.

Also Read: How to Repair Corrupted System Files in Windows 10

How to Perform System Restore

Now once you have created a system restore point or a system restore point already exists in your system, you can easily restore your PC to the old configuration using the restore points.

To use System Restore on Windows 10, follow the below steps:

1. In the Start Menu search type Control Panel. Click on the Control Panel from the search result to open it.

2. Under Control panel click on System and Security option.

3. Next, click on the System option.

4. Click on System Protection from the top left-hand side menu of the System window.

5. The system property window will open. Under the Protection Settings tab, click the System Restore button.

6. A System Restore window will pop up, click Next.

7. List of System Restore points will appear. Choose the System Restore point that you want to use for your PC then click Next.

8. A confirmation dialogue box will appear. Finally, click on Finish.

9. Click on Yes when a message Prompts as – Once Started, System Restore cannot be interrupted.

After some time the process will complete. Remember, once the System Restore process you cannot stop it and it will take some time to complete so don’t panic or don’t try to forcefully cancel the process. Once the restore complete, System Restore will return your computer to an earlier state where everything worked as expected.

You may also like:

• How to fix 0xc000007b Application Error
• How to Repair Icon Cache in Windows 10
• How To Fix MMC Could Not Create The Snap-in
• How to fix COM Surrogate has stopped working

Hopefully, using one of the above methods you will be able to create a System Restore on Windows 10. But if you still have any doubt or question regarding this article then feel free to ask them in the comment section.

Related posts

• 如何在Windows 10中从System Restore Point中恢复文件

• 如何在Windows 10中Manually Create A System Restore Point

• System Restore在Windows 10中的Delete System Image Restore Point

• 在Windows 10中创建Full System Image Backup [终极指南]

• 如何在Windows 10中创建System Image Backup

• Windows 10 Timeline轻松View Chrome Activity

• Windows 10中Fix Unable至Delete Temporary Files

• 如何禁用Windows 10 Firewall

• 如何在Windows 10中启用或Disable Emoji Panel

• Windows 10 User Find Security Identifier（SID）

• Windows 10采用Encrypting File System（EFS）Encrypt Files and Folders

• SysRestore是Windows 10的免费替代System Restore software

• Rstrui.exe在Windows 10中不工作或认可

• Windows 10中的Fix Task Host Window Prevents Shut Down

• 如何在Windows 10上运行JAR Files

• 如何完全从Windows 10卸载McAfee

• USB Device不在Windows 10工作[求助]

• 3 Ways在Windows 10中杀死A Process

• 如何在Windows 10中删除Volume or Drive Partition

• Fix System图标未显示在Windows 10任务栏上