当Internet连接出现问题时，通常会出现错误代码 0x80072efd 。^{(Error Code 0x80072efd)}由于多种原因，可能会出现互联网连接丢失或访问受限网络问题。^(Loss)但是当用户尝试访问Windows 10应用商店^(Store)或Windows 更新^{(Windows Update)}时，此错误 0x80072efd 将表明无法访问Windows 应用商店^{(Windows Store)}或Windows 更新^{(Windows Update)}。互联网连接受限的几个常见原因是代理配置、防火墙、防病毒等不正确。所以不要浪费任何时间，让我们看看如何实际修复^(Fix)Windows 10商店错误代码 0x80072efd^{(Store Error Code 0x80072efd)} 在下面列出的指南的帮助下。

修复^(Fix)Windows 10商店错误代码 0x80072efd^{(Store Error Code 0x80072efd)}

确保 创建一个还原点^{(create a restore point)}，以防万一出现问题。

方法一：取消勾选代理^{(Method 1: Uncheck Proxy)}

1. 按Windows Key + R然后键入“ inetcpl.cpl ”并按回车键打开Internet 属性。^{(Internet Properties.)}

2. 接下来，转到连接选项卡^{(Connections tab)}，然后单击LAN 设置。^{(LAN settings.)}

3.取消选中为您的LAN使用^{(Uncheck Use)}代理服务器^{(Proxy Server)}并确保选中“自动检测设置^{(Automatically detect settings)}”。

4. 单击确定^(OK)，然后单击应用并重新启动您的 PC。

方法 2：清除 Windows 存储缓存^{(Method 2: Clear Windows Store Cache)}

1. 按Windows Key + R然后输入“ wsreset.exe ”并回车。

2. 运行上述命令，这将重置您的Windows Store缓存。

3. 完成后重新启动 PC 以保存更改。查看您是否能够修复 Windows 10 商店错误代码 0x80072efd。^{(Fix Windows 10 Store Error Code 0x80072efd.)}

方法 3：暂时禁用防病毒和防火墙^{(Method 3: Temporarily Disable Antivirus and Firewall)}

有时，防病毒^(Antivirus)程序可能会导致 Chrome 上出现 Aw Snap 错误 ^{(Aw Snap error on Chrome )}，要验证此处不是这种情况，您需要在有限的时间内禁用防病毒软件，以便在防病毒软件关闭时检查错误是否仍然出现。

1. 右键单击​​系统托盘中的 防病毒程序图标^{( Antivirus Program icon)} 并选择 禁用。^(Disable.)

2. 接下来，选择 防病毒软件将保持禁用的时间范围。^{( Antivirus will remain disabled.)}

注意：选择尽可能短的时间，例如 15 分钟或 30 分钟。

3. 完成后，再次尝试连接以打开Google Chrome并检查错误是否解决。

4. 从开始菜单^{(Start Menu)}搜索栏搜索控制面板，点击打开 控制面板。^{( Control Panel.)}

5. 接下来，单击 系统和安全，^{( System and Security)} 然后单击 Windows 防火墙。^{(Windows Firewall.)}

6. 现在从左侧窗格中单击 打开或关闭 Windows 防火墙。^{( Turn Windows Firewall on or off.)}

7. 选择关闭 Windows 防火墙并重新启动您的 PC。^{(Select Turn off Windows Firewall and restart your PC.)}

再次尝试打开Google Chrome并访问之前显示^{(Google Chrome)}Aw Snap 错误 ^{(Aw Snap error. )}的网页。如果上述方法不起作用，请按照相同的步骤重新 打开您的防火墙。^{( turn on your Firewall again.)}

Method 4: Flush DNS and Reset TCP/IP

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2. 现在输入以下命令并在每个命令后按Enter ：

ipconfig /release
ipconfig /flushdns
ipconfig /renew

3.再次^(Again)，打开Admin Command Prompt并键入以下内容，然后在每个之后按回车：

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

4. 重新启动以应用更改。刷新DNS似乎可以修复 Windows 10 商店错误代码 0x80072efd。^{(Fix Windows 10 Store Error Code 0x80072efd.)}

方法 5：重命名 SoftwareDistribution 文件夹^{(Method 5: Rename SoftwareDistribution Folder)}

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2. 现在键入以下命令以停止Windows 更新^{(Windows Update)} 服务^(Services)，然后在每个命令后按 Enter ：^(Enter)

网络停止 wuauserv
网络停止 cryptSvc
网络停止位
网络停止 msiserver

3. 接下来，键入以下命令以重命名SoftwareDistribution 文件夹^{(SoftwareDistribution Folder)}，然后按 Enter^(Enter)：

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

4. 最后，键入以下命令以启动Windows 更新^{(Windows Update)} 服务^(Services)并在每个命令后按 Enter ：^(Enter)

网络启动 wuauserv^{(net start wuauserv)}
网络启动 cryptSvc^{(net start cryptSvc)}
网络启动位^{(net start bits)}
网络启动 msiserver^{(net start msiserver)}

5. 重新启动您的 PC 以保存更改并检查您是否可以 修复 Windows 10 商店错误代码 0x80072efd。^{( Fix Windows 10 Store Error Code 0x80072efd.)}

方法 6：运行 Windows 应用商店疑难解答^{(Method 6: Run Windows Store Troubleshooter)}

1. 转到他的链接并下载^{(his link and download)} Windows Store Apps Troubleshooter。

2. 双击下载文件运行疑难解答^{(Troubleshooter)}。

3. 确保点击高级^(Advanced)并勾选“自动应用修复。^{(Apply repair automatically.)}”

4. 让疑难解答程序运行并修复 Windows 10 商店错误代码 0x80072efd。^{(Fix Windows 10 Store Error Code 0x80072efd.)}

5. 打开控制面板，在右上角的搜索栏中搜索^{(Search Bar)}疑难解答，然后点击^{(Troubleshooting)}疑难解答^{(Troubleshooting)}。

6. 接下来，从左侧窗口的窗格中选择查看全部。^{(View all.)}

7. 然后，从解决^{(Troubleshoot)}计算机问题列表中选择Windows 应用商店应用程序。^{(Windows Store Apps.)}

8. 按照屏幕上的说明运行Windows 更新疑难解答^{(Windows Update Troubleshoot)}。

9. 重新启动您的 PC 以保存更改。

方法 7：重置 Windows 更新组件^{(Method 7: Reset Windows Update Component)}

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2. 在 cmd 中输入^(Enter)以下命令并在每个命令后按 Enter：

净停止位
净停止 wuauserv
净停止 appidsvc
净停止 cryptsvc

3. 删除 qmgr*.dat 文件，再次打开 cmd 并键入：

Del “%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat”

4. 在 cmd 中输入以下内容并按Enter：

cd /d %windir%\system32

5.重新注册 BITS 文件和 Windows Update 文件^{(Reregister the BITS files and the Windows Update files)}。在 cmd 中分别键入^(Type)以下每个命令，并在每个命令后按 Enter ：^(Enter)

regsvr32.exe atl.dll
regsvr32.exe urlmon.dll
regsvr32.exe mshtml.dll
regsvr32.exe shdocvw.dll
regsvr32.exe browseui.dll
regsvr32.exe jscript.dll
regsvr32.exe vbscript.dll
regsvr32.exe scrrun.dll
regsvr32.exe msxml.dll
regsvr32.exe msxml3.dll
regsvr32.exe msxml6.dll
regsvr32.exe actxprxy.dll
regsvr32.exe softpub.dll
regsvr32.exe wintrust.dll
regsvr32.exe dssenh.dll
regsvr32.exe rsaenh.dll
regsvr32.exe gpkcsp.dll
regsvr32.exe sccbase.dll
regsvr32.exe slbcsp.dll
regsvr32.exe cryptdlg.dll
regsvr32.exe oleaut32.dll
regsvr32.exe ole32.dll
regsvr32.exe shell32.dll
regsvr32.exe initpki.dll
regsvr32.exe wuapi.dll
regsvr32.exe wuaueng.dll
regsvr32.exe wuaueng1.dll
regsvr32.exe wucltui.dll
regsvr32.exe wups.dll
regsvr32.exe wups2.dll
regsvr32.exe wuweb.dll
regsvr32.exe qmgr.dll
regsvr32.exe qmgrprxy.dll
regsvr32.exe wucltux.dll
regsvr32.exe muweb.dll
regsvr32.exe wuwebv.dll

6. 重置 Winsock：

netsh winsock 重置^{(netsh winsock reset)}

7. 将BITS服务和Windows Update服务重置为默认安全描述符：

sc.exe sdset 位 D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)^{(sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU))}

sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

8.再次^(Again)启动Windows更新服务：

网络开始位^{(net start bits)}
网络开始 wuauserv^{(net start wuauserv)}
网络开始 appidsvc^{(net start appidsvc)}
网络开始 cryptsvc^{(net start cryptsvc)}

9. 安装最新的Windows 更新代理。^{(Windows Update Agent.)}

10. 重新启动您的 PC 以保存更改。

受到推崇的：^{(Recommended:)}

• 修复 Windows 10 随机崩溃^{(Fix Windows 10 Crashing Randomly)}
• 修复驱动器在双击时无法打开^{(Fix Drives does not open on double click)}
• 如何修复无法打开本地磁盘 (C:)^{(How to Fix Unable to Open Local Disk (C:))}
• 修复 Windows 10 在启动时冻结^{(Fix Windows 10 Freezes on Startup)}

就是这样，您已成功修复 Windows 10 商店错误代码 0x80072efd^{(Fix Windows 10 Store Error Code 0x80072efd)}，但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

Fix Windows 10 Store Error Code 0x80072efd

The Error Code 0x80072efd generally occurs whеn there is ѕome problem with an Internet connection. Loss of intеrnet connectivity or limited access network problem can occur due to аny number of reasons. But when the υser tries tо access Windows 10 Store or Windоws Update, this error 0x80072еfd will state that the Windows Store or Windows Update is not accessible. Few common reasonѕ for limited internet connection are incorrect proxy сonfiguration, firеwall, antivirus etc. So without wasting any time let’s see how tо actυally Fix Windows 10 Store Error Code 0x80072efd with the help of the below-listed guide.

Fix Windows 10 Store Error Code 0x80072efd

Make sure to create a restore point, just in case something goes wrong.

Method 1: Uncheck Proxy

1. Press Windows Key + R then type “inetcpl.cpl” and hit enter to open Internet Properties.

2. Next, Go to Connections tab and then click on LAN settings.

3. Uncheck Use a Proxy Server for your LAN and make sure “Automatically detect settings” is checked.

4. Click OK then Apply and reboot your PC.

Method 2: Clear Windows Store Cache

1. Press Windows Key + R then type “wsreset.exe” and hit enter.

2. Let the above command run which will reset your Windows Store cache.

3. When this is done restart your PC to save changes. See if you’re able to Fix Windows 10 Store Error Code 0x80072efd.

Method 3: Temporarily Disable Antivirus and Firewall

Sometimes the Antivirus program can cause Aw Snap error on Chrome and to verify this is not the case here, you need to disable your antivirus for a limited time so that you can check if the error still appears when the antivirus is off.

1. Right-click on the Antivirus Program icon from the system tray and select Disable.

2.  Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible, for example, 15 minutes or 30 minutes.

3. Once done, again try to connect to open Google Chrome and check if the error resolves or not.

4. Search for the control panel from the Start Menu search bar and click on it to open the Control Panel.

5. Next, click on System and Security then click on Windows Firewall.

6. Now from the left window pane click on Turn Windows Firewall on or off.

7. Select Turn off Windows Firewall and restart your PC.

Again try to open Google Chrome and visit the web page, which was earlier showing the Aw Snap error. If the above method doesn’t work, please follow the same steps to turn on your Firewall again.

Method 4: Flush DNS and Reset TCP/IP

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Now type the following command and press Enter after each one:

ipconfig /release
ipconfig /flushdns
ipconfig /renew

3. Again, open Admin Command Prompt and type the following and hit enter after each one:

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

4. Reboot to apply changes. Flushing DNS seems to Fix Windows 10 Store Error Code 0x80072efd.

Method 5: Rename SoftwareDistribution Folder

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Now type the following commands to stop Windows Update Services and then hit Enter after each one:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

3. Next, type the following command to rename SoftwareDistribution Folder and then hit Enter:

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

4. Finally, type the following command to start Windows Update Services and hit Enter after each one:

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

5. Reboot your PC to save changes and check if you can Fix Windows 10 Store Error Code 0x80072efd.

Method 6: Run Windows Store Troubleshooter

1. Go to this link and download Windows Store Apps Troubleshooter.

2. Double-click the download file to run the Troubleshooter.

3. Make sure to click on Advanced and checkmark “Apply repair automatically.”

4. Let the Troubleshooter run and Fix Windows 10 Store Error Code 0x80072efd.

5. Open control panel and search Troubleshooting in the Search Bar on the top right side and click on Troubleshooting.

6. Next, from the left window, pane select View all.

7. Then, from the Troubleshoot computer problems list select Windows Store Apps.

8. Follow on-screen instruction and let the Windows Update Troubleshoot run.

9. Restart your PC to save changes.

Method 7: Reset Windows Update Component

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Type the following command into cmd and hit Enter after each one:

net stop bits
net stop wuauserv
net stop appidsvc
net stop cryptsvc

3. Delete the qmgr*.dat files, to do this again open cmd and type:

Del “%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat”

4. Type the following into cmd and hit Enter:

cd /d %windir%\system32

5. Reregister the BITS files and the Windows Update files. Type each of the following commands individually in cmd and hit Enter after each one:

regsvr32.exe atl.dll
regsvr32.exe urlmon.dll
regsvr32.exe mshtml.dll
regsvr32.exe shdocvw.dll
regsvr32.exe browseui.dll
regsvr32.exe jscript.dll
regsvr32.exe vbscript.dll
regsvr32.exe scrrun.dll
regsvr32.exe msxml.dll
regsvr32.exe msxml3.dll
regsvr32.exe msxml6.dll
regsvr32.exe actxprxy.dll
regsvr32.exe softpub.dll
regsvr32.exe wintrust.dll
regsvr32.exe dssenh.dll
regsvr32.exe rsaenh.dll
regsvr32.exe gpkcsp.dll
regsvr32.exe sccbase.dll
regsvr32.exe slbcsp.dll
regsvr32.exe cryptdlg.dll
regsvr32.exe oleaut32.dll
regsvr32.exe ole32.dll
regsvr32.exe shell32.dll
regsvr32.exe initpki.dll
regsvr32.exe wuapi.dll
regsvr32.exe wuaueng.dll
regsvr32.exe wuaueng1.dll
regsvr32.exe wucltui.dll
regsvr32.exe wups.dll
regsvr32.exe wups2.dll
regsvr32.exe wuweb.dll
regsvr32.exe qmgr.dll
regsvr32.exe qmgrprxy.dll
regsvr32.exe wucltux.dll
regsvr32.exe muweb.dll
regsvr32.exe wuwebv.dll

6. To reset Winsock:

netsh winsock reset

7. Reset the BITS service and the Windows Update service to the default security descriptor:

sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

8. Again start the Windows update services:

net start bits
net start wuauserv
net start appidsvc
net start cryptsvc

9. Install the latest Windows Update Agent.

10. Reboot your PC to save changes.

Recommended:

• Fix Windows 10 Crashing Randomly
• Fix Drives does not open on double click
• How to Fix Unable to Open Local Disk (C:)
• Fix Windows 10 Freezes on Startup

That’s it, you have successfully Fix Windows 10 Store Error Code 0x80072efd but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• Fix Windows Store Error Code 0x803F8001

• Fix Windows Store Error Code 0x80240437

• Fix Windows Update Error Code 0x80072efe

• Device Manager中的Fix Network Adapter Error Code 31

• Fix Unable安装Network Adapter Error Code 28

• 如何Fix Application Error 523

• 修复 Square Enix 错误代码 i2501

• 修复 Zoom 无法连接错误代码 5003

• Fix PNP Detected Fatal Error Windows 10

• Fix Developer Mode package无法安装Error code 0x80004005

• 修复 Windows 应用商店错误 0x80072ee7

• 如何Fix Application Load Error 5:0000065434

• 修复 Windows 11 中的错误代码 0x8007007f

• Fix Error 651：调制解调器（或其他连接设备）报告了错误

• Fix Error Code 0x8007000D尝试激活Windows时

• Fix Windows Store Cache May Be损坏Error

• 如何修复 Netflix 错误代码 M7111-1101

• 修复 Windows 10 中的 Microsoft Store 错误 0x80073D12

• 修复无法在 Google Play 商店安装应用程序错误代码 910

• 如何Fix Application Error 0xc0000005