修复 MSCONFIG 不会在 Windows 10 上保存更改： ^{(Fix MSCONFIG Won’t Save Changes on Windows 10: )}如果您无法在MSCONFIG中保存任何设置，则这意味着您的MSCONFIG由于权限问题而无法保存更改。虽然问题的根本原因仍然未知，但如果考虑到论坛，它几乎可以缩小到病毒或恶意软件感染、第 3 方程序冲突或特定服务被禁用（地理定位^{(Geolocation)} 服务^(Services)）等。让用户烦恼的问题是当他们打开MSCONFIG时，系统默认设置为选择性^(Selective)启动，当用户选择正常^(Normal)启动时，然后单击应用^(Apply)，它立即再次默认回到选择性启动^{(Selective Start)}。

注意：^(Note:)如果您禁用了任何服务、启动项，则它会自动变为Selective。为了将您的 PC 引导到正常模式，请确保激活任何此类禁用的服务或启动项。

修复 MSCONFIG 不会在 Windows 10 上保存更改

现在在某些情况下，如果特定服务被禁用，那么这也可能导致用户无法在MSCONFIG中保存更改。在这种情况下，我们所说的服务是地理定位服务^{(Geolocation Service)}，如果您尝试启用它并单击应用^(Apply)，该服务将恢复为禁用状态并且不会保存更改。问题是，如果Geolocation服务被禁用，那么它会阻止Cortana工作，这最终会强制您的系统进入Selective Startup。此问题的唯一解决方案是启用地理定位^{(Geolocation)}服务，我们将在下面列出的解决方案之一中进行讨论。

正如我们已经讨论了导致上述问题的各种原因，是时候看看如何解决这些问题了。因此，不要浪费任何时间，让我们看看如何在下面列出的故障排除指南的帮助下实际修复 MSCONFIG 不会在Windows 10上^{(Windows 10)}保存更改。^{(Save Changes)}

修复 MSCONFIG 不会在Windows 10上^{(Windows 10)}保存更改^{(Save Changes)}

确保创建一个还原点^{(create a restore point)}，以防万一出现问题。

方法 1：确保在 Selective Startup 中选中所有服务^{(Method 1: Make sure all the services are checked in Selective Startup)}

1.按 Windows 键 + R 然后键入msconfig并按 Enter 打开系统配置。^{(System Configuration.)}

配置文件

2.现在应该已经勾选了Selective Startup，只要确保勾选“ Load system services ”和“ Load startup items”即可。^{(Load startup items.)}——

勾选 Selective Startup 然后勾选 Load system services 和 load startup items

3.接下来，切换到服务^(Services)窗口并检查列出的所有服务^{(check all the services listed)}（就像正常启动一样）。

启用 msconfig 下列出的所有服务

4.单击应用，然后单击确定。

5.重新启动您的PC，然后从系统配置^{(System Configuration)}切换到正常启动。

6.保存更改并再次重新启动您的 PC。

方法二：如果您无法启用地理位置服务^{(Method 2: If you are not able to enable Geolocation Service)}

1.按 Windows 键 + R 然后键入regedit并按Enter打开注册表编辑器^{(Registry Editor)}。

运行命令 regedit

2.导航到以下注册表项：

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lfsvc\TriggerInfo\3

3.右键单击 3 子键^{(Right-click on 3 sub-key)}并选择删除。^(Delete.)

右键单击 TriggerInfo 的 3 个子键并选择 Delete

4.重新启动您的 PC 以保存更改，然后再次尝试从系统配置切换到正常启动。看看您是否能够修复 MSCONFIG 无法在 Windows 10 上保存更改。^{(Normal startup from System Configuration. See if you’re able to Fix MSCONFIG Won’t Save Changes on Windows 10.)}

方法 3：尝试在安全模式下更改 MSCONFIG 设置^{(Method 3: Try changing MSCONFIG settings in Safe Mode)}

1.打开开始菜单，然后单击电源按钮^{(Power button)}，然后按住shift，同时单击重新启动。^{( Restart.)}

现在按住键盘上的shift键，然后单击重新启动

2.当计算机重新启动时，您将看到一个选择选项屏幕^{(Choose an option screen)}，只需单击疑难解答。^{(Troubleshoot.)}

在 Windows 10 高级启动菜单中选择一个选项

3.在下一个屏幕上选择高级选项。^(Advanced)

从故障排除屏幕中选择高级选项

4.现在在高级^(Advanced)选项屏幕上选择启动设置^{(Startup settings)}，然后单击重新启动。^(Restart.)

启动设置

5.当计算机重新启动时，选择选项 4 或 5 以选择安全模式^{(Safe Mode)}。您需要按键盘上的特定键来选择这些选项：

F4 - 启用安全模式^{(F4 – Enable Safe Mode)}
F5 - 启用带网络的安全模式^{(F5 – Enable Safe Mode with Networking)}
F6 - 启用带命令提示符的安全模式^{(F6 – Enable Safe Mode with Command Prompt)}

使用命令提示符启用安全模式

6.这将再次重新启动您的 PC，这一次您将启动到安全模式^(Mode)。

7.登录到您的Windows 管理员^{(Windows Administrator)}帐户，然后按Windows Key + X并选择 命令提示符（管理员）。^{(Command Prompt (Admin).)}

具有管理员权限的命令提示符

8.在cmd窗口中输入msconfig ，以管理员权限^{(msconfig with Administrators rights.)}打开msconfig。

9.现在在系统配置^{(System Configuration)}窗口中选择正常启动^{(Normal Startup)}并启用服务菜单中的所有服务。

系统配置使能正常启动

10.单击应用，然后单击确定。

11.单击“确定”后，您应该会看到一个弹出窗口，询问您是现在还是以后重新启动 PC。单击重新启动。^{(Click Restart.)}

12.这应该修复 MSCONFIG Wonâ€™t Save Changes但如果你仍然卡住，然后继续下一个方法。

方法 4：创建新用户帐户^{(Method 4: Create a New User Account)}

另一种解决方案是创建一个新的管理员用户帐户并使用此帐户在MSCONFIG窗口中进行更改。

1.按Windows Key + X然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

具有管理员权限的命令提示符

2.在 cmd 中键入以下命令并按Enter：

net user type_new_username type_new_password /add

net localgroup administrators type_new_username_you_created /add.

创建新用户帐户

例如：^{(For example:)}

net user troubleshooter test1234 /add
net localgroup administrators troubleshooter /add

3.命令完成后，将创建一个具有管理权限的新用户帐户。

方法 5：确保 Windows 是最新的^{(Method 5: Make sure Windows is up to date)}

1.按Windows Key + I 然后选择 更新和安全。^{(Update & Security.)}

更新和安全

2.下一步，再次单击 检查更新^{(Check for updates)}并确保安装任何待处理的更新。

单击 Windows Update 下的检查更新

3.安装更新后，重新启动您的 PC，看看您是否能够 修复 MSCONFIG 无法在 Windows 10 上保存更改。^{(Fix MSCONFIG Won’t Save Changes on Windows 10.)}

方法六：暂时禁用杀毒软件^{(Method 6: Temporarily Disable Antivirus Software)}

1.右键单击系统托盘中的防病毒程序图标^{( Antivirus Program icon)}，然后选择禁用。^(Disable.)

禁用自动保护以禁用您的防病毒软件

2.接下来，选择防病毒软件将保持禁用的时间范围。^{( Antivirus will remain disabled.)}

选择直到禁用防病毒软件的持续时间

注意：选择尽可能少的时间，例如 15 分钟或 30 分钟。

3.再次尝试更改MSCONFIG窗口中的设置，看看您是否能够毫无问题地这样做。

方法 7：修复安装 Windows 10^{(Method 7: Repair Install Windows 10)}

这种方法是最后的手段，因为如果没有任何效果，那么这种方法肯定会修复您 PC 的所有问题。修复^{(Repair Install)}仅使用就地升级来修复系统问题而不删除系统上存在的用户数据进行安装。因此，请按照本文查看如何轻松修复安装 Windows 10。^{(How to Repair Install Windows 10 Easily.)}

选择要保留 Windows 10 的内容

为你推荐：^{(Recommended for you:)}

修复笔记本电脑扬声器没有声音的问题^{(Fix No Sound From Laptop Speakers)}
修复异常未知软件异常（0xe0434352）^{(Fix The exception unknown software exception (0xe0434352))}
如何修复 PC 无法识别的 SD 卡^{(How To Fix SD Card not Recognized by PC)}
修复无法在任务管理器中更改进程优先级^{(Fix Unable to change process priority in Task Manager)}

就是这样，您已成功修复 MSCONFIG 不会在 Windows 10 上保存更改，^{(Fix MSCONFIG Won’t Save Changes on Windows 10)}但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

Fix MSCONFIG Won't Save Changes on Windows 10

Fix MSCONFIG Won’t Save Changes on Windows 10: If you are not able to save any settings in MSCONFIG then this means then your MSCONFIG is not saving changes because of the permission issues. While the underlying cause of the issue is still unknown but if the forums are considered it pretty much narrow downs to virus or malware infection, 3rd party program conflict, or particular service being disabled (Geolocation Services) etc. The issues which is annoying users is that when they open MSCONFIG the system is by default set to Selective startup and when the user select Normal startup then click Apply, it immediately defaults back to Selective Start again.

Note: If you have disabled any service(s), startup item(s) then it automatically becomes Selective. In order to boot your PC into normal mode make sure to activate any such disabled service(s) or startup item(s).

Now in some cases, if the particular service is disabled then this can also cause users not being able to save changes in MSCONFIG. In this case, the service which we are talking about is Geolocation Service and if you try to enable it and click Apply, the service will revert back to disable state and the changes will not be saved. The issue is that if Geolocation service is disabled then it prevents Cortana from working which ultimately force your system in Selective Startup. The only solution to this problem is to enable the Geolocation service which we will discuss in one of the below-listed solutions.

As we have discussed the various reasons which cause the above problem it’s time to see how to resolve the issues. So without wasting any time let’s see how to actually Fix MSCONFIG Won’t Save Changes on Windows 10 with the help of below-listed troubleshooting guide.

Fix MSCONFIG Won’t Save Changes on Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Make sure all the services are checked in Selective Startup

1.Press Windows Key + R then type msconfig and hit Enter to open System Configuration.

msconfig

2.Now Selective Startup should already be checked, just make sure to check “Load system services” and “Load startup items.“

Checkmark Selective Startup then checkmark Load system services and load startup items

3.Next, switch to Services window and check all the services listed (like a normal startup).

Enable all the services listed under msconfig

4.Click Apply followed by OK.

5.Restart your PC and then switch to normal startup from System Configuration.

6.Save changes and again reboot your PC.

Method 2: If you are not able to enable Geolocation Service

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

Run command regedit

2.Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lfsvc\TriggerInfo\3

3.Right-click on 3 sub-key and select Delete.

Right click on 3 sub key of TriggerInfo and select Delete

4.Reboot your PC to save changes and again try to switch to Normal startup from System Configuration. See if you’re able to Fix MSCONFIG Won’t Save Changes on Windows 10.

Method 3: Try changing MSCONFIG settings in Safe Mode

1.Open Start Menu then click on Power button and then hold shift while clicking on Restart.

Now press & hold the shift key on the keyboard and click on Restart

2.When the computer restarts you will see a Choose an option screen, just click on Troubleshoot.

Choose an option at windows 10 advanced boot menu

3.Select Advanced options on the next screen.

select advanced option from troubleshoot screen

4.Now select Startup settings on Advanced options screen and then click Restart.

Startup settings

5.When the computer reboot, select option 4 or 5 to choose Safe Mode. You need to press a particular key on the keyboard to select these options:

F4 – Enable Safe Mode
F5 – Enable Safe Mode with Networking
F6 – Enable Safe Mode with Command Prompt

Enable Safe Mode with Command Prompt

6.This will again reboot your PC and this time you will boot into Safe Mode.

7.Log into your Windows Administrator account and then press Windows Key + X and select Command Prompt (Admin).

command prompt with admin rights

8.Type msconfig in the cmd window to open msconfig with Administrators rights.

9.Now inside System Configuration window select Normal Startup and enable all the services in services menu.

system configuration enable normal startup

10.Click Apply followed by OK.

11.As soon as you click OK you should see a pop up asking you if you want to restart the PC now or later. Click Restart.

12.This should Fix MSCONFIG Won’t Save Changes but if you’re still stuck, then continue with next method.

Method 4: Create a New User Account

The other solution would be to create a new administrator user account and use this account to make changes in MSCONFIG window.

1.Press Windows Key + X then select Command Prompt (Admin).

command prompt with admin rights

2.Type the following command into cmd and hit Enter:

net user type_new_username type_new_password /add

net localgroup administrators type_new_username_you_created /add.

create new user account

For example:

net user troubleshooter test1234 /add
net localgroup administrators troubleshooter /add

3.As soon as the command is finished, a new user account will be created with administrative privileges.

Method 5: Make sure Windows is up to date

1.Press Windows Key + I then select Update & Security.

Update & security

2.Next, again click Check for updates and make sure to install any pending updates.

click check for updates under Windows Update

3.After the updates are installed reboot your PC and see if you’re able to Fix MSCONFIG Won’t Save Changes on Windows 10.

Method 6: Temporarily Disable Antivirus Software

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

Disable auto-protect to disable your Antivirus

2.Next, select the time frame for which the Antivirus will remain disabled.

select the duration until when the antivirus will be disabled

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Again try to change settings in MSCONFIG window and see if you’re able to do so without any issues.

Method 7: Repair Install Windows 10

This method is the last resort because if nothing works out then this method will surely repair all problems with your PC. Repair Install just using an in-place upgrade to repair issues with the system without deleting user data present on the system. So follow this article to see How to Repair Install Windows 10 Easily.

choose what to keep windows 10

Recommended for you:

That’s it you have successfully Fix MSCONFIG Won’t Save Changes on Windows 10 but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

瑛武

About the author

我是一名专业的音频工程师，拥有超过 10 年的经验。我参与过各种各样的项目，从小型家庭音响系统到大型商业制作。我的技能在于创造出色的配乐和声音处理工具，让音乐听起来很棒。我对 Windows 10 也非常有经验，可以帮助您充分利用您的计算机系统。

修复 MSCONFIG 不会在 Windows 10 上保存更改

修复 MSCONFIG 不会在Windows 10上(Windows 10)保存更改(Save Changes)

方法 1：确保在 Selective Startup 中选中所有服务(Method 1: Make sure all the services are checked in Selective Startup)

方法二：如果您无法启用地理位置服务(Method 2: If you are not able to enable Geolocation Service)

方法 3：尝试在安全模式下更改 MSCONFIG 设置(Method 3: Try changing MSCONFIG settings in Safe Mode)

方法 4：创建新用户帐户(Method 4: Create a New User Account)

方法 5：确保 Windows 是最新的(Method 5: Make sure Windows is up to date)

方法六：暂时禁用杀毒软件(Method 6: Temporarily Disable Antivirus Software)

方法 7：修复安装 Windows 10(Method 7: Repair Install Windows 10)

Fix MSCONFIG Won't Save Changes on Windows 10

Fix MSCONFIG Won’t Save Changes on Windows 10

Method 1: Make sure all the services are checked in Selective Startup

Method 2: If you are not able to enable Geolocation Service

Method 3: Try changing MSCONFIG settings in Safe Mode

Method 4: Create a New User Account

Method 5: Make sure Windows is up to date

Method 6: Temporarily Disable Antivirus Software

Method 7: Repair Install Windows 10

瑛 武

About the author

Related posts

Fix Computer Wo在Windows 10中没有转到Sleep Mode

Windows 10中的Fix Desktop Background Changes Automatically

Windows 10中Fix GeForce Experience Wo不是Open

Windows 10中的Fix Black Desktop Background

Fix Alt+Tab不在Windows 10工作

Fix Rotation Lock在Windows 10中灰色

Fix System图标未显示在Windows 10任务栏上

7 Ways至Windows 10中的Fix Critical Process Died

Fix Spacebar无效Windows 10

如何在Windows 10响应Fix Printer

Fix Option Windows 10缺少Bluetooth的Bluetooth或关闭

Windows 10上的Fix Generic PnP Monitor Problem

Windows 10 Fix Unable至Install DirectX

升级到Windows 10后未检测到Fix CD/DVD drive

Fix Integrated Webcam无效Windows 10

Fix Keyboard未在Windows 10中键入

Fix Wacom Tablet Driver Windows 10中Fix Wacom Tablet Driver号Found

Fix Calculator不在Windows 10工作

Fix 5GHz WiFi在Windows 10中没有出现

Fix Computer Sound Too Low在Windows 10上

修复 MSCONFIG 不会在Windows 10上^{(Windows 10)}保存更改^{(Save Changes)}

方法 1：确保在 Selective Startup 中选中所有服务^{(Method 1: Make sure all the services are checked in Selective Startup)}

方法二：如果您无法启用地理位置服务^{(Method 2: If you are not able to enable Geolocation Service)}

方法 3：尝试在安全模式下更改 MSCONFIG 设置^{(Method 3: Try changing MSCONFIG settings in Safe Mode)}

方法 4：创建新用户帐户^{(Method 4: Create a New User Account)}

方法 5：确保 Windows 是最新的^{(Method 5: Make sure Windows is up to date)}

方法六：暂时禁用杀毒软件^{(Method 6: Temporarily Disable Antivirus Software)}

方法 7：修复安装 Windows 10^{(Method 7: Repair Install Windows 10)}

瑛武