修复您的计算机存在内存问题：(Fix Your Computer has a Memory problem:) 如果您面临蓝屏(Blue)死机( BSOD ) 并显示错误消息“ MEMORY_MANAGEMENT ”，则您的(Your) 计算机(Computer)存在内存(Memory)问题，需要尽快诊断。此外，如果您运行Windows 内存诊断(Windows Memory Diagnostic)工具，它可能会返回一条错误消息“您的(Your)计算机存在内存问题，内存(Memory)问题可能导致您的计算机丢失信息或停止工作，请联系系统制造商。”
上述错误并不意味着RAM一定有问题，但潜在问题也可能与驱动程序有关，因此在不诊断问题的情况下不要去更换RAM。因此，不要浪费任何时间，让我们看看如何在下面列出的故障排除指南的帮助下实际修复您的计算机(Your Computer)存在内存问题。
注意：(Note:) 请(Make)确保您没有超频您的 PC，然后确保停止它。
修复您的计算机(Fix Your Computer)有内存问题
确保 创建一个还原点(create a restore point) 以防万一出现问题。
方法 1：运行 Windows 内存诊断(Method 1: Run Windows Memory Diagnostic)
1.在Windows搜索栏中键入内存，然后选择“ Windows 内存诊断”。(Windows Memory Diagnostic.)“
2.在显示的选项集中选择“立即重新启动并检查问题。(Restart now and check for problems.)“
3.之后，Windows将重新启动以检查可能的 RAM 错误，并有望修复您的计算机存在内存问题。(Fix Your Computer has a Memory problem.)
4.重新启动您的 PC 以保存更改。
Method 2: Run Memtest86+
1.将USB闪存驱动器连接到您的系统。
2.下载并安装Windows Memtest86 USB Key 自动安装程序(Windows Memtest86 Auto-installer for USB Key)。
3.右键单击刚刚下载的图像文件，然后选择“在此处提取(Extract here)”选项。
4.解压后，打开文件夹并运行Memtest86+ USB Installer。
5.选择您插入的USB驱动器，以便刻录MemTest86软件（这将格式化您的USB驱动器）。
6.完成上述过程后，将USB插入出现“您的计算机存在内存问题(Your Computer has a Memory problem)”错误的 PC。
7.重新启动您的 PC 并确保选择从USB闪存驱动器启动。
8.Memtest86 将开始测试系统中的内存损坏。
9.如果你通过了所有的测试，那么你可以确定你的记忆工作正常。
10.如果某些步骤不成功，那么Memtest86会发现内存损坏，这意味着“您的计算机(Computer)有内存问题”错误是因为内存损坏/损坏。
11.为了 修复您的计算机有内存问题( Fix Your Computer has a Memory problem)，如果发现坏内存扇区，您将需要更换您的RAM 。
方法 3：运行驱动程序验证程序(Method 3: Run Driver Verifier)
仅当您可以正常登录Windows时，此方法才有用，而不是在安全模式下。接下来，确保创建一个系统还原点。
运行驱动程序验证程序(Driver Verifier) 以修复您的计算机有内存问题。(Fix Your Computer has a Memory problem.)这将消除可能发生此错误的任何冲突驱动程序问题。
方法 4：执行系统还原(Method 4: Perform System Restore)
1.按 Windows 键 + R 并输入“ sysdm.cpl ”然后回车。
2.选择系统保护(System Protection)选项卡，然后选择系统还原。( System Restore.)
3.单击下一步并选择所需的系统还原点(System Restore point)。
4.按照屏幕提示完成系统还原。
5.重新启动后，您可能能够修复您的计算机有内存问题。(Fix Your Computer has a Memory problem.)
方法 5：更新 BIOS(Method 5: Update BIOS)
执行BIOS更新是一项关键任务，如果出现问题，可能会严重损坏您的系统，因此建议专家监督。
1.第一步是识别您的BIOS版本，按 Windows Key + R然后输入“ msinfo32 ”（不带引号）并按回车键打开系统信息(System Information)。
2. 一旦系统信息( System Information)窗口打开，找到BIOS Version/Date，然后记下制造商和BIOS版本。
3.接下来，访问您的制造商网站，例如在我的情况下是戴尔(Dell)，所以我将访问戴尔网站(Dell website)，然后输入我的计算机序列号或单击自动检测选项。
4.现在从显示的驱动程序列表中，我将单击BIOS并下载推荐的更新。
注意：更新(Note:)BIOS时请勿关闭计算机或断开电源，否则可能会损坏计算机。在更新期间，您的计算机将重新启动，您将短暂看到黑屏。
5.下载文件后，只需双击Exe文件即可运行它。
6.最后，您已经更新了BIOS，这也可以 修复您的计算机有内存问题。(Fix Your Computer has a Memory problem.)
方法 6：排除 BSOD 错误(Method 6: Troubleshoot BSOD Error)
1.从这里(here.)下载 BlueScreenView 。
2.根据您的Windows架构解压或安装软件，双击运行应用程序。
3.选择MEMORY_MANAGEMENT（Bug Check String）并寻找“caused by driver”。
4.谷歌搜索导致问题的软件或驱动程序并修复根本原因。
方法 7：运行 CCleaner 和 Malwarebytes(Method 7: Run CCleaner and Malwarebytes)
1.下载并安装 CCleaner & Malwarebytes。
2.运行 Malwarebytes(Run Malwarebytes)(Run Malwarebytes) 并让它扫描您的系统以查找有害文件。
3.如果发现恶意软件，它将自动删除它们。
4.现在运行 CCleaner ，在“Cleaner”部分的“ Windows ”选项卡下，我们建议检查以下要清理的选项：
5.一旦您确定检查了正确的点，只需单击 Run Cleaner， 然后让 CCleaner 运行。
6.要清理您的系统，请进一步选择注册表(Registry)选项卡并确保选中以下内容：
7.选择Scan for Issue并允许CCleaner扫描，然后单击 Fix Selected Issues。
8.当CCleaner 询问“您要备份对注册表的更改吗？(Do you want backup changes to the registry?)” 选择是。
9.备份完成后，选择Fix All Selected Issues。
10.重新启动您的 PC 以保存更改并查看您是否能够 修复您的计算机存在内存问题。(Fix Your Computer has a Memory problem.)
方法八：检查内存槽是否损坏(Method 8: Check if Memory Slots are Damaged)
注意：(Note:)为此，您需要打开您的笔记本电脑或 PC，这有时会使保修失效，因此最好将笔记本电脑带到维修或服务中心。如果您不知道自己在做什么，则建议进行专家监督。
如果您有两个RAM插槽，则卸下两个RAM，清洁插槽，然后将RAM插入仅一个插槽，看看问题是否已解决。如果没有，则再次对另一个插槽执行相同的操作，看看这是否有助于解决问题。
现在，如果您仍然面临MEMORY_MANAGEMENT错误，那么您需要用新的RAM替换您的 RAM ，这肯定会解决问题。
为你推荐：(Recommended for you:)
就是这样，您已成功修复您的计算机出现内存问题(Fix Your Computer has a Memory problem)错误，但如果您对这篇文章仍有任何疑问，请随时在评论部分询问他们。
Fix Your Computer has a Memory problem
Fix Your Computer has a Memory problem: If you are facing Blue screen of death (BSOD) with an error message “MEMORY_MANAGEMENT” then Your Computer has a Memory problem which needs to be diagnosed as soon as possible. Also if you run Windows Memory Diagnostic tool, chances are it will return an error message “Your computer has a memory problem, Memory problems can cause your computer to lose information or stop working, contact system manufacturer.”
The above error doesn’t mean there is necessarily something wrong with the RAM but the underlying problem can be related to drivers also, so without diagnosing the issue don’t go and replace your RAM. So without wasting any time let’s see how to actually Fix Your Computer has a Memory problem with the help of below-listed troubleshooting guide.
Note: Make sure you’re not overclocking your PC if you are, then make sure to stop it.
Fix Your Computer has a Memory problem
Make sure to create a restore point just in case something goes wrong.
Method 1: Run Windows Memory Diagnostic
1.Type memory in the Windows search bar and select “Windows Memory Diagnostic.“
2.In the set of options displayed select “Restart now and check for problems.“
3.After which Windows will restart to check for possible RAM errors and will hopefully Fix Your Computer has a Memory problem.
4.Reboot your PC to save changes.
Method 2: Run Memtest86+
1.Connect a USB flash drive to your system.
2.Download and install Windows Memtest86 Auto-installer for USB Key.
3.Right-click on the image file which you just downloaded and select “Extract here” option.
4.Once extracted, open the folder and run the Memtest86+ USB Installer.
5.Choose your plugged in USB drive, in order to burn the MemTest86 software (This will format your USB drive).
6.Once the above process is finished, insert the USB to the PC in which you’re getting the “Your Computer has a Memory problem” error.
7.Restart your PC and make sure that boot from the USB flash drive is selected.
8.Memtest86 will begin testing for memory corruption in your system.
9.If you have passed all the test then you can be sure that your memory is working correctly.
10.If some of the steps were unsuccessful then Memtest86 will find memory corruption which means “Your Computer has a Memory problem” error is because of bad/corrupt memory.
11.In order to Fix Your Computer has a Memory problem, you will need to replace your RAM if bad memory sectors are found.
Method 3: Run Driver Verifier
This method is only useful if you can log into your Windows normally not in the safe mode. Next, make sure to create a System Restore point.
Run Driver Verifier in order Fix Your Computer has a Memory problem. This would eliminate any conflicting driver issues due which this error can occur.
Method 4: Perform System Restore
1.Press Windows Key + R and type”sysdm.cpl” then hit enter.
2.Select System Protection tab and choose System Restore.
3.Click Next and choose the desired System Restore point.
4.Follow the on-screen instruction to complete system restore.
5.After reboot, you may be able to Fix Your Computer has a Memory problem.
Method 5: Update BIOS
Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, an expert supervision is recommended.
1.The first step is to identify your BIOS version, to do so press Windows Key + R then type “msinfo32” (without quotes) and hit enter to open System Information.
2.Once the System Information window opens locate BIOS Version/Date then note down the manufacturer and BIOS version.
3.Next, go to your manufacturer’s website for e.g in my case it’s Dell so I will go to Dell website and then I will enter my computer serial number or click on the auto detect option.
4.Now from the list of drivers shown I will click on BIOS and will download the recommended update.
Note: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.
5.Once the file is downloaded, just double-click on the Exe file to run it.
6.Finally, you have updated your BIOS and this may also Fix Your Computer has a Memory problem.
Method 6: Troubleshoot BSOD Error
1.Download BlueScreenView from here.
2.Extract or install the software according to your Windows architecture and double click on it to run the application.
3.Select the MEMORY_MANAGEMENT (Bug Check String) and look for the “caused by driver”.
4.Google search the software or driver causing the issue and fix the underlying cause.
Method 7: Run CCleaner and Malwarebytes
1.Download and install CCleaner & Malwarebytes.
2.Run Malwarebytes and let it scan your system for harmful files.
3.If malware is found it will automatically remove them.
4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:
5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.
6.To clean your system further select the Registry tab and ensure the following are checked:
7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.
8.When CCleaner asks “Do you want backup changes to the registry?” select Yes.
9.Once your backup has completed, select Fix All Selected Issues.
10.Restart your PC to save changes and see if you’re able to Fix Your Computer has a Memory problem.
Method 8: Check if Memory Slots are Damaged
Note: For this, you need to open your laptop or PC which sometimes void warranty, so it’s better to take the laptop to repair or service center. If you don’t know what you are doing then expert supervision is recommended.
If you have two RAM slots then remove both RAM’s, clean the slot and then insert RAM in only one slot and see if the issue is resolved. If it didn’t, then again do the same thing with another slot and see if this helps in fixing the issue.
Now if you are still facing the MEMORY_MANAGEMENT error then you need to replace your RAM with a new one which will definitely fix the issue.
Recommended for you:
That’s it you have successfully Fix Your Computer has a Memory problem error but if you still have any queries regarding this post then feel free to ask them in the comment’s section.
