修复 Windows 10 安装失败并出现错误 C1900101-4000D： ^{(Fix Windows 10 install Fails With Error C1900101-4000D: )}如果您尝试升级到Windows 10但安装失败并出现错误代码C1900101-4000D，请不要担心，因为Windows安装程序无法访问安装所需的重要文件. 有时此错误也是由于安装过程中的冲突引起的，但您无法确定，因为此错误没有伴随此错误消息。

0xC1900101-0x4000D
SECOND_BOOT阶段安装失败，MIGRATE_DATA操作出错^{(The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation)}

虽然这个问题没有明确的解决方案，但用户似乎建议全新安装Windows 10，这只能作为最后的手段。因此，不要浪费任何时间，让我们在下面列出的故障排除指南的帮助下，看看如何修复 Windows 10^{(Fix Windows 10)}安装失败^(Fails)并出现错误 C1900101-4000D 。^{(Error C1900101-4000D)}

修复^(Fix)Windows 10 安装失败^(Fails)并出现错误 C1900101-4000D^{(Error C1900101-4000D)}

先决条件^{(Prerequisites)}

a)确保^(Make)在安装 Windows 10 之前更新所有驱动程序，包括图形、声音、BIOS、USB设备、打印机等。

b)移除^(Remove)所有外部USB设备，例如笔式驱动器、外部硬盘、USB 键盘^{(USB keyboard)}和鼠标、USB打印机和所有外围设备。

c)使用^(Use)以太网电缆而不是WiFi并禁用WiFi，直到更新完成。

方法 1：在尝试升级之前暂时禁用防病毒和防火墙^{(Method 1: Temporarily Disable Antivirus and Firewall before attempting Upgrade)}

1.右键单击系统托盘中的防病毒程序图标^{( Antivirus Program icon)}，然后选择禁用。^(Disable.)

2.接下来，选择防病毒软件将保持禁用的时间范围。^{( Antivirus will remain disabled.)}

注意：^(Note:)选择尽可能少的时间，例如 15 分钟或 30 分钟。

3.完成后，再次尝试升级您的 PC 并检查错误是否解决。

4. 在Windows 搜索^{(Windows Search)}中键入 control，然后从搜索结果中单击控制面板。^{(Control Panel)}

5.下一步，点击系统和安全。^{( System and Security.)}

6.然后点击Windows防火墙。^{(Windows Firewall.)}

7.现在从左侧窗格中单击打开或关闭 Windows 防火墙。^{(Turn Windows Firewall on or off.)}

8.选择关闭 Windows 防火墙并重新启动您的 PC。^{(Select Turn off Windows Firewall and restart your PC. )}再次尝试升级您的 PC，看看您是否能够 修复 Windows 10 安装失败并出现错误 C1900101-4000D。^{(Fix Windows 10 install Fails With Error C1900101-4000D.)}

如果上述方法不起作用，请确保按照完全相同的步骤再次打开防火墙。

方法 2：从您的计算机或机器名称中删除任何连字符^{(Method 2: Remove any hyphens from your computer or machine name)}

1.按 Windows 键 + R 然后键入sysdm.cpl并按 Enter 打开系统属性。^{(System Properties.)}

2.确保您在计算机名称选项卡^{(Computer Name tab)}下，然后单击底部的更改按钮。^{( Change)}

3.确保您的机器名称简单，没有句点、连字符或破折号。^{(Make sure your machine name is simple no periods or hyphens or dashes.)}

4.单击确定，然后单击应用^(Apply)，然后单击确定。

5.重新启动您的 PC 以保存更改。

方法 3：确保 Windows 是最新的^{(Method 3: Make sure Windows is up to date)}

1.按Windows Key + I 然后选择 更新和安全。^{(Update & Security.)}

2.下一步，再次单击 检查更新^{(Check for updates)} 并确保安装任何待处理的更新。

3.安装更新后重新启动您的 PC，看看您是否能够 修复 Windows 10 安装失败并出现错误 C1900101-4000D。^{(Fix Windows 10 install Fails With Error C1900101-4000D.)}

方法 4：执行干净启动^{(Method 4: Perform a Clean Boot)}

这将确保如果任何 3rd 方应用程序与Windows更新冲突，那么您将能够在Clean Boot中成功安装^{(Clean Boot)}Windows 更新^{(Windows Updates)}。有时，第 3 方软件可能会与Windows Update发生冲突，从而导致Windows Update^{(Windows Update)}卡住^(Stuck)。为了修复 Windows 10 安装失败并出现错误 C1900101-4000D^{(Fix Windows 10 install Fails With Error C1900101-4000D)}，您需要在 PC 上执行干净启动^{(perform a clean boot)}并逐步诊断问题。

方法 5：使用 Windows 10 媒体创建工具升级^{(Method 5: Upgrade using Windows 10 Media Creation Tool)}

1.在此处下载媒体创建工具。^{(Download Media Creation Tool here.)}

2.从系统分区备份您的数据并保存您的许可证密钥。

3.启动工具并选择立即升级这台电脑。^{(Upgrade this PC now.)}

4.接受许可条款。

5.安装程序准备好后，选择保留个人文件和应用程序。^{( Keep personal files and apps.)}

6.PC会重新启动几次，您的PC将成功升级。

方法 6：运行 SFC 和 DISM^{(Method 6: Run SFC and DISM)}

1.按Windows Key + X然后单击命令提示符（管理员）。^{( Command Prompt(Admin).)}

2.现在在cmd中输入以下内容并回车：

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.等待上述过程完成，完成后重新启动您的电脑。

4.再次打开cmd并输入以下命令并在每个命令后按回车键：

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5.让DISM命令运行并等待它完成。

6. 如果上述命令不起作用，请尝试以下操作：

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

注意：^(Note:) 将^(Replace)C:RepairSourceWindows 替换为修复源的位置（Windows 安装^{(Windows Installation)}或恢复光盘^{(Recovery Disc)}）。

7.重新启动您的 PC 以保存更改并查看您是否能够 修复 Windows 10 安装失败并出现错误 C1900101-4000D。^{(Fix Windows 10 install Fails With Error C1900101-4000D.)}

方法 7：重置 Windows 更新组件^{(Method 7: Reset Windows Updates Components)}

1.按Windows Key + X然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

2.现在键入以下命令以停止Windows 更新^{(Windows Update)} 服务^(Services)，然后在每个命令后按 Enter ：^(Enter)

网络停止 wuauserv^{(net stop wuauserv)}
网络停止 cryptSvc^{(net stop cryptSvc)}
网络停止位^{(net stop bits)}
网络停止 msiserver^{(net stop msiserver)}

3.接下来，键入以下命令以重命名SoftwareDistribution 文件夹^{(SoftwareDistribution Folder)}，然后按 Enter^(Enter)：

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

4.最后，键入以下命令以启动Windows 更新^{(Windows Update)} 服务^(Services)并在每个命令后按 Enter ：^(Enter)

网络启动 wuauserv^{(net start wuauserv)}
网络启动 cryptSvc^{(net start cryptSvc)}
网络启动位^{(net start bits)}
网络启动 msiserver^{(net start msiserver)}

5.重新启动您的 PC 以保存更改并检查您是否能够 修复 Windows 10 安装失败并出现错误 C1900101-4000D。^{( Fix Windows 10 install Fails With Error C1900101-4000D.)}

方法8：删除挂载镜像的注册表^{(Method 8: Delete Registry for Mounted Images)}

1.按 Windows 键 + R 然后键入regedit并按Enter打开注册表编辑器^{(Registry Editor)}。

2.导航到以下注册表项：

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WIMMount\Mounted Images

3.选择已安装的图像^{(Mounted Images)}，然后在右侧窗格中右键单击（默认）并选择删除。^{(right-click on (Default) and select Delete.)}

4.退出注册表编辑器^{(Registry Editor)}并重新启动您的 PC 以保存更改。

Method 9: Disable Wi-Fi Adapter and CD/DVD Drive

1.按 Windows 键 + R 然后键入devmgmt.msc并按Enter打开设备管理器^{(Device Manager)}。

2 .Expand DVD/CD-ROM drives，然后右键单击您的CD/DVD Drive并选择禁用设备。^{(Disable device.)}

3. 同样，展开网络^(Network)适配器，然后右键单击您的 WiFi^{(right-click on your WiFi)}适配器并选择禁用设备。^{(Disable device.)}

4.再次尝试运行Windows 10安装程序，看看您是否能够修复 Windows 10 安装失败并出现错误 C1900101-4000D。^{(Fix Windows 10 install Fails With Error C1900101-4000D.)}

方法 10：运行 Malwarebytes 和 AdwCleaner^{(Method 10: Run Malwarebytes and AdwCleaner)}

Malwarebytes是一款功能强大的按需扫描程序，可以从您的 PC 中删除浏览器劫持者、广告软件和其他类型的恶意软件。请务必注意，Malwarebytes将与防病毒软件一起运行而不会发生冲突。要安装和运行Malwarebytes Anti-Malware，请转到本文^{(go to this article)}并按照每一步操作。

1.从此链接下载 AdwCleaner^{(Download AdwCleaner from this link)}。

2.下载完成后，双击adwcleaner.exe文件^{(adwcleaner.exe file)}运行程序。

3.点击“我同意^{(I agree)}”按钮接受许可协议。^{(accept the license agreement.)}

4.在下一个屏幕上，单击操作下的扫描按钮^{(Scan button)}。

5.现在，等待AdwCleaner搜索PUP 和其他恶意程序。^{( PUPs and other malicious programs.)}

6.扫描完成后，单击“清理^(Clean)”以清理系统中的此类文件。

7.保存您可能正在进行的任何工作，因为您的 PC 需要重新启动，单击确定以重新启动您的 PC。

8.计算机重新启动后，将打开一个日志文件，其中将列出在上一步中删除的所有文件、文件夹、注册表项等。

受到推崇的：^{(Recommended:)}

• 如何修复 Firefox 黑屏问题^{(How To Fix Firefox Black Screen Issue)}
• 修复 YouTube 绿屏视频播放^{(Fix YouTube Green Screen Video Playback)}
• 在 Windows 10 中卸载 Microsoft Security Essentials^{(Uninstall Microsoft Security Essentials in Windows 10)}
• 从 Web 浏览器中删除广告软件和弹出式广告^{(Remove Adware and Pop-up Ads from Web Browser)}

就是这样，您已成功修复 Windows 10 安装失败并出现错误 C1900101-4000D^{(Fix Windows 10 install Fails With Error C1900101-4000D)}，但如果您对本指南仍有任何疑问，请随时在评论部分询问。

Fix Windows 10 install Fails With Error C1900101-4000D

Fix Windows 10 install Fails With Error C1900101-4000D: If you’re trying to upgrade to Windows 10 but the install fails with error code C1900101-4000D then don’t worry as it occurs because the Windows installer cannot access important files required for installation. Sometimes this error is also caused because of a conflict during installation but you can’t be sure as there is no error message accompanying this error.

0xC1900101-0x4000D
The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation

While there is no definite fix for this issue but users seem to be recommending a clean installation of Windows 10 which should only be used as a last resort. So without wasting any time let’s see How to Fix Windows 10 install Fails With Error C1900101-4000D with the help of below-listed troubleshooting guide.

Fix Windows 10 install Fails With Error C1900101-4000D

Prerequisites

a)Make sure to Update all drivers, including graphic, sound, BIOS, USB devices, printers, etc before the installing Windows 10.

b)Remove all external USB devices such as pen drive, external hard disk, USB keyboard & mouse, USB printer and all peripherals.

c)Use an ethernet cable instead of WiFi and disable WiFi until the update is complete.

Method 1: Temporarily Disable Antivirus and Firewall before attempting Upgrade

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

2.Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Once done, again try to upgrade your PC  and check if the error resolves or not.

4.Type control in the Windows Search then click on Control Panel from the search result.

5.Next, click on System and Security.

6.Then click on Windows Firewall.

7.Now from the left window pane click on Turn Windows Firewall on or off.

8.Select Turn off Windows Firewall and restart your PC. Again try to upgrade your PC and see if you’re able to Fix Windows 10 install Fails With Error C1900101-4000D.

If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 2: Remove any hyphens from your computer or machine name

1.Press Windows Key + R then type sysdm.cpl and hit Enter to open System Properties.

2.Make sure you’re under Computer Name tab then click on Change button at the bottom.

3.Make sure your machine name is simple no periods or hyphens or dashes.

4.Click OK then Apply followed by OK.

5.Reboot your PC to save changes.

Method 3: Make sure Windows is up to date

1.Press Windows Key + I then select Update & Security.

2.Next, again click Check for updates and make sure to install any pending updates.

3.After the updates are installed reboot your PC and see if you’re able to Fix Windows 10 install Fails With Error C1900101-4000D.

Method 4: Perform a Clean Boot

This would make sure that if any 3rd party application is conflicting with Windows update then you will be able to successfully install Windows Updates inside Clean Boot. Sometimes 3rd party software can conflict with Windows Update and therefore cause Windows Update to be Stuck. In order, Fix Windows 10 install Fails With Error C1900101-4000D, you need to perform a clean boot on your PC and diagnose the issue step by step.

Method 5: Upgrade using Windows 10 Media Creation Tool

1.Download Media Creation Tool here.

2.Backup your data from system partition and save your license key.

3.Start the tool and choose to Upgrade this PC now.

4.Accept the license terms.

5.After the installer is ready, choose to Keep personal files and apps.

6.The PC will restart few times and your PC would be successfully upgraded.

Method 6: Run SFC and DISM

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.Wait for the above process to finish and once done restart your PC.

4.Again open cmd and type the following command and hit enter after each one:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5.Let the DISM command run and wait for it to finish.

6. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

7.Reboot your PC to save changes and see if you’re able to Fix Windows 10 install Fails With Error C1900101-4000D.

Method 7: Reset Windows Updates Components

1.Press Windows Key + X then select Command Prompt (Admin).

2.Now type the following commands to stop Windows Update Services and then hit Enter after each one:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

3.Next, type the following command to rename SoftwareDistribution Folder and then hit Enter:

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

4.Finally, type the following command to start Windows Update Services and hit Enter after each one:

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

5.Reboot your PC to save changes and check if you are able to Fix Windows 10 install Fails With Error C1900101-4000D.

Method 8: Delete Registry for Mounted Images

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WIMMount\Mounted Images

3.Select Mounted Images then in the right window pane right-click on (Default) and select Delete.

4.Exit Registry Editor and reboot your PC to save changes.

Method 9: Disable Wi-Fi Adapter and CD/DVD Drive

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand DVD/CD-ROM drives, then right-click on your CD/DVD Drive and select Disable device.

3.Similarly, expand Network adapters then right-click on your WiFi adapter and select Disable device.

4.Again try to run Windows 10 setup and see if you’re able to Fix Windows 10 install Fails With Error C1900101-4000D.

Method 10: Run Malwarebytes and AdwCleaner

Malwarebytes is a powerful on-demand scanner which should remove browser hijackers, adware and other types of malware from your PC. It is important to note that Malwarebytes will run alongside antivirus software without conflicts. To install and run Malwarebytes Anti-Malware, go to this article and follow each and every step.

1.Download AdwCleaner from this link.

2.Once the download is complete, double-click on the adwcleaner.exe file to run the program.

3.Click on “I agree” button to accept the license agreement.

4.On the next screen, click the Scan button under Actions.

5.Now, wait for the AdwCleaner to search for PUPs and other malicious programs.

6.Once the scan is complete, click Clean in order to clean your system of such files.

7.Save any work you might be doing as your PC will need to reboot, click OK to reboot your PC.

8.Once the computer reboots, a log file will open which will list all of the files, folders, registry keys, etc that were removed in the previous step.

Recommended:

• How To Fix Firefox Black Screen Issue
• Fix YouTube Green Screen Video Playback
• Uninstall Microsoft Security Essentials in Windows 10
• Remove Adware and Pop-up Ads from Web Browser

That’s it you have successfully Fix Windows 10 install Fails With Error C1900101-4000D but if you still have any queries regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Fix Microsoft Visual C++ 2015 Redistributable Setup Fails Error 0x80240017

• Fix Error 0X80010108在Windows 10中

• 如何Fix Application Error 0xc0000005

• Fix Windows Update Error Code 0x80072efe

• 如何Fix Application Load Error 5:0000065434

• Fix Windows Installer Access Denied Error

• Fix Media Disconnected Error在Windows 10上

• Fix Omegle Error Connecting至Server（2021）

• 6 Ways至Fix Pending Transaction Steam Error

• Fix Windows Update Error 0x80246002

• Fix Unable安装Network Adapter Error Code 28

• 修复Windows无法Connect到此Network Error

• Fix PNP Detected Fatal Error Windows 10

• Fix BAD_SYSTEM_CONFIG_INFO Error

• Fix Office Activation Error Code 0xC004F074

• Fix Minecraft Error未能Write Core Dump

• Fix Windows 10 Store Error 0x80073cf9

• 如何Fix Google Drive Access Denied Error

• Fix Error 0x8007000e Preventing Backups

• Fix Windows 10 Updates Wo不是Install Error