修复 KERNEL_DATA_INPAGE_ERROR: (Fix KERNEL_DATA_INPAGE_ERROR: )如果(KERNEL_DATA_INPAGE_ERROR)您面临蓝屏(Blue)死机( BSOD ) 错误KERNEL_DATA_INPAGE_ERROR(Death)和错误检查代码(Bug Check Code)( BCCode ) 0x0000007A,那么您可以放心地假设它是由内存损坏、硬盘扇区损坏、分页文件中的坏块引起的、病毒或恶意软件、IDE故障或(IDE)SATA电缆 松动等。错误本身表明无法将页面文件中请求的内核数据页面读入内存,这只能是由于上述原因。当您尝试将系统从休眠状态或重新启动后唤醒时,您将看到BSOD屏幕。(BSOD)
KERNEL_DATA_INPAGE_ERROR
STOP: 0x0000007A
如果您重新启动系统,错误本身会纠正,但主要问题是每次将 PC 从休眠状态唤醒时,您都会面临KERNEL_DATA_INPAGE_ERROR 。因此,不要浪费任何时间,让我们看看如何在下面列出的故障排除指南的帮助下实际修复 KERNEL_DATA_INPAGE_ERROR 蓝屏(Fix KERNEL_DATA_INPAGE_ERROR Blue Screen)死机错误(Death Error)(停止:0x0000007A)。(STOP)
修复 KERNEL_DATA_INPAGE_ERROR(Fix KERNEL_DATA_INPAGE_ERROR)
确保 创建一个还原点(create a restore point) 以防万一出现问题。
方法一:运行 SFC 和 CHKDSK(Method 1: Run SFC and CHKDSK)
1.按Windows Key + X然后单击命令提示符(管理员)。(Command Prompt (Admin).)
2.现在在cmd中输入以下内容并回车:
Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
3.等待上述过程完成,完成后重新启动您的电脑。
4.接下来,从这里运行 CHKDSK Fix File System Errors with Check Disk Utility(CHKDSK)。
5.让上述过程完成并再次重新启动您的 PC 以保存更改。
方法 2:检查 SATA 电缆(Method 2: Check the SATA Cable)
在大多数情况下,此错误是由于硬盘连接错误或松动而发生的,为了确保不是这种情况,您需要检查您的 PC 是否存在连接中的任何类型的故障。
重要提示:(Important:)如果您的 PC 在保修期内,则不建议打开它的外壳,因为这会使您的保修失效,在这种情况下,更好的方法是将您的 PC 带到服务中心。另外,如果您没有任何技术知识,请不要乱用 PC,并确保寻找可以帮助您检查硬盘连接故障或松动的专业技术人员。
现在检查SATA电缆是否有故障,只需使用另一根PC电缆检查电缆是否有故障。如果是这种情况,那么只需购买另一条SATA电缆就可以为您解决问题。一旦您检查了硬盘的正确连接,请重新启动您的 PC,这一次您可以修复 KERNEL_DATA_INPAGE_ERROR BSOD(Fix KERNEL_DATA_INPAGE_ERROR BSOD)以及Windows 10(win32kfull.sys BSOD in Windows 10)错误中的 win32kfull.sys BSOD。
方法 3:运行 CCleaner 和 Malwarebytes(Method 3: Run CCleaner and Malwarebytes)
1.下载并安装 CCleaner & Malwarebytes。
2.运行 Malwarebytes(Run Malwarebytes) 并让它扫描您的系统以查找有害文件。
3.如果发现恶意软件,它将自动删除它们。
4.现在运行 CCleaner ,在“Cleaner”部分的“ Windows ”选项卡下,我们建议检查以下要清理的选项:
5.一旦您确定检查了正确的点,只需单击 Run Cleaner, 然后让 CCleaner 运行。
6.要清理您的系统,请进一步选择注册表(Registry)选项卡并确保选中以下内容:
7.选择Scan for Issue并允许CCleaner扫描,然后单击 Fix Selected Issues。
8.当CCleaner 询问“您要备份对注册表的更改吗?(Do you want backup changes to the registry?)” 选择是。
9.备份完成后,选择Fix All Selected Issues。
10.重新启动您的 PC 以保存更改,这将修复 KERNEL_DATA_INPAGE_ERROR BSOD 错误。(Fix KERNEL_DATA_INPAGE_ERROR BSOD Error.)
Method 4: Run MemTest86+
注意:(Note:)在开始之前,请确保您可以访问另一台 PC,因为您需要将Memtest86+下载并刻录到光盘或USB闪存驱动器。
1.将USB闪存驱动器连接到您的系统。
2.下载并安装Windows Memtest86 USB Key 自动安装程序(Windows Memtest86 Auto-installer for USB Key)。
3.右键单击刚刚下载的图像文件,然后选择“在此处提取(Extract here)”选项。
4.解压后,打开文件夹并运行Memtest86+ USB Installer。
5.选择您插入的USB驱动器来刻录MemTest86软件(这将格式化您的USB驱动器)。
6.完成上述过程后,将USB插入出现(USB) KERNEL_DATA_INPAGE_ERROR BSOD 错误( KERNEL_DATA_INPAGE_ERROR BSOD Error.)的 PC 。
7.重新启动您的 PC 并确保选择从USB闪存驱动器启动。
8.Memtest86 将开始测试系统中的内存损坏。
9.如果你通过了所有的测试,那么你可以确定你的记忆工作正常。
10.如果某些步骤不成功,那么Memtest86会发现内存损坏,这意味着您的“ KERNEL_DATA_INPAGE_ERROR ”是由于内存损坏/损坏。
11.为了修复 KERNEL_DATA_INPAGE_ERROR BSOD 错误( Fix KERNEL_DATA_INPAGE_ERROR BSOD Error),如果发现坏内存扇区,您需要更换RAM 。
方法 5:运行系统诊断程序(Method 5: Run System Diagnostics)
如果您仍然无法修复 KERNEL_DATA_INPAGE_ERROR BSOD 错误(Fix KERNEL_DATA_INPAGE_ERROR BSOD Error) ,那么您的硬盘可能出现故障。在这种情况下,您需要将之前的HDD或SSD更换为新的并重新安装Windows。但在得出任何结论之前,您必须运行诊断工具来检查您是否真的需要更换硬盘(Hard Disk)。
要运行Diagnostics重新启动您的 PC 并在计算机启动时(在引导屏幕之前),按F12键,当Boot菜单出现时,突出显示Boot to Utility Partition选项或Diagnostics选项,然后按 enter 启动Diagnostics。这将自动检查系统的所有硬件,并在发现任何问题时进行报告。
方法6:将分页文件设置为自动(Method 6: Set paging file to Automatic)
1.右键单击这台电脑或我的电脑(Computer),然后选择属性。(Properties.)
2.现在从左侧菜单中单击高级系统设置。( Advanced System Settings.)
3.切换到高级选项卡(Advanced tab),然后单击性能下的设置。( Settings under Performance.)
4.再次在“性能选项(Options)”窗口下切换到“高级”选项卡。( Advanced tab.)
5.单击虚拟内存下的(Virtual Memory.)更改(Change)按钮。
6.勾选 自动管理所有驱动器的页面文件大小。(Automatically manage paging file size for all drives.)
7.单击确定(OK),然后单击应用,然后单击确定。
8.重新启动您的 PC 以保存更改。
为你推荐:(Recommended for you:)
就是这样,您已成功修复 KERNEL_DATA_INPAGE_ERROR 蓝屏死机错误( Fix KERNEL_DATA_INPAGE_ERROR Blue Screen of Death error),但如果您对这篇文章仍有任何疑问,请随时在评论部分提出。
Fix KERNEL_DATA_INPAGE_ERROR
Fix KERNEL_DATA_INPAGE_ERROR: If you are facing the Blue screen of Death (BSOD) with error KERNEL_DATA_INPAGE_ERROR and a Bug Check Code (BCCode) 0x0000007A then you can safely assume that it’s caused by a bad memory, corrupt hard disk sectors, bad block in paging file, virus or malware, faulty IDE or loose SATA cable, etc. The error itself indicates that the requested page of kernel data from the paging file could not be read into memory which can only be due to the above-mentioned reasons. You will see the BSOD screen when you try to wake your system from hibernation or after a restart.
KERNEL_DATA_INPAGE_ERROR
STOP: 0x0000007A
The error itself rectifies if you restart your system but the main issue is that you will face the KERNEL_DATA_INPAGE_ERROR every single time you wake your PC from hibernation. So without wasting any time let’s see how to actually Fix KERNEL_DATA_INPAGE_ERROR Blue Screen of Death Error (STOP: 0x0000007A) with the help of below-listed troubleshooting guide.
Fix KERNEL_DATA_INPAGE_ERROR
Make sure to create a restore point just in case something goes wrong.
Method 1: Run SFC and CHKDSK
1.Press Windows Key + X then click on Command Prompt (Admin).
2.Now type the following in the cmd and hit enter:
Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
3.Wait for the above process to finish and once done restart your PC.
4.Next, run CHKDSK from here Fix File System Errors with Check Disk Utility(CHKDSK).
5.Let the above process complete and again reboot your PC to save changes.
Method 2: Check the SATA Cable
In most of the cases, this error occurs because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Important: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC to the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Now check if the SATA cable is at fault, just use another PC cable in order to check if the cable is faulty. If this is the case then simply buying another SATA cable might fix the issue for you. Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix KERNEL_DATA_INPAGE_ERROR BSOD as well as win32kfull.sys BSOD in Windows 10 Error.
Method 3: Run CCleaner and Malwarebytes
1.Download and install CCleaner & Malwarebytes.
2.Run Malwarebytes and let it scan your system for harmful files.
3.If malware is found it will automatically remove them.
4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:
5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.
6.To clean your system further select the Registry tab and ensure the following are checked:
7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.
8.When CCleaner asks “Do you want backup changes to the registry?” select Yes.
9.Once your backup has completed, select Fix All Selected Issues.
10.Restart your PC to save changes and this would Fix KERNEL_DATA_INPAGE_ERROR BSOD Error.
Method 4: Run MemTest86+
Note: Before starting, make sure you have access to another PC as you will need to download and burn Memtest86+ to the disc or USB flash drive.
1.Connect a USB flash drive to your system.
2.Download and install Windows Memtest86 Auto-installer for USB Key.
3.Right-click on the image file which you just downloaded and select “Extract here” option.
4.Once extracted, open the folder and run the Memtest86+ USB Installer.
5.Choose your plugged in USB drive to burn the MemTest86 software (This will format your USB drive).
6.Once the above process is finished, insert the USB to the PC which is giving the KERNEL_DATA_INPAGE_ERROR BSOD Error.
7.Restart your PC and make sure that boot from the USB flash drive is selected.
8.Memtest86 will begin testing for memory corruption in your system.
9.If you have passed all the test then you can be sure that your memory is working correctly.
10.If some of the steps were unsuccessful then Memtest86 will find memory corruption which means that your “KERNEL_DATA_INPAGE_ERROR” is because of bad/corrupt memory.
11.In order to Fix KERNEL_DATA_INPAGE_ERROR BSOD Error, you will need to replace your RAM if bad memory sectors are found.
Method 5: Run System Diagnostics
If you are still not able to Fix KERNEL_DATA_INPAGE_ERROR BSOD Error then chances are your hard disk might be failing. In this case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace the Hard Disk or not.
To run Diagnostics restart your PC and as the computer starts (before the boot screen), press F12 key and when the Boot menu appears, highlight the Boot to Utility Partition option or the Diagnostics option and press enter to start the Diagnostics. This will automatically check all the hardware of your system and will report back if any issue is found.
Method 6: Set paging file to Automatic
1.Right-click on This PC or My Computer and select Properties.
2.Now from the left-hand menu click on Advanced System Settings.
3.Switch to the Advanced tab and then click Settings under Performance.
4.Again under Performance Options window switch to Advanced tab.
5.Click Change button under Virtual Memory.
6.Checkmark Automatically manage paging file size for all drives.
7.Click OK then click Apply followed by OK.
8.Reboot your PC to save changes.
Recommended for you:
That’s it you have successfully Fix KERNEL_DATA_INPAGE_ERROR Blue Screen of Death error but if you still have any questions regarding this post feel free to ask them in the comment’s section.