如何在 Windows 10 中更改用户帐户类型： ^{(How to Change User Account Type in Windows 10: )}首次设置Windows时，您需要创建一个用户帐户，使用该用户帐户登录Windows并使用您的 PC。默认情况下，此帐户是管理员帐户，因为您需要安装应用程序并将其他用户添加到您需要管理员权限的 PC。当您在Windows 10 PC 上添加其他帐户时，默认情况下这些帐户将是标准用户帐户。

管理员帐户：^{(Administrator Account:)}此类帐户对 PC 具有完全控制权，可以对 PC设置^(Settings)进行任何更改或进行任何类型的自定义或安装任何应用程序^(App)。Local或Microsoft帐户都可以是管理员帐户。由于病毒和恶意软件，对 PC 设置或任何程序具有完全访问权限的Windows 管理员变得危险，因此引入了^{(Windows Administrator)}UAC（用户帐户控制^{(User Account Control)}）的概念。现在，每当执行任何需要提升权限的操作时，Windows都会显示一个UAC提示，让管理员确认是^(Yes)或否。

标准帐户：^{(Standard Account:)}此类帐户对 PC 的控制非常有限，旨在供日常使用。与管理员帐户^{(Administrator Account)}类似，标准帐户^{(Standard Account)}可以是本地帐户或Microsoft帐户。标准用户^{(Standard Users)}可以运行应用程序，但不能安装新应用程序和更改不影响其他用户的系统设置。如果执行任何需要提升权限的任务，则Windows将显示UAC提示，输入管理员帐户的用户名和密码，以便通过UAC。

现在安装Windows后，您可能希望添加另一个用户作为标准^(Standard)帐户，但将来您可能需要将该帐户类型从标准更改为管理员。因此，不要浪费任何时间，让我们看看如何^(How)在下面列出的教程的帮助下将Windows 10中的用户帐户类型^{(Change User Account Type)}从标准帐户^{(Standard Account)}更改为管理员帐户^{(Administrator Account)}，反之亦然。

注意：^(Note:)为此，您需要在 PC 上始终启用至少一个管理员帐户才能执行以下步骤。

如何在Windows 10中更改^{(Windows 10)}用户帐户类型^{(User Account Type)}

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：使用设置更改用户帐户类型^{(Method 1: Change User Account Type Using Settings)}

1.按Windows Key + I 打开设置^(Settings)，然后单击帐户。^(Accounts.)

2.从左侧菜单中单击家庭和其他人。^{(Family & other people.)}

3.现在在“其他人^{(Other People)}”下单击您要更改帐户类型的帐户。^{(your account for which you want to change the account type.)}

4.在您的帐户用户名下单击“更改帐户类型^{(Change account type)}”。

5.从帐户^(Account)类型下拉列表中，根据您的需要选择标准用户或管理员，然后单击确定。^{(Standard User or Administrator)}

6.关闭设置，然后重新启动您的电脑以保存更改。

这是 如何在 Windows 10 中更改用户帐户类型，^{(How to Change User Account Type in Windows 10)}但如果您仍然无法更改，请按照下一个方法。

方法 2：使用控制面板更改用户帐户类型^{(Method 2: Change User Account Type Using Control Panel)}

1.在Windows 搜索^{(Windows Search)}中键入 control，然后从搜索结果中单击控制面板。^{(Control Panel)}

2.下一步，点击用户账户^{(User Accounts)}，然后点击“管理另一个账户^{(Manage another account)}”。

3.点击您要更改账户类型的账户。^{(Click on the account for which you want to change the account type.)}

4.现在在您的帐户下点击“更改帐户类型^{(Change the account type)}”。

5.从帐户类型中选择标准^(Standard)或管理员^{(Administrator)}，然后单击更改帐户类型。^{(Change Account Type.)}

这是 如何使用控制面板在 Windows 10 中更改用户帐户类型。^{(How to Change User Account Type in Windows 10 using Control Panel.)}

方法 3：使用用户帐户更改用户帐户类型^{(Method 3: Change User Account Type Using User Accounts)}

1.按 Windows 键 + R 然后键入netplwiz并按 Enter。

2.确保选中^(checkmark)“用户必须输入用户名和密码才能使用这台计算机^{(Users must enter a user name and password to use this computer)}”，然后选择要更改帐户类型的用户帐户，然后单击属性。^{(Properties.)}

3.切换到组成员选项卡^{(Group Membership tab )}，然后根据您的喜好选择标准用户或管理员。^{(Standard user or Administrator)}

4.单击应用，然后单击确定。

5.关闭一切，然后重新启动您的电脑。

方法 4：使用命令提示符更改用户帐户类型^{(Method 4: Change User Account Type Using Command Prompt)}

1.按Windows Key + X然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

2.在 cmd 中输入以下命令，将帐户类型从标准用户更改为管理员^{(change the account type from Standard User to Administrator)}，然后按 Enter：

net localgroup Administrators “Account_Username” /add

注意：^(Note:) 将 Account_Username 替换^{(Replace Account_Username)}为您要更改其类型的帐户的实际用户名。您可以使用以下命令获取标准帐户的用户名：net localgroup users

3.类似地将帐户类型从管理员更改为标准用户^{(change the account type from Administrator to Standard User)}，请使用以下命令：

net localgroup Administrators “Account_Username” /delete
net localgroup Users “Account_Username” /add

注意：^(Note:) 将 Account_Username 替换^{(Replace Account_Username)}为您要更改其类型的帐户的实际用户名。您可以使用以下命令获取管理员^{(Administrator)}帐户的用户名：net localgroup administrators

4.您可以使用以下命令检查用户帐户的类型：

网络本地组用户^{(net localgroup Users)}

5.重新启动您的 PC 以保存更改。

受到推崇的：^{(Recommended:)}

• 如何在 Windows 10 中将 PIN 添加到您的帐户^{(How to Add a PIN to Your Account in Windows 10)}
• 在 Windows 10 中重命名用户配置文件文件夹^{(Rename User Profile Folder in Windows 10)}
• 在 Windows 10 中查找用户的安全标识符 (SID)^{(Find Security Identifier (SID) of User in Windows 10)}
• 如何在 Windows 10 中添加图片密码^{(How to Add a Picture Password in Windows 10)}

就是这样，您已经成功学习了如何在 Windows 10 中更改用户帐户类型，^{(How to Change User Account Type in Windows 10)}但如果您对本教程仍有任何疑问，请随时在评论部分询问他们。

How to Change User Account Type in Windows 10

How to Change User Account Type in Windows 10: When you first set up Windows you need to create a user account using which you log into Windows and use your PC. This account is by default an administrator account as you need to install apps and add other users to the PC for which you need administrator privileges. When you add other accounts on Windows 10 PC, then by default these accounts will be the standard user account.

Administrator Account: This type of account have complete control over PC and can make any changes to PC Settings or make any type of customization or install any App. Both a Local or Microsoft account can be an administrator account. Because of virus & malware, Windows Administrator with full access to PC settings or any program becomes dangerous so the concept of UAC (User Account Control) was introduced. Now, whenever any action that requires elevated rights is performed Windows will display a UAC prompt for the administrator to confirm Yes or No.

Standard Account: This type of account has very limited control over the PC and was intended for everyday usage. Similar to Administrator Account, a Standard Account can be a local account or Microsoft account. Standard Users can run apps but can’t install new apps and change system settings that do not affect other users. If any task is performed which requires elevated rights then Windows will display a UAC prompt for the username and password of an administrator account in order to pass through UAC.

Now after installing Windows, you may want to add another user as the Standard account but in future, you may need to change that account type from standard to administrator. So without wasting any time let’s see How to Change User Account Type in Windows 10 from Standard Account to Administrator Account or vice-versa with the help of the below-listed tutorial.

Note: For this, you need to keep at least one administrator account enabled on the PC all the time to perform the below steps.

How to Change User Account Type in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Change User Account Type Using Settings

1.Press Windows Key + I to open Settings then click on Accounts.

2.From the left-hand menu click Family & other people.

3.Now under “Other People” click on your account for which you want to change the account type.

4.Under your account username click on “Change account type“.

5.From the Account type drop-down select either Standard User or Administrator depending on what you want & click Ok.

6.Close Settings then restart your PC to save changes.

This is How to Change User Account Type in Windows 10 but if you still not able to, then follow the next method.

Method 2: Change User Account Type Using Control Panel

1.Type control in Windows Search then click on Control Panel from the search result.

2.Next, click on User Accounts then click “Manage another account“.

3.Click on the account for which you want to change the account type.

4.Now under your account click on “Change the account type“.

5.Select either Standard or Administrator from the account type and click Change Account Type.

This is How to Change User Account Type in Windows 10 using Control Panel.

Method 3: Change User Account Type Using User Accounts

1.Press Windows Key + R then type netplwiz and hit Enter.

2.Make sure to checkmark “Users must enter a user name and password to use this computer” then select the user account for which you want to change the account type and click Properties.

3.Switch to Group Membership tab then either choose Standard user or Administrator according to your preferences.

4.Click Apply followed by OK.

5.Close everything then reboot your PC.

Method 4: Change User Account Type Using Command Prompt

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd to change the account type from Standard User to Administrator and hit Enter:

net localgroup Administrators “Account_Username” /add

Note: Replace Account_Username with the actual userame of the account for which you want to change the type of. You could get the username of the standard accounts using the command: net localgroup users

3.Similarly to change the account type from Administrator to Standard User use the following command:

net localgroup Administrators “Account_Username” /delete
net localgroup Users “Account_Username” /add

Note: Replace Account_Username with the actual userame of the account for which you want to change the type of. You could get the username of the Administrator accounts using the command: net localgroup administrators

4.You could check the type of user accounts using the following command:

net localgroup Users

5.Restart your PC to save changes.

Recommended:

• How to Add a PIN to Your Account in Windows 10
• Rename User Profile Folder in Windows 10
• Find Security Identifier (SID) of User in Windows 10
• How to Add a Picture Password in Windows 10

That’s it you have successfully learned How to Change User Account Type in Windows 10 but if you still have any queries regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• 在Windows 10中禁用User Account Control（UAC）

• 6 Ways至Windows 10至Change User Account Name

• 自动Log在Windows 10中User Account

• 如何在Windows 10 View User Account Details

• 如何在 Windows 10 上创建本地用户帐户

• 漫游用户配置文件在Windows 10中版本控制不兼容问题

• 如何在Windows 10中删除Volume or Drive Partition

• 如何在Windows 10中将Cortana连接到Gmail Account

• 如何在Windows 10中从login screen中删除已删除的User Account

• 在安装Windows 10 Home期间或之后创建本地Account

• 如何在Windows 10中注销其他用户

• 如何在Windows 10中添加PIN至Account

• 如何创建Windows 10 Account Using Gmail

• 在Windows 10中启用或禁用Login Screen上的Administrator Account

• 修复我们不能在Windows 10上Sign Into Your Account Error

• Link Microsoft Account至Windows 10 Digital License

• 不要在Windows 10上使用Temporary Profiles登录用户

• 在Windows 10中启用或禁用内置Administrator Account

• 如何在PC上更改NAT Type（Windows 10）

• 3 Ways在Windows 10中杀死A Process