在 Windows 10 中更改驱动器号的 3 种方法： ^{(3 Ways to Change Drive Letter in Windows 10: )}当您重新安装 Windows 或首次启动 PC 时，您会注意到您的所有驱动器或卷默认情况下都是由Windows 10分配的驱动器号，将来您可能会想要更改这些字母，在这篇文章中，我们将介绍如何做到这一点。即使您连接了诸如硬盘或简单USB等外部驱动器，您也会注意到Windows 10会自动为这些连接的驱动器分配一个驱动器号。

Windows的过程非常简单，它通过从 A 到 Z 的字母表进行，以将可用的驱动器号分配给已连接的设备。但是有一些字母是例外的，例如 A 和 B 是为软盘驱动器保留的，而驱动器号 C 只能用于安装了Windows的驱动器。无论如何^(Anyway)，不​​要浪费任何时间，让我们在下面列出的教程的帮助下看看如何^(How)在Windows 10中更改驱动器号。^{(Drive Letter)}

在Windows 10中更改驱动器^{(Drive Letter)}号的3种方法^(Ways)

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：如何使用磁盘管理更改 Windows 10 中的驱动器号^{(Method 1: How to Change Drive Letter in Windows 10 using Disk Management)}

1.按 Windows 键 + R 然后键入diskmgmt.msc并按 Enter 打开磁盘管理。^{(Disk Management.)}

2.现在右键单击^{(right-click on the drive)}要更改驱动器号的驱动器，然后从上下文菜单中选择“更改驱动器号和路径”。^{(Change Drive letters and Paths)}

3.在下一个屏幕上，选择当前分配的驱动器号，然后单击“更改^(Change)”按钮。

4.确保选择或选中“分配以下驱动器^{(Assign the following drive letter)}号”，然后选择^{(select any available drive letter)}要为驱动器分配的任何可用驱动器号，然后单击“确定”。^(OK.)

5.单击是^(Yes)确认您的操作。

6.完成后，您可以关闭磁盘管理^{(Disk Management)}。

方法 2：如何在命令提示符中更改驱动器号^{(Method 2: How to Change Drive Letter in Command Prompt)}

1.按Windows Key + X然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

2.在cmd中输入^(Enter)以下命令并在每个命令后按Enter：

diskpart
list volume（记下要更改驱动器号的卷号）
select volume #（将＃替换为上面记下的数字）

assign letter=new_drive_letter（将^(Replace)new_Drive_letter 替换为您要使用的实际驱动器号，例如 assign letter=G）

注意：^(Note:)如果您选择了已分配的驱动器号或驱动器号不可用，那么您将收到指示相同的错误消息，再次使用不同的驱动器号为您的驱动器成功分配新的驱动器号。

3.完成后，您可以关闭命令提示符。

方法 3：如何使用注册表编辑器在 Windows 10 中更改驱动器号^{(Method 3: How to Change Drive Letter in Windows 10 using Registry Editor)}

1.按 Windows 键 + R 然后键入regedit并按 Enter 打开注册表编辑器。^{(Registry Editor.)}

2.导航到以下注册表项：

HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices

3.确保选择MountedDevices，然后在右侧窗格中右键单击要更改驱动器的驱动器号（例如：“F”）的二进制（REG_BINARY）值^{( binary (REG_BINARY) value)}（例如：“DosDevicesF：”）字母并选择重命名^(Rename)。

4.现在只用可用的驱动器号重命名上述二进制^(Binary)值的驱动器号部分。“ \DosDevices\G: ” 然后按 Enter。

5.关闭注册表编辑器^{(Registry Editor)}并重新启动您的 PC。

受到推崇的：^{(Recommended:)}

• 如何在 Windows 10 中更改显示器刷新率^{(How to Change Monitor Refresh Rate in Windows 10)}
• 如何修复 Windows 10 中模糊应用的缩放^{(How to Fix Scaling for Blurry Apps in Windows 10)}
• 启用或禁用域用户使用生物识别登录 Windows 10^{(Enable or Disable Domain Users Sign in to Windows 10 Using Biometrics)}
• 如何在 Windows 10 中更改驱动器图标^{(How to Change Drive Icon in Windows 10)}

就是这样，您已经成功学习了如何在 Windows 10 中更改驱动器号，^{(How to Change Drive Letter in Windows 10)}但是如果您对本教程仍有任何疑问，请随时在评论部分提出。

3 Ways to Change Drive Letter in Windows 10

3 Ways to Change Drive Letter in Windows 10: When you re-install Windows or have started your PC for the first time, you will notice that all your drives or volumes are by default assigned drive letter by Windows 10, well in future you might want to change these letter and in this post we will cover how to do that. Even when you connect an external drive such as hard disk, or a simple USB, you will notice that Windows 10 will automatically assign a drive letter to these connected drives.

The process of Windows is quite simple, it progresses through the alphabet from A to Z to assign the available drive letters to devices as connected. But there are some letters which are exceptions such as A & B are reserved for floppy drives, whereas the drive letter C can only be used for the drive which has Windows installed on it. Anyway, without wasting any time let’s see How to Change Drive Letter in Windows 10 with the help of the below-listed tutorial.

3 Ways to Change Drive Letter in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: How to Change Drive Letter in Windows 10 using Disk Management

1.Press Windows Key + R then type diskmgmt.msc and hit Enter to open Disk Management.

2.Now right-click on the drive for which you want to change the drive letter for and then select “Change Drive letters and Paths” from the context menu.

3.On the next screen, select the currently assigned drive letter then click on the “Change” button.

4.Make sure to select or check “Assign the following drive letter” then select any available drive letter you want to assign for your drive and click OK.

5.Click Yes to confirm your actions.

6.Once finished, you can close Disk Management.

Method 2: How to Change Drive Letter in Command Prompt

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd and hit Enter after each one:

diskpart
list volume (Note down the number of the volume for which you want to change the drive letter for)
select volume # (Replace the # with the number which you noted above)

assign letter=new_drive_letter (Replace new_Drive_letter with actual drive letter which you want to use for example assign letter=G)

Note: If you selected an already assigned drive letter or the drive letter is not available then you will receive the error message indicating the same, again use a different drive letter to successfully assign a new drive letter for your drive.

3.Once finished, you can close the command prompt.

Method 3: How to Change Drive Letter in Windows 10 using Registry Editor

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices

3.Make sure to select MountedDevices then in right window pane right-click on the binary (REG_BINARY) value (ex: “\DosDevices\F:”) for the drive letter (ex: “F”) of the drive you want to change the drive letter for and select Rename.

4.Now rename only the drive letter part of the above Binary value with an available drive letter for example. “\DosDevices\G:” and hit Enter.

5.Close Registry Editor and reboot your PC.

Recommended:

• How to Change Monitor Refresh Rate in Windows 10
• How to Fix Scaling for Blurry Apps in Windows 10
• Enable or Disable Domain Users Sign in to Windows 10 Using Biometrics
• How to Change Drive Icon in Windows 10

That’s it you have successfully learned How to Change Drive Letter in Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• 2 Ways至Windows 10中的Map Network Drive

• 如何在Windows 10中删除或Hide Drive Letter

• 如何在Windows 10中删除Volume or Drive Partition

• 3 Ways至Windows 10中的Increase Dedicated VRAM

• 3 Ways在Windows 10中杀死A Process

• 3 Ways检查Windows 10中的Graphics Card

• 3 Ways检查Windows 10是否已激活

• Copy Paste无效Windows 10？ 8 Ways修复它！

• 在 Windows 10 中关闭粘滞键的 3 种方法

• 6 Ways删除Windows 10中的Stuck Print Job

• 如何创建Windows 10 Bootable USB Flash Drive

• 18 Ways优化Windows 10进行游戏

• 6 Ways至Windows 10至Change User Account Name

• 6 Ways在Windows 10中切换User

• 15 Ways加快慢速Windows 10 PC

• 3 Ways在Windows 10中更改Cursor Thickness

• 在 Windows 10 上修复无声音的 8 种方法

• 4 Ways至Windows 10上的View Saved WiFi Passwords

• 5 Ways至Adjust Screen Brightness Windows 10

• 4 Ways至Windows 10上的Disable Automatic Updates