刷新率是您的显示器每秒^(Rate)可以显示的帧数，简而言之，它是您的显示器每秒更新新信息的次数。刷新率^{(refresh rate)}的度量单位是赫兹，使用高刷新率^{(refresh rate)}实际上会使文本在显示屏上更清晰或可见。使用低刷新率^{(refresh rate)}会使显示屏上的文字和图标^{(text and icons)}变得模糊^{(display blurry)}，这会使您的眼睛疲劳并让您头疼。

如果您在玩游戏或只是使用任何图形密集型软件时遇到屏幕闪烁或定格动画效果等问题，那么它可能与您的显示器刷新率^{(Monitor Refresh Rate)}有关。现在考虑如果您的显示器的刷新率^{(refresh rate)}为 60Hz（这^(Which)是笔记本电脑的默认值），那么这意味着您的显示器可以每秒更新 60 帧，这非常好。

如果您的显示器刷新率^{(Refresh Rate)}设置为低于 60Hz，您需要确保将其设置为 60Hz，以避免您可能会或可能不会遇到的任何问题，具体取决于您的使用情况。在旧版本的Windows中，^(Windows)更改监视器刷新率^{(Change Monitor Refresh Rate)}更容易，因为它位于控制面板^{(Control Panel)}中，但在Windows 10中，您需要在设置应用程序^{(Settings App)}中执行所有操作。无论如何^(Anyway)，不​​要浪费任何时间，让我们在下面列出的教程的帮助下看看如何^(How)在Windows 10中更改监视器刷新率。^{(Change Monitor Refresh Rate)}

如何在Windows 10中更改^{(Windows 10)}显示器刷新率^{(Monitor Refresh Rate)}

确保^(Make)创建一个还原点^{(restore point)} 以防万一^{(case something)}出现问题。

1. 按Windows Key + I 打开设置^(Settings)，然后单击系统。^{( System.)}

2. 从左侧菜单^{(left-hand menu)}中，确保选择显示。^(Display.)

3. 现在向下滚动到底部，然后单击“高级显示设置^{(Advanced display settings)}”。

注意：^(Note:)如果您的 PC 连接了多个显示器，请确保选择要更改刷新率^{(Refresh Rate)}的显示器。从 Windows build 17063 开始，您可以跳过此步骤^{(Starting with Windows build 17063, you can skip this step)}，直接进入下面的步骤。

4. 接下来，您将在此处看到连接到 PC 的所有显示器及其完整信息，包括刷新率。^{(Refresh Rate.)}

5. 确定要更改刷新率^{(Refresh Rate)}的显示器后，单击显示器信息下方的“ ^{(display information)}Display adapter properties for Display # ”链接。

6. 在打开切换到监视器选项卡的窗口中。^{(Monitor tab.)}

7. 现在在监视器设置下，从下拉列表中选择^{(select the)} 屏幕刷新率。^{(Screen Refresh Rate from the drop-down.)}

8. 单击应用，然后单击确定^(OK)以保存更改。

注意：^(Note:)您将有 15 秒的时间选择保留更改或恢复^{(Keep Changes or Revert)}，然后它会自动恢复到之前的屏幕刷新率^{(screen refresh)} 或显示模式^{(rate or display mode)}。

9. 如果要选择具有屏幕刷新率的^{(Screen Refresh Rate)}显示模式^{(Display Mode)}，则需要再次单击“ Display adapter properties for Display # ”链接。

10. 现在在适配器选项卡^{(Adapter tab)}下，单击底部的“列出所有模式”按钮。^{(List All Modes)}

11. 根据您的规格，根据屏幕分辨率和屏幕速率选择显示模式^{(screen resolution and screen rate)}，^{(Display mode)}然后单击确定。

12.如果您对当前的刷新率或显示模式^{(rate or display mode)}感到满意，请单击“保留更改^{(Keep changes)}”，否则请单击“恢复”。^(Revert.)

13.完成后关闭所有内容并重新启动您的PC。

推荐的：^{(Recommended:)}

• 在Windows 10中启用或禁用磁盘^(Disk)写保护^{(Write Protection)}
• ^{(Set Disk Quota Limit and Warning Level)}在Windows 10中^{(Windows 10)}设置磁盘配额限制和警告级别
• 在Windows 10中启用或禁用磁盘写入缓存^{(Disk Write Caching)}
• 防止硬盘在^{(Prevent Hard Disk)}Windows 10中进入睡眠状态

就是这样，您已经成功学习了如何在 Windows 10 中更改监视器刷新率，^{(How to Change Monitor Refresh Rate in Windows 10)}但是如果您对本教程仍有任何疑问，请随时在评论部分提出。

How to Change Monitor Refresh Rate in Windows 10

Refresh Rate is the number оf frames per second your monitor can display, in short, it’s the number of times yoυr monitor updates with new information еvеry second. The measurement unit of refresh rate iѕ hertz, and usіng high refresh rаte will actually make text clearеr or visible on display. Using a low refrеsh rate will make the text and icons on display blurry, which will strain your eyes and give you headaches.

If you’re facing issues such as screen flickering or stop-motion effect while playing games or simply using any graphic intensive software, then there is a chance that it’s associated with your Monitor Refresh Rate. Now consider if your monitor’s refresh rate is 60Hz (Which is the default for laptops), then it means that your monitor can update the 60 frames per second, which is very good.

If your Refresh Rate for a display is set lower than 60Hz, you need to make sure t set it to 60Hz to avoid any issues you might or might not face depending upon your usage. In older versions of Windows, it was easier to Change Monitor Refresh Rate as it was located inside Control Panel, but with Windows 10 you need to do everything inside Settings App. Anyway, without wasting any time, let’s see How to Change Monitor Refresh Rate in Windows 10 with the help of the below-listed tutorial.

How to Change Monitor Refresh Rate in Windows 10

Make sure to create a restore point just in case something goes wrong.

1. Press Windows Key + I to open Settings then click on System.

2. From the left-hand menu, make sure to select Display.

3. Now scroll down to bottom then click on “Advanced display settings“.

Note: If you have more than one display connected to your PC, make sure to select the display you want to change the Refresh Rate. Starting with Windows build 17063, you can skip this step and directly go to below one.

4. Next, here you would see all the display connected to your PC and their complete information, including the Refresh Rate.

5. Once you are sure of the display for which you want to change Refresh Rate, click on “Display adapter properties for Display #” link below the display information.

6. In the window which opens the switch to the Monitor tab.

7. Now under Monitor Settings, select the Screen Refresh Rate from the drop-down.

8. Click Apply, followed by OK to save changes.

Note: You will have 15 seconds to select Keep Changes or Revert before it automatically reverts to the previous screen refresh rate or display mode.

9. If you want to select a Display Mode with Screen Refresh Rate, you need to again click on the “Display adapter properties for Display #” link.

10. Now under Adapter tab, click on “List All Modes” button at the bottom.

11. Select a Display mode according to the screen resolution and screen rate according to your specifications and click OK.

12.If you’re satisfied with the current refresh rate or display mode, click Keep changes otherwise click on Revert.

13. Once finished close everything and restarted your PC.

Recommended:

• Enable or Disable Write Protection for Disk in Windows 10
• Set Disk Quota Limit and Warning Level in Windows 10
• Enable or Disable Disk Write Caching in Windows 10
• Prevent Hard Disk from going to Sleep in Windows 10

That’s it you have successfully learned How to Change Monitor Refresh Rate in Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• Windows 10上的Fix Generic PnP Monitor Problem

• 如何在Windows 10校准您的Monitor Display Color

• 如何在Windows 10上使用Performance Monitor（Detailed GUIDE）

• 如何在 Windows 10 中检查显示器型号

• 如何在 Windows 10 上设置 Rainmeter 双显示器皮肤

• 如何在Windows 10上共享Setup Network Files

• 如何在Windows 10中使用Fn Key Lock

• 如何在Windows 10中创建System Image Backup

• 如何禁用Windows 10 Firewall

• 禁用Windows 10中的夹夹Zoom Feature

• 在Windows 10中添加Printer [指南]

• 强制清除Windows 10中的Print Queue

• Windows 10中的Fix Task Host Window Prevents Shut Down

• 3 Ways至Windows 10中的Increase Dedicated VRAM

• Mouse在Windows 10连接时禁用Touchpad

• 在Windows 10中启用或禁用内置Administrator Account

• 在Windows 10中创建Full System Image Backup [终极指南]

• Windows 10缺少Fix VCRUNTIME140.dll

• 如何在Windows 10上运行JAR Files

• Fix Computer Wo在Windows 10中没有转到Sleep Mode