磁盘写入缓存^{(Disk Write Caching)}是一项功能，其中数据写入请求不会立即发送到硬盘，而是缓存到快速易失性内存 ( RAM ) 中，然后从队列中发送到硬盘。使用磁盘写入缓存^{(Disk Write Caching)}的好处是它允许应用程序通过将数据写入请求临时存储到RAM而不是磁盘来更快地运行。因此，提高系统性能^{(system performance)}但使用磁盘写入缓存^{(Disk Write Caching)}也可能由于断电^{(power outage)}或其他硬件故障而导致数据丢失或损坏。^{(loss or corruption)}

数据损坏或丢失^{(corruption or loss)}的风险是真实存在的，因为在通过将数据写入磁盘来刷新数据之前，临时存储在RAM上的数据可能会在^(RAM)电源或系统故障^{(power or system failure)}的情况下丢失。为了更好地理解磁盘写入缓存^{(Disk Write Caching)}是如何工作的，请考虑这个例子，假设您想在单击Save时将^(Save)文本文件^{(text file)}保存在桌面上，Windows会临时将您想要在磁盘上保存文件的信息保存到RAM中，稍后Windows会将此文件写入硬盘。文件写入磁盘后，缓存将向Windows发送确认^(Windows)之后，来自RAM的信息将被刷新。

磁盘写入缓存^{(Disk Write Caching doesn)}实际上并没有将数据写入它有时会发生的磁盘，但磁盘写入缓存^{(Disk Write Caching)}只是信使。所以现在您知道使用磁盘写入缓存^{(Disk Write Caching)}相关的优势和风险了。因此，不要浪费任何时间，让我们^{(time let)}看看如何在下面列出的教程的帮助下在Windows 10中启用或^{(Windows 10)}禁用磁盘写入缓存。^{(Disable Disk Write Caching)}

在Windows 10中启用或禁用磁盘写入缓存^{(Disk Write Caching)}

确保^(Make)创建一个还原点^{(restore point)} 以防万一^{(case something)}出现问题。

方法一：在 Windows 10 中启用磁盘写入缓存^{(Method 1: Enable Disk Write Caching in Windows 10)}

1. 按 Windows 键 + R 然后键入devmgmt.msc并按 Enter。

2. 展开磁盘驱动器^{(Disk drives)}，然后双击要启用磁盘写入缓存的磁盘驱动器。^{(double-click on the disk drive you want to enable the Disk Write Caching.)}

注意：^(Note:)或者您可以右键单击同一驱动器并选择属性。

3. 确保切换到策略选项卡^{(Policies tab)}，然后选中^(checkmark)“在设备上启用写入缓存^{(Enable write caching on the device)}”，然后单击确定。

注意：^(Note:) 根据您的选择，在写入缓存策略下选中^(Check)或取消选中“关闭^(Turn)设备上的Windows 写入缓存缓冲区刷新”。^{(Windows write-cache)}但为防止数据丢失，请勿勾选此政策，除非您的设备连接了单独的电源^{(power supply)}（例如：UPS）。

4. 单击是^(Yes)重新启动您的 PC 以保存更改。

方法 2：在 Windows 10 中禁用磁盘写入缓存^{(Method 2: Disable Disk Write Caching in Windows 10)}

1. 按 Windows 键 + R 然后键入devmgmt.msc并按 Enter。

2. 展开磁盘驱动器，然后双击要启用磁盘写入缓存的磁盘驱动器。^{( double-click on the disk drive you want to enable the Disk Write Caching.)}

3. 确保切换到策略选项卡^{( Policies tab)}，然后取消选中^(uncheck)“在设备上启用写入缓存^{(Enable write caching on the device)}”，然后单击确定。

4. 单击是确认重新启动您的 PC。

推荐的：^{(Recommended:)}

• 如何在Windows 10中格式化^{(Windows 10)}磁盘或驱动器^{(Disk or Drive)}
• ^{(Set Disk Quota Limit and Warning Level)}在Windows 10中^{(Windows 10)}设置磁盘配额限制和警告级别
• 如何在Windows 10中将^{(Windows 10)}GPT 磁盘^{(GPT Disk)}转换为MBR 磁盘^{(MBR Disk)}
• 防止硬盘在^{(Prevent Hard Disk)}Windows 10中进入睡眠状态

就是这样，您已经成功学习了如何在 Windows 10 中启用或禁用磁盘写入缓存，^{(How to Enable or Disable Disk Write Caching in Windows 10)}但是如果您对本教程仍有
任何疑问，请随时在评论部分提出。

Enable or Disable Disk Write Caching in Windows 10

Diѕk Write Caching is a feature where data write-requests аre not immediately sent to the hard disk, and they are cached into faѕt volatile memory (RAM) and later sеnt to hard disk from the queue. The benefit of using Disk Write Caching is that it allows the application to run faster by temporarily storіng the dаta wrіte-requests to RAM rather than the disk. Thus, increasing thе ѕystem performance but using Disk Write Caching can also lead to data loss or corruption due to power outage or another hardware failure.

The risk of data corruption or loss is real, as the data which is temporarily stored on the RAM might get lost in case of power or system failure before the data is flushed by writing it to the disk. To better understand how Disk Write Caching works consider this example, suppose you want to save a text file on the desktop when you click Save, Windows will temporarily save the information that you want to save the file on the disk into RAM and later Windows will write this file to hard disk. Once the file is written to the disk, the cache will send an acknowledgement to Windows and after which the information from the RAM will be flushed.

Disk Write Caching doesn’t actually write the data to the disk it sometimes occurs after but Disk Write Caching is only the messenger. So now you are aware of the advantages and risk associated with using Disk Write Caching. So without wasting any time let’s see How to Enable or Disable Disk Write Caching in Windows 10 with the help of the below-listed tutorial.

Enable or Disable Disk Write Caching in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Enable Disk Write Caching in Windows 10

1. Press Windows Key + R then type devmgmt.msc and hit Enter.

2. Expand Disk drives, then double-click on the disk drive you want to enable the Disk Write Caching.

Note: Or you can right-click on the same drive and select Properties.

3. Make sure to switch to Policies tab then checkmark “Enable write caching on the device” and click OK.

Note: Check or uncheck “Turn off Windows write-cache buffer flushing on the device” under Write-caching policy according to your choice. But to prevent data loss, do not checkmark this policy unless you have a separate power supply (ex: UPS) connected to your device.

4. Click on Yes to reboot your PC to save changes.

Method 2: Disable Disk Write Caching in Windows 10

1. Press Windows Key + R then type devmgmt.msc and hit Enter.

2. Expand Disk drives, then double-click on the disk drive you want to enable the Disk Write Caching.

3. Make sure to switch to Policies tab then uncheck “Enable write caching on the device” and click OK.

4. Click Yes to confirm to restart your PC.

Recommended:

• How to Format a Disk or Drive in Windows 10
• Set Disk Quota Limit and Warning Level in Windows 10
• How to Convert GPT Disk to MBR Disk in Windows 10
• Prevent Hard Disk from going to Sleep in Windows 10

That’s it you have successfully learned How to Enable or Disable Disk Write Caching in Windows 10 but if you still have
any questions regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• 在 Windows 10 中启用或禁用磁盘写保护

• 在Windows 10中使用Diskpart Clean Command清洁Disk

• Windows 10中的Fix Microsoft Compatibility Telemetry High Disk Usage

• 4 Ways至Windows 10中的Run Disk Error Checking

• Windows 10的Fix High CPU and Disk usage problem

• Windows 10中Fix Unable至Delete Temporary Files

• 如何在Windows 10中删除Volume or Drive Partition

• 在 Windows 10 中启用或禁用强制磁盘配额限制

• 3 Ways在Windows 10中杀死A Process

• 在Windows 10 Lock Screen上启用或禁用Cortana

• 如何防止硬盘在 Windows 10 中进入睡眠状态

• Windows 10中的Mouse Pointer Lags [已解决]

• 3 Ways至Windows 10中的Increase Dedicated VRAM

• 在 Windows 10 中将 MBR 转换为 GPT 磁盘而不会丢失数据

• 如何在Windows 10中创建Password Reset Disk

• 如何在 Windows 10 中使用磁盘清理

• 如何在Windows 10中更改Screen Brightness

• 如何在Windows 10中使用Fn Key Lock

• Windows 10中的Fix Black Desktop Background

• 如何在 Windows 10 中将 GPT 磁盘转换为 MBR 磁盘