启用或禁用域用户使用生物识别登录 Windows 10： ^{(Enable or Disable Domain Users Sign in to Windows 10 Using Biometrics: )}虽然Windows 10非常安全，因为它允许您使用PIN、密码^(Password)或图片密码^(Password)登录Windows ，但您始终可以通过启用添加额外的安全层内置指纹读取器^{(fingerprint reader)}。但是您的 PC 必须配备指纹读取器^{(fingerprint reader)}，以便您利用这一额外的安全层。使用生物识别^(Biometrics)的好处是你的指纹是独一无二的，所以没有暴力攻击^{(force attack)}的机会，它比记住密码等^{(password etc)}更容易。

您可以使用任何生物识别技术（例如您的面部、虹膜或指纹）登录您的设备、应用程序、在线服务等，前提是您的设备具有设备制造商内置的这些功能。无论如何^(Anyway)，不​​要浪费任何时间，让我们^{(time let)}看看如何启用或禁用域用户^{(Disable Domain Users)}使用生物识别登录^(Sign)Windows 10。

启用或禁用域用户使用生物^(Using)识别登录^(Sign)Windows 10

确保^(Make)创建一个还原点^{(restore point)} 以防万一^{(case something)}出现问题。

方法 1：在本地组策略中启用或禁用域用户使用生物识别登录 Windows 10^{(Method 1: Enable or Disable Domain Users Sign in to Windows 10 Using Biometrics in Local Group Policy)}

注意：^(Note:)此方法不适用于Windows 10 家庭版用户^{(Home Edition Users)}，此方法仅适用于Windows 10 专业版^(Pro)、教育^(Education)版和企业版用户^{(Enterprise Edition Users)}。

1.按 Windows 键 + R 然后键入gpedit.msc并按 Enter 打开本地组策略。^{(Local Group Policy.)}

2.从左侧窗格^{(side pane)}导航到以下路径：

Computer Configuration > Administrative Templates > Windows Components > Biometrics

3.确保选择生物识别^{( Biometrics)}，然后在右侧窗格中双击^{(window pane double-click)}“允许域用户使用生物识别登录^{(Allow domain users to log on using biometrics)}”策略。

4.现在根据您的选择更改上述策略设置：^{(above policy)}

启用域用户使用生物识别登录到 Windows 10：未配置或启用^{(Enable Domain Users Sign in to Windows 10 Using Biometrics: Not Configured or Enabled)}
禁用域用户使用生物识别登录到 Windows 10：禁用^{(Disable Domain Users Sign in to Windows 10 Using Biometrics: Disabled)}

注意：未配置^(Configured)是默认设置^{(default setting)}。

5.单击应用，然后单击确定。

6.完成后，关闭所有内容，然后重新启动 PC 以保存更改。

方法 2：启用或禁用域用户在注册表编辑器中使用生物识别登录到 Windows 10^{(Method 2: Enable or Disable Domain Users Sign in to Windows 10 Using Biometrics in Registry Editor)}

1.按 Windows 键 + R 然后键入regedit并按 Enter 打开注册表编辑器。^{(Registry Editor.)}

2.导航到以下注册表项^{(registry key)}：

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Biometrics\Credential Provider

3.右键单击凭据提供程序^{(Credential Provider)}，然后选择 New > DWORD (32-bit) Value.

4.将此新创建的 DWORD 命名为域帐户^{(DWORD as Domain Accounts)}，然后按 Enter。

5.双击Domain Accounts DWORD并根据以下内容更改其值：

0 = Disable Domain Users Sign in to Windows 10 Using Biometrics
1 = Enable Domain Users Sign in to Windows 10 Using Biometrics

6.完成后，单击“确定”关闭上述对话框，^{(above dialog box)}然后重新启动 PC。

推荐的：^{(Recommended:)}

• 在Windows 10中启用或禁用磁盘^(Disk)写保护^{(Write Protection)}
• 如何在Windows 10中更改^{(Windows 10)}显示器刷新率^{(Monitor Refresh Rate)}
• 在Windows 10中启用或禁用磁盘写入缓存^{(Disk Write Caching)}
• 防止硬盘在^{(Prevent Hard Disk)}Windows 10中进入睡眠状态

就是这样，您已经成功学习了如何使用生物识别技术启用或禁用域用户登录到 Windows 10，^{(How to Enable or Disable Domain Users Sign in to Windows 10 Using Biometrics)}但是如果您对本教程仍有任何疑问，请随时在评论部分询问他们。

Enable or Disable Domain Users Sign in to Windows 10 Using Biometrics

Enable or Disable Domain Users Sign in to Windows 10 Using Biometrics: Although Windows 10 is pretty secure as it gives you the option to sign into Windows using a PIN, Password, or Picture Password but you can always add an extra layer of security by enabling the built-in fingerprint reader. But your PC must have come with the fingerprint reader in order for you to take the benefit of this extra layer of security. The benefit of using Biometrics is that your fingerprints are unique so no chance of brute force attack, it’s easier than remembering password etc.

You can use any Biometrics such as your face, iris, or fingerprint to sign in to your device, apps, online services etc provided your device comes with these features built-in by the manufacturer of your device. Anyway, without wasting any time let’s see How to Enable or Disable Domain Users to Sign in to Windows 10 using Biometrics.

Enable or Disable Domain Users Sign in to Windows 10 Using Biometrics

Make sure to create a restore point just in case something goes wrong.

Method 1: Enable or Disable Domain Users Sign in to Windows 10 Using Biometrics in Local Group Policy

Note: This method will not work for Windows 10 Home Edition Users, this method is only for Windows 10 Pro, Education, and Enterprise Edition Users.

1.Press Windows Key + R then type gpedit.msc and hit Enter to open Local Group Policy.

2.Navigate to the following path from the left-hand side pane:

Computer Configuration > Administrative Templates > Windows Components > Biometrics

3.Make sure to select Biometrics then in right window pane double-click on “Allow domain users to log on using biometrics” policy.

4.Now to change the above policy settings according to your choice:

Enable Domain Users Sign in to Windows 10 Using Biometrics: Not Configured or Enabled
Disable Domain Users Sign in to Windows 10 Using Biometrics: Disabled

Note: Not Configured is the default setting.

5.Click Apply followed by OK.

6.Once finished, close everything then reboot your PC to save changes.

Method 2: Enable or Disable Domain Users Sign in to Windows 10 Using Biometrics in Registry Editor

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Biometrics\Credential Provider

3.Right-click on Credential Provider then select New > DWORD (32-bit) Value.

4.Name this newly created DWORD as Domain Accounts and hit Enter.

5.Double-click on Domain Accounts DWORD and change its value according to:

0 = Disable Domain Users Sign in to Windows 10 Using Biometrics
1 = Enable Domain Users Sign in to Windows 10 Using Biometrics

6.Once finished, click OK to close the above dialog box then restart your PC.

Recommended:

• Enable or Disable Write Protection for Disk in Windows 10
• How to Change Monitor Refresh Rate in Windows 10
• Enable or Disable Disk Write Caching in Windows 10
• Prevent Hard Disk from going to Sleep in Windows 10

That’s it you have successfully learned How to Enable or Disable Domain Users Sign in to Windows 10 Using Biometrics but if you still have any queries regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• 如何创建Windows 10 Account Using Gmail

• 修复我们不能在Windows 10上Sign Into Your Account Error

• 禁用Windows 10中的夹夹Zoom Feature

• 在Windows 10中创建Full System Image Backup [终极指南]

• 如何在Windows 10中创建System Image Backup

• Fix Alt+Tab不在Windows 10工作

• 如何在Windows 10中使用Fn Key Lock

• 在Windows 10中添加Printer [指南]

• USB Device不在Windows 10工作[求助]

• 在Windows 10中更改Operating Systems的Time至Display List Startup

• 如何在PC上更改NAT Type（Windows 10）

• Control Panel在Windows 10中的Hide Items

• 如何在Windows 10中删除Volume or Drive Partition

• 如何在Windows 10上共享Setup Network Files

• Windows 10缺少Fix VCRUNTIME140.dll

• 如何完全从Windows 10卸载McAfee

• 在Windows 10 Lock Screen上启用或禁用Cortana

• Windows 10中的Defer Feature and Quality Updates

• Mouse在Windows 10连接时禁用Touchpad

• 在Windows 10中启用或禁用内置Administrator Account