如果您遇到此错误，那么您将无法访问您尝试访问的网站，因为DNS 查找^{(DNS lookup)}失败因此出现错误。所以DNS ( Domain Name Server ) 的功能是将IP 地址^{(IP address)}解析为域名^{(domain name)}，如果由于某种原因此过程失败，那么您将看到 dns_probe_finished_bad_config 错误。

此错误并不意味着您将无法访问其他网页。尽管如此，它也不能保证这一点，因此很大程度上取决于用户的系统配置^{(system configuration)}，为什么他们的系统上会出现错误“DNS Probe Finished Bad Config”。无论如何，不​​要浪费任何时间，让我们看看如何使用下面列出的故障排除步骤来修复此错误。

dns_probe_finished_bad_config 错误^{(dns_probe_finished_bad_config error)}[已解决]

确保^(Make)创建一个还原点^{(restore point)} 以防万一^{(case something)}出现问题。

方法一：重启路由器^{(Method 1: Restart your Router)}

有时可以通过重新启动Wifi 调制解调器或路由器^{(Wifi modem or router)}并再次尝试访问之前显示错误“DNS Probe Finished Bad Config”的页面来解决此错误，并且如果您能够访问该网站，那么您的错误就会得到解决，但如果不是那么继续。

Method 2: Flush DNS and Reset TCP/IP

1.右键单击Windows按钮^{(Windows Button)}并选择“命令提示符（管理员^(Admin)）。”

2. 现在输入以下命令并在每个命令后按 Enter ：^{(command and press Enter)}

ipconfig /release
ipconfig /flushdns
ipconfig /renew

3.再次^(Again)，打开Admin Command Prompt并键入以下内容，然后在每个之后按回车：

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

4. 重新启动以应用更改。刷新DNS^(DNS)似乎可以修复dns_probe_finished_bad_config错误。^{(Fix dns_probe_finished_bad_config error.)}

方法 3：更改 DNS 设置^{(Method 3: Change DNS Settings)}

这里的重点是，您需要将DNS设置为自动检测IP 地址^{(IP address)}或设置您的ISP提供的^(ISP)自定义地址^{(custom address)}。 修复未设置任何设置时出现的dns_probe_finished_bad_config 错误。^{(Fix dns_probe_finished_bad_config error)}在这种方法中，您需要将您计算机的DNS 地址^{(DNS address)}设置为Google DNS 服务器^{(Google DNS server)}。请按照给定的步骤执行此操作：

1. 右键单击​​任务栏面板^{(taskbar panel)}右侧的网络图标^{(Network icon)}。现在单击打开^(Open)网络和共享中心^{(Network & Sharing Center)} 选项。

2. 当网络和共享中心^{(Network and Sharing Center )}窗口打开时，在此处单击当前连接的网络。^{( click on the currently connected network here.)}

3. 点击已连接网络^{(connected network)}，会弹出WiFi状态窗口。^{(WiFi status)}单击^(Click)属性^{(Properties )}按钮。

4.弹出属性窗口^{(property window)}时， 在 Networking 部分搜索Internet Protocol Version 4 (TCP/IPv4)双击它。

5. 现在新窗口将显示您的DNS设置为自动输入还是手动输入。在这里，您必须单击使用以下 DNS 服务器地址^{(Use the following DNS server addresses)}选项。并在输入部分^{(input section)}填写给定的DNS 地址^{(DNS address)}：

8.8.8.8
8.8.4.4

6. 选中退出时验证设置^{(Validate settings upon exit)} 框，然后单击确定。

现在关闭所有窗口并启动Chrome以检查您是否能够修复 dns_probe_finished_bad_config 错误。^{( Fix dns_probe_finished_bad_config error.)}

方法 4：禁用防火墙和防病毒^{(Method 4: Disabling Firewall and Antivirus)}

有时防病毒程序^{(Antivirus program)}会导致dns_probe_finished_bad_config 错误，^{(dns_probe_finished_bad_config error,)} 并验证这里不是这种情况。您需要在有限的时间内禁用您的防病毒软件，以便您可以检查当防病毒软件关闭时错误是否仍然出现。

1. 右键单击​​系统托盘中的防病毒程序图标^{( Antivirus Program icon)}并选择禁用。^(Disable.)

2. 接下来，选择防病毒软件将保持禁用^{( Antivirus will remain disabled.)}的时间范围。^{(time frame)}

注意：选择尽可能短的时间，例如 15 分钟或 30 分钟。

3. 完成后，再次尝试连接以打开Google Chrome并检查错误是否解决。

4.从开始菜单搜索栏搜索^{(Start Menu search bar and click)}控制面板^{(control panel)}，点击打开 控制面板。^{( Control Panel.)}

5. 接下来，单击系统和安全，^{( System and Security)}然后单击Windows 防火墙。^{(Windows Firewall.)}

6. 现在从左侧窗格中单击^{(left window pane click)}打开或关闭 Windows 防火墙。^{( Turn Windows Firewall on or off.)}

7.选择关闭 Windows 防火墙并重新启动您的 PC。^{(Select Turn off Windows Firewall and restart your PC.)}

再次尝试打开Google Chrome并访问之前显示Aw Snap 错误 的^{(Aw Snap error. )}网页。^{(web page)}如果上述方法^{(method doesn)}不起作用，请按照相同的步骤重新打开您的防火墙。^{( turn on your Firewall again.)}

方法五：清除浏览器缓存^{(Method 5: Clear Browser’s Cache)}

1. 首先，点击浏览器窗口^{(browser window)}右上角^{(right corner)}的三个点^{(three dots)}，然后选择设置^{( select Settings)}。您还可以在 URL 栏中键入chrome://settings  。

2. 当设置选项卡^{(Settings tab)}打开时，滚动到底部并展开高级设置^{( Advanced Settings)}部分。

3. 在高级部分^{(Advanced section)}下，找到隐私和安全部分下的清除浏览数据选项。^{(Clear browsing data)}

4. 点击清除浏览数据^{(Clear browsing data)}选项并在时间范围^{(Time range)}下拉菜单中选择“所有时间”。^{(All time)}选中所有框，然后单击清除数据^{(Clear Data)} 按钮。

清除浏览数据后，关闭并重新启动Chrome 浏览器^{(Chrome browser)}，查看错误是否消失。

方法六：使用 Chome 清理工具^{(Method 6: Use Chome Cleanup Tool)}

官方的 Google Chrome 清理工具^{( Google Chrome Cleanup Tool)} 有助于扫描和删除可能导致 chrome 出现问题的软件，例如崩溃、异常的启动页面或工具栏、您无法摆脱的意外广告或以其他方式改变您的浏览体验。

推荐的：^{(Recommended:)}

• ^{(Fix Error Code 0x8007000D)}尝试激活 Windows 时修复错误代码 0x8007000D
• 如何修复应用程序错误 523
• 如何修复 502 Bad Gateway 错误
• 修复 应用程序无法正确初始化

就是这样，您已成功修复 dns_probe_finished_bad_config 错误，^{(Fix dns_probe_finished_bad_config error,)}但如果您对本指南仍有任何疑问，请随时在评论部分询问。

dns_probe_finished_bad_config error [SOLVED]

If yoυ are facing this error, then you won’t be able to visit the website which yоu are trying to access becausе DNS lookup has failed hence the error. So the function of DNS (Domain Name Serνer) is to resolve an IP address to the domain name, and if for some reason this process fails then you will see dns_probe_finished_bad_config error.

This error doesn’t mean you won’t be able to access other web pages. Still, it also doesn’t guarantee this, so it depends on a lot on users system configuration as to why the error ‘DNS Probe Finished Bad Config’ is occurring on their system. Anyway, without wasting any time, let’s see how to fix this error with the below-listed troubleshooting steps.

dns_probe_finished_bad_config error [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Method 1: Restart your Router

Sometimes this error can be resolved by restarting your Wifi modem or router and again trying to visit the page earlier showing the error ‘DNS Probe Finished Bad Config’ and if you’re able to access the website than your error is resolved but if not then continue.

Method 2: Flush DNS and Reset TCP/IP

1. Right-click on Windows Button and select “Command Prompt(Admin).”

2. Now type the following command and press Enter after each one:

ipconfig /release
ipconfig /flushdns
ipconfig /renew

3. Again, open Admin Command Prompt and type the following and hit enter after each one:

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

4. Reboot to apply changes. Flushing DNS seems to Fix dns_probe_finished_bad_config error.

Method 3: Change DNS Settings

The point here is, you need to set the DNS to automatically detect IP address or set a custom address given by your ISP. Fix dns_probe_finished_bad_config error arises when neither of the settings has been set. In this method, you need to set your computer’s DNS address to the Google DNS server. Follow the given steps to do so:

1. Right-click the Network icon available on the right side of your taskbar panel. Now click on the Open Network & Sharing Center option.

2. When the Network and Sharing Center window opens, click on the currently connected network here.

3. When you click on the connected network, the WiFi status window will pop up. Click on the Properties button.

4. When the property window pops up, search for Internet Protocol Version 4 (TCP/IPv4) in the Networking section. Double click on it.

5. Now the new window will show if your DNS is set to automatic or manual input. Here you have to click on the Use the following DNS server addresses option. And fill the given DNS address on the input section:

8.8.8.8
8.8.4.4

6. Check the Validate settings upon exit box and click OK.

Now close all windows and launch Chrome to check if you’re able to Fix dns_probe_finished_bad_config error.

Method 4: Disabling Firewall and Antivirus

Sometimes the Antivirus program can cause dns_probe_finished_bad_config error, and to verify this is not the case here. You need to disable your antivirus for a limited time so that you can check if the error still appears when the antivirus is off.

1. Right-click on the Antivirus Program icon from the system tray and select Disable.

2.  Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible, for example, 15 minutes or 30 minutes.

3. Once done, again try to connect to open Google Chrome and check if the error resolves or not.

4. Search for the control panel from the Start Menu search bar and click on it to open the Control Panel.

5. Next, click on System and Security then click on Windows Firewall.

6. Now from the left window pane click on Turn Windows Firewall on or off.

7. Select Turn off Windows Firewall and restart your PC.

Again try to open Google Chrome and visit the web page, which was earlier showing the Aw Snap error. If the above method doesn’t work, please follow the same steps to turn on your Firewall again.

Method 5: Clear Browser’s Cache

1. First, click on the three dots on the top right corner of the browser window and select Settings. You can also type chrome://settings in the URL bar.

2. When the Settings tab opens, scroll to the bottom and expand the Advanced Settings section.

3. Under the Advanced section, find the Clear browsing data option under Privacy and security section.

4. Click on the Clear browsing data option and select “All time” in the Time range dropdown. Check all the boxes and click on Clear Data button.

When the browsing data is cleared, close, and relaunch the Chrome browser and see if the error is gone.

Method 6: Use Chome Cleanup Tool

The official Google Chrome Cleanup Tool helps in scanning and removing software’s that may cause the problem with chrome such as crashes, unusual startup pages or toolbars, unexpected ads you can’t get rid of, or otherwise changing your browsing experience.

Recommended:

• Fix Error Code 0x8007000D when trying to activate Windows
• How to Fix Application Error 523
• How to fix 502 Bad Gateway Error
• Fix The application failed to initialize properly

That’s it you have successfully Fix dns_probe_finished_bad_config error, but if you still have any queries regarding this guide, then please feel free to ask them in the comment’s section.

Related posts

• Fix Google Chrome已停止工作错误[已解决]

• Chrome上的ERR_SSL_VERSION_OR_CIPHER_MISMATCH [解决]

• Fix SSL Certificate Error在Google Chrome [已解决]

• Fix Youtube在Chrome上没有工作问题[已解决]

• Chrome Wo未打开或启动[已解决]

• Windows 10创作者Update installation卡住[已解决]

• Microsoft Edge Ca未使用内置管理员帐户打开[已解决]

• antimalware服务可执行的高CPU使用率[已解决]

• Windows 10缺少Fix MSVCR120.dll [已解决]

• 触摸板在 Windows 10 中不起作用 [已解决]

• Airplane Mode未在Windows 10中关闭[已解决]

• Display driver停止响应并恢复错误[已解决]

• USB 端口在 Windows 10 中不工作 [已解决]

• 鼠标和键盘在 Windows 10 中不起作用 [已解决]

• 您当前的安全设置不允许下载此文件 [已解决]

• 该文件对于目标文件系统来说太大 [已解决]

• Windows 资源管理器已停止工作 [已解决]

• Windows无法完成extraction error [已解决]

• Microsoft Virtual Wifi Miniport Adapter driver问题[解决]

• [已解决] 找不到服务器 DNS 地址错误