当电子设备因故障、充电缓慢、卡屏(screen freeze)等情况而崩溃时,建议您重置设备以解决此类异常功能。与任何其他设备一样,Kindle Fire问题也可以通过重置来恢复。您可以选择软重置或硬重置,或恢复出厂设置。
软重置基本上类似于重新启动系统。这将关闭所有正在运行的应用程序并刷新设备。
恢复出厂设置(Factory reset)通常是为了删除与设备相关的全部数据。因此(Hence),该设备之后需要重新安装所有软件。它使设备功能(device function)像新设备一样新鲜。它通常在设备软件更新时执行。
当设备设置因功能不当而需要更改时,通常会执行硬重置。它会删除存储在硬件中的所有内存并使用最新版本进行更新。
注意:(Note: )任何重置后,与设备关联的所有数据都会被删除。因此,建议您在进行重置之前备份所有文件。
如何软和硬重置 Kindle Fire(How to Soft and Hard Reset Kindle Fire )
如何软重置 Kindle Fire?
当Kindle Fire死机时,解决此问题的最佳方法是软重置它。请按照以下说明进行操作:
1. 第一步是通过同时按住电源(Power )和音量调低(Volume down )按钮将Kindle Fire设置为关闭状态。(OFF)
2. Kindle Fire关闭后(OFF),将手从按钮上移开并等待(wait)一段时间。
3. 最后,按住电源键(Power button )一会重启。
现在,Kindle Fire 已开启,Kindle Fire的(ON,)软(Kindle Fire)重置完成。
这类似于重新启动设备以修复小故障。
如何软重置 Kindle Fire HD 和 HDX(Soft Reset Kindle Fire HD and HDX)(第一(First)代至第四代(Fourth Generation))
1.按住电源(Power )按钮约 20 秒,关闭(OFF) Kindle Fire HD 和 HDX 。(Kindle Fire HD and HDX)注意:这样做时忽略屏幕上弹出的提示。(Note: Ignore the prompts popping up on the screen while doing so.)
2. Kindle Fire 关闭后,松开(release)按钮并等待一段时间。
3. 最后,按住电源按钮(Power button.)打开(ON)Kindle Fire 。
建议仅在软重置无法解决问题时才选择硬重置。继续阅读以了解如何硬重置Kindle fire。
如何硬重置 Kindle Fire?
在开始硬重置过程之前,强烈建议:
一种。确保备份所有数据和媒体文件。(data and media files)这将防止数据丢失。
湾。确保设备至少剩余30% 的电池电量。(battery charge)
另请阅读:购买(Also Read:)亚马逊消防电视(Amazon Fire TV) 棒(Stick) 之前应该知道的 6 件事
如何硬重置 Kindle Fire(第 1代和第 2代型号)
对于第 1代和第2代型号,只需单击 5(Generation Models)次即可完成硬重置。请按照以下步骤操作:
1. 第一步是点击齿轮(gear )图标,进入设置(Settings)。
2. 单击名为“更多... ”的选项(More…)
3. 接下来,单击设备。(Device.)
4. 在这里,单击标题为“重置为出厂默认设置”的选项。(Reset to Factory Defaults.)
5. 单击此按钮,以下屏幕将显示擦除所有内容(Erase everything)的选项。点击它。
Kindle Fire 将进入硬重置模式(hard reset mode)。等到(Wait)重置完成。检查Kindle Fire现在是否可以正常工作。
如何硬重置 Kindle Fire(第 3至第 7代型号)
方法 1:使用设置和密码(Settings & Password)硬重置(Reset)
1. 第一步是进入设置菜单(Settings menu)。当您从顶部向下滑动屏幕时,它会显示出来。点击(Click)设置(Settings ),如下图。
2. 在设置选项卡(Settings tab)下,单击查看设备选项。(Device Options. )
3. 在这里,单击重置为出厂默认设置。(Reset to Factory Defaults. )这将从您的文件中删除所有个人数据和下载的内容。
4. 当你点击它时,屏幕上会出现一个提示。它将要求您确认继续“重置(Reset)为出厂默认设置”。单击“重置(Reset )”按钮确认提示,如下所示。
5. 当您点击重置时,(Reset, )屏幕将关闭(OFF),Kindle Fire将进入重置模式。
等待(Wait)该过程完成并检查Kindle Fire是否正常工作。
另请阅读:(Also Read:)如何重置您的 Android 手机
方法2:无密码硬重置(Reset Without Password)
如果您丢失或忘记了锁屏密码(lock screen password),您将无法访问Kindle Fire并通过设置选项硬重置它。但是,您可以使用以下步骤在没有密码的情况下硬重置Kindle Fire :
1.第一步是关闭(OFF) Kindle Fire。这可以通过按住电源(Power )按钮直到您在屏幕上看到电源关闭(OFF) 提示来完成。(prompt)单击OK(OK)确认提示。
2. 关机后同时按住电源(OFF)+音量(Power )下键(Volume down )。10 到 15 秒后,亚马逊标志(Amazon logo)将出现在屏幕上。
如果Power + Volume down 按钮不起作用,请尝试Power + Volume up 按钮。现在将显示亚马逊徽标。(Amazon logo)
3. 一段时间后,标志消失,亚马逊系统恢复屏幕(Amazon System Recovery Screen)将显示。
4. 在此屏幕上,您将看到一个标题为擦除数据和恢复出厂设置的选项。(wipe data and factory reset. )使用降低音量按钮导航到此选项。
5.使用电源按钮单击擦除数据和恢复出厂设置选项。(wipe data and factory reset )
6. 在下一页上,您将看到一个标记为是的选项 — 删除所有用户数据。(Yes — delete all user data. )使用降低音量按钮导航到此选项。
7. 单击电源(Power)按钮开始对Kindle Fire进行硬重置。
随着Kindle Fire(Kindle Fire)进入重置模式,屏幕会在一段时间后关闭。等待(Wait)该过程完成并检查Kindle Fire问题是否已解决。如果您忘记了密码,此方法将非常有用。
推荐的:(Recommended:)
- 如何硬重置任何 Android 设备(Hard Reset Any Android Device)
- 修复多个正在运行的 Google Chrome 进程(Fix Multiple Google Chrome Processes Running)
- 如何硬和软重置 Roku
- 如何在 PC 上使用会所
我们希望本文对您有所帮助,并且您能够对 Kindle Fire 进行软硬重置( Soft and Hard Reset Kindle Fire)。如果您有任何疑问,请通过下面的评论部分与我们联系。
How to Soft and Hard Reset Kindle Fire
When an eleсtronic devіce cоllapses dυe to conditions like malfunctioning, slow charging, or screen freеze, you are recommended to reset your device to solve such abnormal functions. Like аny оther device, Kindle Fire issues can аlso be restored by resetting them. You can either opt for a ѕoft reset or a hard reset, or a factory reset.
A soft reset is basically similar to rebooting the system. This will close all the running applications and will refresh the device.
Factory reset is usually done to remove the entire data associated with the device. Hence, the device would need re-installation of all of the software afterward. It makes the device function fresh like that of a new one. It is usually carried out when a device’s software gets updated.
A hard reset is usually carried out when device settings need to be altered due to improper functionality. It deletes all the memory stored in the hardware and updates it with the latest version.
Note: After any reset, all the data associated with the device gets deleted. Therefore, it is recommended to back up all the files before you undergo a reset.
How to Soft and Hard Reset Kindle Fire
How to Soft Reset Kindle Fire?
When Kindle Fire freezes, the best way to sort this issue is to soft reset it. Follow the instructions given below to do so:
1. The first step is to turn Kindle Fire to OFF state by simultaneously holding the Power and Volume down buttons.
2. Once Kindle Fire is turned OFF, take your hand away from the buttons and wait for some time.
3. Finally, hold the Power button for a while to restart it.
Now, Kindle Fire is turned ON, and the soft reset of Kindle Fire is complete.
This is similar to restarting the device to fix minor glitches.
How to Soft Reset Kindle Fire HD and HDX (First to Fourth Generation)
1. Turn OFF Kindle Fire HD and HDX by pressing the Power button for about 20 seconds. Note: Ignore the prompts popping up on the screen while doing so.
2. Once Kindle Fire is turned OFF, release the button and wait for some time.
3. Finally, turn Kindle Fire ON by holding the Power button.
It is advised to opt for a hard reset only when the soft reset does not resolve it. Continue reading to learn how to hard reset Kindle fire.
How to Hard Reset Kindle Fire?
Before beginning the process for hard reset, it is highly recommended to:
a. make sure that all the data and media files are backed up. This will prevent the loss of data.
b. ensure that the device has at least 30% of battery charge left.
Also Read: 6 Things You should know Before You Buy an Amazon Fire TV Stick
How to Hard Reset Kindle Fire (1st and 2nd Generation Models)
For 1st and 2nd Generation Models, a hard reset can be done in 5 simple clicks. Follow the steps mentioned below:
1. The first step is to click the gear icon and enter it into Settings.
2. Click the option called More…
3. Next, click on Device.
4. Here, click on the option titled Reset to Factory Defaults.
5. By clicking this, the following screen will display an option to Erase everything. Click on it.
Kindle Fire will enter the hard reset mode. Wait until the reset is complete. Check if Kindle Fire works fine now.
How to Hard Reset Kindle Fire (3rd to 7th Generation Models)
Method 1: Hard Reset using Settings & Password
1. The first step is to enter the Settings menu. It is made visible when you swipe down the screen from the top. Click on Settings as shown below.
2. Under the Settings tab, click to see Device Options.
3. Here, click on Reset to Factory Defaults. This will remove all personal data and downloaded content from your file.
4. When you click on it, a prompt will appear on the screen. It will ask you for confirmation to proceed with “Reset to Factory Defaults.” Confirm the prompt by clicking on the Reset button, as shown below.
5. When you click on Reset, the screen will turn OFF, and Kindle Fire will enter reset mode.
Wait for the process to finish and check if Kindle Fire works properly.
Also Read: How to Reset Your Android Phone
Method 2: Hard Reset Without Password
If you have lost or forgotten the lock screen password, you will not be able to access Kindle Fire and hard reset it through the settings option. However, you can hard reset Kindle Fire without a password by using the following steps:
1. The first step is to turn OFF Kindle Fire. This can be done by holding the Power button until you see a power OFF prompt on the screen. Confirm the prompt by clicking OK.
2. Hold the Power + Volume down buttons simultaneously after the device is turned OFF. After 10 to 15 seconds, the Amazon logo will appear on the screen.
If the Power + Volume down button does not work, try Power + Volume up buttons. The Amazon logo will be displayed now.
3. After some time, the logo disappears, and the Amazon System Recovery Screen will be displayed.
4. On this screen, you will see an option titled wipe data and factory reset. Navigate to this option by using the Volume down button.
5. Click on the wipe data and factory reset option by using the Power button.
6. On the next page, you will see an option marked Yes — delete all user data. Navigate to this option by using the Volume down button.
7. Click on the Power button to start a hard reset of Kindle Fire.
The screen will turn OFF after some time as Kindle Fire enters into reset mode. Wait for the process to get completed and check if Kindle Fire issues are solved. This method will be extremely helpful if you can’t remember your password.
Recommended:
We hope this article was helpful and you were able to Soft and Hard Reset Kindle Fire. If you have any queries, reach out to us through the comments section below.