因为我在 IT 部门工作,所以我最终会收到很多与技术支持有关的问题,例如如何解冻或重置我的 iPod( how do I unfreeze or reset my iPod)设备!我不知道为什么最近有这么多人问我这个问题,但既然他们是这样,我想我会写一篇关于如果你的 iPod 冻结了如何去重置你的快速帖子!
当然,告诉你如何重置 iPod Nano可能对某些人有用,但对那些拥有 iPod Touch的人来说并不奏效,所以我会尽可能多地列出说明!开始了!另外需要注意的是,如果重置过程不起作用,您也可以尝试将设备连接到电源(power source),然后重试。
解冻或重置 iPod Touch
iPod Touch非常简单。iPod Touch(Touch)上只有两个按钮,所以真的很难搞砸。要重置 iPod Touch,请同时按住Sleep/Wake按钮和主(Home)屏幕按钮,直到您看到Apple 标志(Apple logo)出现在屏幕上:
请注意,您可能首先会在屏幕上看到“滑动关闭”选项,但这没关系。按住(Keep)这两个按钮,然后 iPod Touch将完全关闭。然后只需再次按下Sleep/Wake button几秒钟即可将其重新打开。
另一件需要注意的是,这与重置 iPhone 或 iPad 的过程相同。
解冻或重置 iPod Classic
1.打开和关闭Hold开关。(将其滑动到Hold,然后再次将其关闭。)
2. 现在按住菜单(Menu)和选择(Select)按钮,直到出现Apple 标志(Apple logo),这可能需要大约 6 到 10 秒。您可能需要重复此步骤。
笔记:(Notes:)
- 如果您在重置 iPod 时遇到问题,请继续将其放在平坦的表面上。然后确保按下选择按钮的手指没有接触到点(Select)按轮(click wheel)的任何部分。还要确保您将菜单按钮按在(Menu button)点击轮(click wheel)的外侧,而不是靠近中心。
- 如果上述步骤不起作用,那么您可以尝试将 iPod 连接到电源适配器(power adapter)并将电源适配器(power adapter)插入电源插座,或者将 iPod 连接到计算机。确保(Make)计算机已打开且未设置(t set)为进入睡眠状态。
重置 iPod Nano(第 6 代和第 7 代)
对于较新的 iPod Nano型号,该过程略有不同。让我们从第 6代 iPod (generation iPod) Nano开始,如下图所示:
要重置第 6代 iPod (generation iPod) Nano,您必须同时按住Sleep/Wake按钮和降低音量(Volume Down)按钮至少 8 秒。对于 iPod Nano 第 7(Nano 7th)代,如下所示,您必须按下Sleep/Wake按钮和主页(Home)按钮,直到屏幕变黑。
重置 iPod Nano(第 1、第 2、第 3、第 4 和第 5 代)
重置 iPod Nano与重置iPod Classic 的方式类似:
1.打开和关闭Hold开关。(将其滑动到Hold,然后再次将其关闭。)
2. 现在按住菜单(Menu)和选择(Select)按钮,直到出现Apple 标志(Apple logo),这可能需要 6 到 10 秒。您可能需要多次执行此步骤。
您也可以按照上述步骤重置 iPod Mini 。
重置或解冻 iPod Shuffle
iPod Shuffle(Shuffle)设计有 4 代,因此请参考上图查看您必须移动的开关。以下是步骤:
1.首先(First),从 iTunes 中弹出您的iPod shuffle(如果已连接)。
2. 然后从USB 基座(USB dock)中取出iPod shuffle。
3. 将iPod shuffle(iPod shuffle)顶部或侧面的开关移至关闭位置(off)。当您看不到绿色条纹时,您知道您处于关闭位置。
4. 等待 5 秒。如果您有第 3 代或第 4代 iPod (generation iPod) Shuffle,请等待 10 秒钟。
5. 将开关移回打开位置,以便在任一位置都可以看到绿色条纹。
就是这样!希望(Hopefully),既然您知道了这些步骤,您就不必一直取出电池来解冻您的 iPod!任何意见或问题,请务必写在下面!享受!
How to Reset or Unfreeze an iPod Nano, iPod Touch, iPod Classic, or iPod Shuffle
Because I wоrk in IT, I end up getting a lot of questions that deal with technical suppоrt, such as how do I unfreeze or reset my iPod device! I’m not sure why so many people have been asking me that lately, but since they are, I thought I would write up a quick post on how to go about resetting your iPod if it has frozen up!
Of course, telling you how to reset an iPod Nano may work for some, but not for those who have an iPod Touch, so I’ll try to list out the instructions for as many as I can! Here we go! One other thing to note is that if the resetting procedure does not work, you can also try to connect the device to a power source and then try again.
Unfreeze or Reset an iPod Touch
The iPod Touch is pretty straight-forward. There are only two buttons on an iPod Touch, so it’s really hard to mess this up. To reset an iPod Touch, press and hold the Sleep/Wake button and the Home button at the same time until you see the Apple logo show up on the screen:
Note that you might first see the “Slide to Turn Off” option appear on the screen, but that’s ok. Keep holding the two buttons and then the iPod Touch will turn off completely. Then simply press the Sleep/Wake button again for a few seconds to turn it back on.
Another thing to note is that this is the same procedure for resetting an iPhone or an iPad also.
Unfreeze or Reset an iPod Classic
1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Now press and hold the Menu and Select buttons until the Apple logo appears, which may take about 6 to 10 seconds. You may need to repeat this step.
Notes:
- If you are having problems resetting the iPod, go ahead and set it on a flat surface. Then make sure the finger pressing the Select button is not touching any part of the click wheel. Also be sure that you are pressing the Menu button towards the outside of the click wheel, not near the center.
- If the above mentioned steps do not work, then you can try connecting your iPod to a power adapter and plug the power adapter into an electrical outlet, or connect the iPod to your computer. Make sure the computer is turned on and isn’t set to go to sleep.
Reset an iPod Nano (6th & 7th Generation)
For the newer models of the iPod Nano, the process is slightly different. Let’s start off with the 6th generation iPod Nano, which is shown below:
To reset the 6th generation iPod Nano, you have to hold down the Sleep/Wake button and the Volume Down button at the same time for at least 8 seconds. For the iPod Nano 7th generation, shown below, you have to press Sleep/Wake button and the Home button until the screen goes black.
Reset an iPod Nano (1st, 2nd, 3rd, 4th & 5th Generation)
Resetting an iPod Nano is similar to how you would do it for an iPod Classic:
1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Now press and hold the Menu and Select buttons until the Apple logo appears, which could take from 6 to 10 seconds. You might have to perform this step several times.
You can also reset an iPod Mini in the same way as the above steps.
Reset or Unfreeze an iPod Shuffle
There are 4 generations of iPod Shuffle designs, so refer to the chart above to see the switch you have to move. Here are the steps:
1. First , eject your iPod shuffle from iTunes, if you have it connected.
2. Then remove the iPod shuffle from the USB dock.
3. Move the switch that is on the top or side of the iPod shuffle to the off position. You know you are in the off position when you can’t see the green stripe.
4. Wait 5 seconds. If you have the 3rd or 4th generation iPod Shuffle, wait 10 seconds.
5. Move the switch back to the on position so green stripe will be visible in either position.
And that’s it! Hopefully, now that you know these steps, you don’t have to keep taking out the battery to unfreeze your iPod! Any comments or questions, make sure to write below! Enjoy!