在您玩 Playstation 4 的过程中，您可能会注意到Dualshock 4(Dualshock 4)控制器背面有多种颜色闪烁。其中一些灯可能比其他灯出现得更频繁，但有时并不清楚这些灯试图表明什么，尤其是当它们突然出现时。
这些灯的范围包括指示PS4错误、连接问题、需要充电、标记不同的玩家等。有时，游戏本身会将控制器灯条更改为不同的颜色，只是作为游戏的效果。
例如，如果您在游戏中使用手电筒，开发人员可能已将控制器设置为在这种情况下变成白色。但是，如果您没有玩游戏或者找不到控制器颜色的其他原因，您可以在下面找到每个原因的所有可能原因。
白色闪烁的控制器意味着(White Flashing Controller Means)什么
如果您注意到控制器呈白色闪烁，这可能意味着多种情况，但都不是非常严重。控制器上的
白色闪烁可能意味着：(White)
- 蓝牙或USB连接失败。您需要尝试重置控制器和PS4中的一个或两个。您还需要检查用于将控制器连接到PS4的所有电线。
- 控制器电池电量低。如果白灯闪烁，您可能需要插入控制器并为其充电。如果是这种情况，您还可能会在屏幕上看到电池电量低的指示。要为控制器充电，您需要将USB电缆从控制器背面插入PS4。
如果不是其他原因（例如软件或硬件问题），这两个问题通常都很容易解决。
蓝色闪烁的控制器意味着(Blue Flashing Controller Means)什么
蓝色是使用(Blue)PS4控制器时灯条上最常见的颜色。按下 PS 按钮后，当成功连接到PS4时，它将呈纯蓝色。但是，如果您注意到闪烁的蓝光而不是稳定的蓝光，可能是由于以下原因之一：
- 蓝牙连接失败。这与白色闪烁灯的问题类似，您需要遵循类似的路线来修复它。尝试通过USB(USB)连接、重新启动控制器或重新启动控制台。
- 软件(Software)或硬件问题。这些问题与导致控制器无法连接到控制台的问题有关。这可能意味着您的PS4无法开机，或者主机或控制器上的充电线或USB端口无法正常工作。要解决此问题，请检查所有电缆和端口，然后尝试重置您的PS4。
蓝色闪烁的指示灯可能表示各种连接问题，因此请首先尝试通过侵入性最小的故障排除技术(troubleshooting techniques)来解决此问题。
红色闪烁的控制器意味着什么(Flashing Controller Means)
如果您的控制器呈红色闪烁，这可能表明您的控制器硬件存在更严重的问题。这可能意味着：
- 出现端口、电缆或电池问题。通常，当您尝试为控制器充电时，会出现红灯闪烁，但硬件问题阻止了这种情况。要解决此问题，您可以尝试重置 PS4 控制器(resetting your PS4 controller)。您可以在控制器背面的 L2 按钮附近找到重置按钮。您还可以更换正在使用的电缆或电池。如果您的控制器在插入PS4时继续工作，则表明电池出现故障。
如果更换电缆或电池后控制器仍然无法充电，您可能需要更换控制器本身。此外，您还可以购买底座充电站，以防止损坏端口并不再需要电缆。
橙色闪烁的控制器意味着什么(Flashing Controller Means)
当橙色指示灯闪烁时，表示您的控制器当前正在充电并处于休息模式。当您通过USB插入控制器且电池电量低且您没有主动使用控制器时，就会发生这种情况。
这是一个很好的迹象。如果您在控制器电量不足且已插入电源时看不到它，则意味着您的控制器在休息模式下无法正常充电。(isn’t properly charging)这可能是由于端口或电缆问题造成的。
PS4 控制器(Your PS4 Controller)上闪烁颜色的提示
如果您在玩游戏时注意到上述任何颜色，实际上可能并不表示存在问题。通常，闪烁信号信号问题或其他原因只会在玩游戏之外发生。当游戏中出现不同的灯光颜色时，游戏开发人员更有可能将灯光编程为针对某些动作或序列亮起。例如，如果您在游戏中使用某个动作，可能会导致蓝光闪烁。如果你的健康状况不佳，可能会导致红灯亮起。
控制器上显示不同颜色的另一个原因是当您玩多人游戏并且有多个控制器与 PS4 配对时(PS4)。每种不同颜色的光代表不同的玩家。第一个玩家是蓝色的，第二个是红色的，第三个是绿色的，第四个是粉色的。
了解(Know)为什么您的 PS4控制器(Controller)会闪烁这些灯
在不知道其含义的情况下出现这些闪烁的灯光一开始可能会有点令人担忧。但是，了解它们的含义可以帮助您解决PS4(PS4)或控制器可能发生的任何问题。这可以让您的主机在未来很长一段时间内保持平稳运行。
您的PS4(PS4)控制器上的闪光灯出现过哪些问题？在评论中
告诉我们。(Tell)
Why Your PS4 DualShock Controller Flashes White, Blue, Red, and Orange
During thе time you’ve played your Playstation 4, yoυ’ve lіkely noticed a variety of сolors flashing on the back of your Dualshock 4 controller. Some of them may show up more oftеn than others, but ѕometimes it’s not exactly clear what these lights are trying to indicate, especially if they pop up out of nowhere.
These lights can range from indicating errors with your PS4, problems connecting, needing a charge, marking different players, etc. Sometimes, games themselves will change your controller light bar to different colors simply as an effect for the game.
For example, if you’re using a flashlight in-game, the developers may have set the controller to turn white in this instance. However, if you’re not playing a game or you can’t find another reason for your controller color, below you’ll find all the possible reasons for each one.
What a White Flashing Controller Means
If you’re noticing your controller flashing white, there are a couple things that this could mean, but neither are extremely serious. White flashing on your controller could mean:
- Bluetooth or USB connection has failed. You will want to try resetting either or both your controller and the PS4. You’ll also want to check any wires you may be using to connect your controller to your PS4.
- The controller battery is low. If a white light is flashing, you may need to plug in your controller and charge it. You may also see a low-battery indication on your screen if this is the case. To charge your controller, you’ll need to plug a USB cable from the back of your controller to your PS4.
Both of these issues are typically easy to fix if something else isn’t to blame, such as a software or hardware issue.
What a Blue Flashing Controller Means
Blue is the most common color you’ll see on the light bar when using your PS4 controller. It will be a solid blue color when it is successfully connected to your PS4 after pressing the PS button. However, if you’re noticing a flashing blue light instead of a solid one, it could be for one of these reasons:
- Bluetooth connection failed. This is similar to the issue with a white flashing light, and you’ll want to follow a similar route to fix it. Try connecting via USB, restarting your controller, or restarting the console.
- Software or hardware issues. These will have to do with issues that cause the controller to be unable to connect to the console. This could mean your PS4 won’t turn on, or that the charging cables or USB ports on the console or controller aren’t working properly. To fix this, check all cables and ports, then try resetting your PS4.
A blue flashing light could indicate a variety of issues with connectivity, so go through least-invasive troubleshooting techniques to try and fix this first.
What a Red Flashing Controller Means
If your controller is flashing red, this could indicate a more serious issue with your controller’s hardware. It could mean:
- A port, cable, or battery issue is occurring. Typically a red light flash occurs when you’re trying to charge a controller, but a hardware issue is preventing it. To fix this, you could try resetting your PS4 controller. You can find the reset button near the L2 button on the back of the controller. You could also replace the cable or battery you’re using. You can tell the battery is malfunctioning if your controller continues to work when plugged into the PS4.
If you replace the cable or battery and the controller continues to be unable to charge, you’ll likely need to replace the controller itself. Further, you can also purchase a dock charging station to prevent damage to the port and remove the need for a cable.
What an Orange Flashing Controller Means
When an orange light flash is occurring, it means that your controller is currently charging and in rest mode. This will happen when you plug your controller in via USB and it’s low on battery charge, and you aren’t using the controller actively.
This is a good indication to have. If you don’t see it when your controller is low on battery and plugged in, that means that your controller isn’t properly charging while in rest mode. This could be due to port or cable issues.
Tips for Flashing Colors on Your PS4 Controller
If you notice any of the above colors while playing a game, it may not actually be indicating an issue. Typically flashing lights to signal problems or other reasons will only occur outside of playing a game. When different light colors are popping up while in a game, it’s more likely that the game developers programmed the light to come on for certain actions or sequences. For example, if you use a certain move in a game, it could cause a blue light to flash. If you’re low on health, it could cause a red light.
Another reason that different colors show up on a controller is when you’re playing a multiplayer game and have more than one controller paired with your PS4. Each different color light signifies a different player. The first player will be blue, second will be red, third is green, and fourth is pink.
Know Why Your PS4 Controller is Flashing These Lights
Having these flashing lights occur without knowing their meaning can be a bit worrying at first. However, understanding what they are indicating can help you fix any issue that may be happening with your PS4 or your controller. This can keep your console running smoothly for a long time to come.
What issues have you had with flashing lights on your PS4 controller? Tell us in the comments.
