如果您想以无线方式将您的PC 屏幕^{(PC screen)}镜像到另一台设备（电视、蓝光播放器^{(Blu-ray player)}），您可以使用Mircast 技术^{(Mircast Technology)}轻松实现。该技术可帮助您的 PC、笔记本电脑或平板电脑将屏幕投影到支持Mircast 技术的^{(Mircast technology)}无线设备^{(wireless device)}（电视、投影仪）。这项技术的最佳之处在于它允许发送高达 1080p的高清视频^{(Hd video)}，从而完成工作。

Miracast 要求：^{(Miracast requirements:)}
图形驱动程序必须支持Windows 显示驱动程序模型^{(Windows Display Driver Model)}( WDDM ) 1.3，支持 Miracast^{(Miracast support)}
Wi-Fi 驱动程序必须支持网络驱动程序接口规范^{(Network Driver Interface Specification)}( NDIS ) 6.30 和Wi-Fi Direct
Windows 8.1 或 Windows 10

这几乎没有什么问题，例如兼容性或连接问题^{(compatibility or connection issues)}，但随着技术的发展，这些缺点将早已不复存在。因此，不要浪费任何时间，让我们^{(time let)}在下面列出的教程的帮助下看看如何在Windows 10中使用Miracast连接到^(Miracast)无线显示器。^{(Wireless Display)}

^(Connect)在Windows 10中使用Miracast连接到无线显示器^{(Wireless Display)}

确保^(Make)创建一个还原点^{(restore point)} 以防万一^{(case something)}出现问题。

方法 – 1：如何检查您的设备是否支持 Miracast^{(Method – 1: How to check if Miracast is supported on your device)}

1. 按 Windows 键 + R 然后键入dxdiag并按 Enter。

2. dxdiag 窗口^{(dxdiag window)}打开后，单击底部的“保存所有信息”按钮。^{(Save All Information)}

3. 将出现另存为对话框^{(dialog box)}，导航到要保存文件的位置^{(navigate to where you want to save the file)}，然后单击保存。^(Save.)

4. 现在打开刚刚保存的文件，然后向下滚动并查找 Miracast。^{(look for Miracast.)}

5. 如果您的设备支持Mircast，您将看到如下内容：

Miracast：可用，带 HDCP^{(Miracast: Available, with HDCP)}

6. 关闭一切，您可以继续在Windows 10中设置和使用Micrcast。

方法 – 2：在 Windows 10 中使用 Miracast 连接到无线显示器^{(Method – 2: Connect to a Wireless Display with Miracast in Windows 10)}

1. 按 Windows 键 + A 打开操作中心。^{(Action Center.)}

2. 现在点击连接^{( Connect)}快速操作按钮。

注意：^(Note:)您可以通过按Windows Key + K.直接访问连接屏幕。^{(Connect screen)}

3.等待^(Wait)几秒钟，以便设备配对。单击要投影到的无线显示器。^{(Click on the wireless display you want to project to.)}

4. 如果您想从接收设备控制您的 PC，只需选中^(checkmark)“允许从连接到此显示器的键盘或鼠标输入^{(Allow input from a keyboard or mouse connected to this display)}”。

5. 现在单击“更改投影模式^{(Change projection mode)}”，然后选择以下选项之一：

Duplicate: You’ll see the same things on both screens in Windows 10.
Extend (default) You'll see everything spread over both screens, and you can drag and move items between the two.
Second screen only You’ll see everything on the connected screen. Your other screen will be blank.

6. 如果您想停止投影，只需单击断开连接按钮。^{(Disconnect button.)}

这就是您在不使用任何第三方工具的情况下在 Windows 10 中使用 Miracast 连接到无线显示器的方式。^{(Connect to a Wireless Display with Miracast in Windows 10)}

方法 – 3：将您的 Windows 10 PC 投影到另一台设备^{(Method – 3: Project your Windows 10 PC to another device)}

1. 按Windows Key + K然后点击底部的“投影到这台电脑”链接。^{(Projecting to this PC)}

2. 现在从“始终关闭^{(Always off)}”下拉列表中选择随处可用^{(Available everywhere)}或在安全网络上随处可用。^{(Available everywhere on secure networks.)}

3. 同样，从“ Ask to project to this PC ”下拉菜单中选择First time only或Everytime connection is requested。

4. 确保将“需要 PIN 码进行配对^{(Require PIN for pairing)}”选项切换为关闭。

5.接下来，您可以决定是否只在设备插入时进行投影。

6. 现在，当 Windows 10 弹出另一台设备想要投影到您的计算机的消息时，单击是。^{( Yes)}

7. 最后，Windows 连接^{(Windows connect)}应用程序将启动，您可以在其中拖动、调整大小或最大化窗口。

推荐的：^{(Recommended:)}

• ^(Show)在Windows 10^{(Windows 10)}中以彩色显示压缩或加密文件名^{(Encrypted file)}
• ^{(Zip or Unzip Files)}在Windows 10中^{(Windows 10)}压缩或解压缩文件和文件夹^(Folders)
• ^{(Remove Compatibility Tab)}从Windows 10的^{(Windows 10)}文件^(File) 属性^(Properties)中删除兼容性选项卡
• 如何在Windows 10中更改^{(Windows 10)}计算机名称^{(Computer Name)}

就是这样，您已经成功学习了如何在 Windows 10 中使用 Miracast 连接到无线显示器，^{(How to Connect to a Wireless Display with Miracast in Windows 10)}但如果您对这篇文章仍有任何疑问，请随时在评论部分提问。

Connect to a Wireless Display with Miracast in Windows 10

If you want to mirror уour PC screen to аnother device (TV, Blu-ray player) wirelessly than you can easily do so uѕing Mircast Technology. Thіs technology helps your PC, laptop, or tablet to proјect your screen to the wireless device (TV, projectors) that supports the Mircast technology. The best thing аbout this teсhnology is that it allows sending up to 1080p Hd video which can get thе job done.

Miracast requirements:
Graphics driver must support Windows Display Driver Model (WDDM) 1.3 with Miracast support
Wi-Fi driver must support Network Driver Interface Specification (NDIS) 6.30 and Wi-Fi Direct
Windows 8.1 or Windows 10

There are few problems with this such as compatibility or connection issues but as the technology evolves these shortcomings will long be gone. So without wasting any time let’s see How to Connect to a Wireless Display with Miracast in Windows 10 with the help of the below-listed tutorial.

Connect to a Wireless Display with Miracast in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method – 1: How to check if Miracast is supported on your device

1. Press Windows Key + R then type dxdiag and hit Enter.

2. Once the dxdiag window open, click on “Save All Information” button located at the bottom.

3. The save as dialog box will appear, navigate to where you want to save the file and click Save.

4. Now open the file which you just saved, then scroll down and look for Miracast.

5. If Mircast is supported on your device that you will see something like this:

Miracast: Available, with HDCP

6. Close everything and you can continue to set up and use Micrcast in Windows 10.

Method – 2: Connect to a Wireless Display with Miracast in Windows 10

1. Press Windows Key + A to open Action Center.

2. Now click on Connect quick action button.

Note: You can directly access the Connect screen by pressing Windows Key + K.

3. Wait for a few seconds in order for the device to get paired. Click on the wireless display you want to project to.

4. If you want to control your PC from the receiving device simply checkmark “Allow input from a keyboard or mouse connected to this display“.

5. Now click “Change projection mode” and then choose one of the below options:

Duplicate: You’ll see the same things on both screens in Windows 10.
Extend (default) You'll see everything spread over both screens, and you can drag and move items between the two.
Second screen only You’ll see everything on the connected screen. Your other screen will be blank.

6. If you want to stop projecting then simply click on Disconnect button.

And this is how you Connect to a Wireless Display with Miracast in Windows 10 without using any third-party tools.

Method – 3: Project your Windows 10 PC to another device

1. Press Windows Key + K then click on “Projecting to this PC” link at the bottom.

2. Now from the “Always off” drop-down select Available everywhere or Available everywhere on secure networks.

3. Similarly from “Ask to project to this PC” drop-down select First time only or Everytime connection is requested.

4. Make sure to toggle “Require PIN for pairing” option to OFF.

5. Next, you can decide if you want to only project when the device is plugged in or not.

6. Now click Yes when Windows 10 pops up a message that another device wants to project to your computer.

7. Finally, the Windows connect app will launch where you could drag, resize or maximize the window.

Recommended:

• Show Compressed or Encrypted file names in color in Windows 10
• Zip or Unzip Files and Folders in Windows 10
• Remove Compatibility Tab from File Properties in Windows 10
• How to Change Computer Name in Windows 10

That’s it you have successfully learned How to Connect to a Wireless Display with Miracast in Windows 10 but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• 在Windows 10中更改Operating Systems的Time至Display List Startup

• 修复远程桌面不会在Windows 10中Connect

• 如何在Windows 10校准您的Monitor Display Color

• Fix Miracast无效Windows 10

• 如何在Windows 10上设置和Use Miracast？

• 如何在Windows 10中使用Fn Key Lock

• 如何在Windows 10中启用或Disable Emoji Panel

• USB Device不在Windows 10工作[求助]

• 如何在Windows 10中创建System Image Backup

• Fix Wireless Mouse不适用于Windows 10

• 如何使用 Miracast 从 Windows 10 移动版投影到电视或显示器

• 如何完全从Windows 10卸载McAfee

• Control Panel在Windows 10中的Hide Items

• 在Windows 10 Lock Screen上启用或禁用Cortana

• 强制清除Windows 10中的Print Queue

• Fix Function键无效Windows 10

• 如何在Windows 10启用有源Directory

• 在Windows 10中添加Printer [指南]

• 如何在Windows 10中Fix Corrupted Registry

• Fix Keyboard未在Windows 10中键入