在 Windows 10 中使用 Diskpart Clean 命令清理磁盘： ^{(Clean Disk using Diskpart Clean Command in Windows 10: )}由于数据损坏或任何其他问题，几乎我们所有人都经历过 SD 卡或外部存储设备在连接到 PC 时无法工作，甚至格式化设备似乎也无法解决问题. 好吧，如果您遇到类似的问题，那么您可以随时使用DiskPart工具来格式化您的设备，它可能会再次开始工作。为此，不应对设备造成任何物理或硬件损坏，并且即使Windows无法识别该设备，也必须在^(Windows)命令提示符^{(Command Prompt)}中识别该设备。

好吧，DiskPart是Windows内置的命令行实用程序，它允许您通过在^(Windows)命令提示符^{(Command Prompt)}处使用直接输入来管理存储设备、分区和卷。DiskPart有很多功能，比如Diskpart可用于将基本磁盘转换为动态磁盘、将动态磁盘转换为基本磁盘、清理或删除任何分区、创建分区等。但在本教程中，我们只对DiskPart “ Clean”命令擦除磁盘，使其未分配且未初始化，因此让我们看看如何在 Windows 10 中使用 Diskpart Clean 命令清洁磁盘。^{(How to Clean Disk using Diskpart Clean Command in Windows 10.)}

在MBR^(MBR)分区（主引导记录^{(Master Boot Record)}）上使用“ Clean ”命令时，它只会覆盖MBR分区和隐藏扇区信息，另一方面，在GPT分区（GUID分区表）上使用“ ^(GUID)Clean ”命令时，它会覆盖包括保护 MBR的^{(Protective MBR)}GPT分区，并且没有关联的隐藏扇区信息。Clean命令的唯一缺点是它只会将磁盘上的数据标记为删除，而不会安全地擦除磁盘。为了安全地擦除磁盘上的所有内容，您应该使用“ Clean全部”命令。

现在“清理所有”命令与“^(Clean)清理^(Clean)”命令执行相同的操作，但它确保擦除磁盘的每个扇区，从而完全删除磁盘上的所有数据。请注意，当您使用“全部清除^(Clean)”命令时，磁盘上的数据是不可恢复的。因此，不要浪费任何时间，让我们在下面列出的教程的帮助下，看看如何在Windows 10中使用Diskpart Clean 命令^{(Diskpart Clean Command)}清理^(Clean) 磁盘。^(Disk)

在Windows 10中使用Diskpart Clean 命令^{(Diskpart Clean Command)}清理磁盘^(Disk)

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

1.按 Windows 键 + X 然后选择命令提示符（管理员）。^{( Command Prompt (Admin).)}

2.连接您要清理的驱动器或外部设备。^{(Connect the drive or external device which you want to clean.)}

3.在 cmd 中键入以下命令并按Enter：

磁盘部分^(diskpart)

4.现在我们需要获取所有可用驱动器的列表，^{(list of all the drive available)}然后键入以下命令并按Enter：

列出磁盘^{(list disk)}

注意：^(Note:)仔细确定要清理的磁盘的磁盘号。例如，您需要查看驱动器的大小，然后确定要清理的驱动器。如果您错误地选择了任何其他驱动器，则所有数据都将被清除，因此请小心。

确定要清理的磁盘的正确磁盘编号的另一种方法是使用磁盘管理^{(Disk Management)}，只需按Windows Key + R，然后键入diskmgmt.msc并按Enter。现在记下要清理的磁盘的磁盘号。

5.接下来需要在diskpart中选择磁盘：

select disk #

注意：^(Note:) 将^(Replace)# 替换为您在步骤 4 中标识的实际磁盘编号。

6.键入以下命令清理磁盘并按Enter：

干净的^(clean)

或者

清理所有^{(clean all)}

注意：^(Note:) Clean命令将快速完成驱动器的格式化，而“ Clean all”命令每 320 GB 大约需要一个小时才能完成运行，因为它会执行安全擦除。

7.现在我们需要创建一个分区，但在此之前确保使用以下命令仍然选择磁盘：

列出磁盘^{(list disk)}

注意：^(Note:)如果驱动器仍被选中，您会注意到磁盘旁边有一个星号 (*)。

8.要创建主分区，您需要使用以下命令：

创建分区主^{(create partition primary)}

9.在 cmd 中键入以下命令并按Enter：

选择分区 1^{(select partition 1)}

10.您需要将分区设置为活动：

积极的^(active)

11.现在需要将分区格式化为NTFS并设置标签：

format FS=NTFS label=any_name quick

注意：^(Note:) 将^(Replace)any_name 替换为您想要命名驱动器的任何名称。

12.键入以下命令以分配驱动器号并按 Enter：

assign letter=G

注意：^(Note:) 确保^(Make)字母 G 或您选择的任何其他字母未被任何其他驱动器使用。

13.最后，键入exit 关闭DiskPart和命令提示符。

受到推崇的：^{(Recommended:)}

• 在 Windows 10 中读取 Chkdsk 的事件查看器日志^{(Read Event Viewer Log for Chkdsk in Windows 10)}
• 如何在 Windows 10 中取消计划的 Chkdsk^{(How To Cancel a Scheduled Chkdsk in Windows 10)}
• 在 Windows 10 中运行磁盘错误检查的 4 种方法^{(4 Ways to Run Disk Error Checking in Windows 10)}
• 在 Google Chrome 中备份和恢复您的书签^{(Back Up And Restore Your Bookmarks in Google Chrome)}

就是这样，您已经成功学习了如何在 Windows 10 中使用 Diskpart Clean 命令清洁磁盘，^{(How to Clean Disk using Diskpart Clean Command in Windows 10)}但是如果您对本教程仍有任何疑问，请随时在评论部分提出。

Clean Disk using Diskpart Clean Command in Windows 10

Clean Disk using Diskpart Clean Command in Windows 10: Almost all of us have gone through SD card or external storage device not working when connected to PC because of data corruption or any other issue and even formatting the device doesn’t seem to fix the issue. Well, if you are facing a similar issue then you could always use DiskPart tool to format your device and it might start working again. For this to work there should not be any physical or hardware damage to the device and also the device must be recognized in Command Prompt even though if it’s not recognized by Windows.

Well, DiskPart is a command-line utility that comes inbuilt in Windows and it allows you to manage storage devices, partitions, and volumes by using direct input at the Command Prompt. There are many features of DiskPart like Diskpart can be used to convert a basic disk to a dynamic disk, convert dynamic disk to a basic disk, clean or delete any partitions, create partitions, etc. But in this tutorial, we are only interested in the DiskPart “Clean” command which wipes a disk leaving it unallocated and not initialized, so let’s see How to Clean Disk using Diskpart Clean Command in Windows 10.

When using the “Clean” command on MBR partition (Master Boot Record), it will only overwrite the MBR partitioning and hidden sector information and on the other hand when using the “Clean” command on GPT partition (GUID partition table) then it will overwrite GPT partitioning including the Protective MBR and there is no hidden sector information associated. The only drawback of the Clean command is that it only marks the data on the disk delete but will not securely erase the disk. In order to securely erase all the content from the disk, you should use “Clean all” command.

Now the “Clean all” command does the same thing as “Clean” command but it makes sure to wipe each and every sector of the disk which completely deletes all the data on the disk. Do note that when you use “Clean all” command then the data on the disk is unrecoverable. So without wasting any time let’s see How to Clean Disk using Diskpart Clean Command in Windows 10 with the help of the below-listed tutorial.

Clean Disk using Diskpart Clean Command in Windows 10

Make sure to create a restore point just in case something goes wrong.

1.Press Windows Key + X then select Command Prompt (Admin).

2.Connect the drive or external device which you want to clean.

3.Type the following command into cmd and hit Enter:

diskpart

4.Now we need to get a list of all the drive available and for that type the following command and hit Enter:

list disk

Note: Carefully identify the disk number of the disk you want to clean. For example, you need to see the size of the drive then decide which is the drive you want to clean. If by mistake you selected any other drive then all the data will be wiped clean, so be careful.

Another way to identify the correct disk number of the disk you want to clean is to use Disk Management, just press Windows Key + R then type diskmgmt.msc and hit Enter. Now note down the disk number of the disk which you want to clean.

5.Next, you need to select the disk in diskpart:

select disk #

Note: Replace # with the actual disk number which you identify in step 4.

6.Type the following command to clean the disk and press Enter:

clean

OR

clean all

Note: Clean command will quickly finishing formatting your drive while “Clean all” command will take about an hour per 320 GB to finish running since it performs a secure erase.

7.Now we need to create a partition but before that ensure that the disk is still selected using the following command:

list disk

Note: If the drive still selected, You will notice an asterisk (*) next to the disk.

8.To create a primary partition you need to use the following command:

create partition primary

9.Type the following command into cmd and hit Enter:

select partition 1

10.You need to set the partition as active:

active

11.Now you need to format the partition as NTFS and set a label:

format FS=NTFS label=any_name quick

Note: Replace any_name with anything you want to name your drive.

12.Type the following command to assign a drive letter and press Enter:

assign letter=G

Note: Make sure the letter G or any other letter you choose isn’t in use by any other drive.

13.Finally, type exit to close DiskPart and command prompt.

Recommended:

• Read Event Viewer Log for Chkdsk in Windows 10
• How To Cancel a Scheduled Chkdsk in Windows 10
• 4 Ways to Run Disk Error Checking in Windows 10
• Back Up And Restore Your Bookmarks in Google Chrome

That’s it you have successfully learned How to Clean Disk using Diskpart Clean Command in Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• Windows 10中的Fix Microsoft Compatibility Telemetry High Disk Usage

• 4 Ways至Windows 10中的Run Disk Error Checking

• Windows 10的Fix High CPU and Disk usage problem

• 在Windows 10上释放Hard Disk Space的10种方法

• Windows 10 Start Menu中Replace Powershell Command Prompt

• Windows 10中的Defer Feature and Quality Updates

• 如何在Windows 10中更改Screen Brightness

• 如何在Windows 10上运行JAR Files

• 如何在 Windows 10 中格式化磁盘或驱动器

• 如何禁用Windows 10 Firewall

• Windows 10上的Fix Steam Corrupt Disk Error

• 如何在Windows 10中启用或Disable Emoji Panel

• 如何在Windows 10中删除Volume or Drive Partition

• 在 Windows 10 中启用或禁用强制磁盘配额限制

• USB Device不在Windows 10工作[求助]

• 如何在Windows 10中创建System Image Backup

• 在Windows 10中添加Printer [指南]

• 修复 Windows 10 中 WSAPPX 的高磁盘使用率

• 如何在 Windows 10 中使用磁盘清理

• 5 Ways在Windows 10中打开Elevated Command Prompt