修复您已使用临时配置文件登录错误： ^{(Fix You’ve been signed in with a temporary profile error: )}当您尝试使用您的用户帐户登录Windows并收到以下错误消息“您已使用临时配置文件登录”时，这意味着您的用户帐户配置文件已损坏。好吧^(Well)，您所有的用户配置文件信息和设置都保存在注册表^(Registry)项中，这些注册表项很容易损坏。当用户配置文件损坏时，Windows将使用临时配置文件而不是标准用户配置文件登录。在这种情况下，您将收到以下错误消息：

您已使用临时个人资料登录。^{(You’ve been signed in with a temporary profile.)}
您无法访问您的文件，并且在您退出时在此配置文件中创建的文件将被删除。要解决此问题，请退出并稍后再尝试登录。请参阅事件日志了解更多详细信息或联系您的系统管理员。^{(You can’t access your files, and files created in this profile will be deleted when you sign out. To fix this, sign out and try signing in later. Please see the event log for more details or contact your system administrator.)}

没有特别的损坏原因，因为它可能由于安装Windows更新、升级Windows、重新启动 PC、安装 3d 方应用程序、更改注册表值等任何事情而发生。所以不要浪费任何时间，让我们看看如何真正修复^(Fix)你在下面列出的故障排除指南的帮助下，已登录时出现临时配置文件错误。

您登录时出现临时个人资料错误 [已解决]

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

在执行任何操作之前，您必须启用内置管理员帐户，这将帮助您进行故障排除：

a) 按Windows Key + X，然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

b）键入以下命令并按Enter：

net user administrator /active: yes

注意：完成故障排除后，请按照上述相同步骤，然后键入“ net user Administrator /active: no ”以禁用内置管理员帐户。

c) 重新启动您的 PC 并登录到这个新的管理员帐户。^{( login to this new administrator account.)}

方法一：运行 SFC 和 DISM^{(Method 1: Run SFC and DISM)}

1.按Windows Key + X然后单击命令提示符（管理员）。^{( Command Prompt(Admin).)}

2.现在在cmd中输入以下内容并回车：

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.等待上述过程完成，完成后重新启动您的电脑。

4.再次打开cmd并输入以下命令并在每个命令后按回车键：

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5.让DISM命令运行并等待它完成。

6. 如果上述命令不起作用，请尝试以下操作：

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

注意：^(Note:) 将^(Replace)C:RepairSourceWindows 替换为修复源的位置（Windows 安装^{(Windows Installation)}或恢复光盘^{(Recovery Disc)}）。

7.重新启动您的 PC 以保存更改并查看您是否能够 修复您已登录并出现临时配置文件错误。^{(Fix You’ve been signed in with a temporary profile error.)}

方法2：运行系统还原^{(Method 2: Run System Restore)}

1.按 Windows 键 + R 并输入“ sysdm.cpl ”然后回车。

2.选择系统保护^{(System Protection)}选项卡，然后选择系统还原。^{( System Restore.)}

3.单击下一步并选择所需的系统还原点^{(System Restore point)}。

4.按照屏幕提示完成系统还原。

5.重新启动后，您可能能够修复您已登录并出现临时配置文件错误。^{(Fix You’ve been signed in with a temporary profile error.)}

方法 3：注册表修复^{(Method 3: Registry Fix)}

注意：确保备份注册表^{(backup registry)}以防万一出现问题。

1.按Windows Key + X然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

2.在 cmd 中键入以下命令并按Enter：

wmic useraccount where name=’USERNAME’ get sid

注意：将USERNAME替换为您的实际帐户用户名。将命令的输出记录到单独的记事本文件中。

示例：wmic useraccount where name=’aditya’ get sid

3.按 Windows 键 + R 然后键入regedit并按Enter打开注册表编辑器^{(Registry Editor)}。

4.导航到以下注册表项：

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

5.在 ProfileList 下^{(ProfileList)}，您将找到特定于用户配置文件的 SID^{( you will find the SID specific to a users profile)}。使用我们在第 2 步中记下的SID，找到您的配置文件的正确SID。

6.现在你会发现会有两个同名的SID，一个带有.bak扩展名，另一个没有。

7.选择没有.bak 扩展名的SID ，然后在右侧窗格中双击^(SID)ProfileImagePath 字符串。^{(ProfileImagePath string.)}

8.在值数据路径中，它会指向造成所有问题的C:\Users\temp

9.现在右键单击没有 .bak 扩展名的SID ，然后^(SID)选择删除。^{(select Delete.)}

10.选择扩展名为.bak的^(.bak)SID，然后双击ProfileImagePath字符串并将其值更改为C:\Users\YOUR_USERNAME.

注意：^(Note:)使用您的实际帐户用户名重命名YOUR_USERNAME 。

11.接下来，右键单击扩展名为 .bak 的 SID，^{(SID with .bak extension)}然后选择重命名^(Rename)。从 SID 名称中删除 .bak 扩展名，然后按 Enter。^{(Remove the .bak extension from the SID name and hit Enter.)}

12.关闭注册表编辑器^{(Registry Editor)}并重新启动您的 PC 以保存更改。

受到推崇的：^{(Recommended:)}

• 修复无法设置默认打印机错误 0x00000709^{(Fix Unable to Set Default Printer Error 0x00000709)}
• 如何修复麦克风在 Windows 10 上不起作用^{(How to Fix Microphone Not Working on Windows 10)}
• 修复桌面引用不可用的位置^{(Fix Desktop Refers to A Location That Is Unavailable)}
• 修复 WiFi 在 Windows 10 中无法自动连接^{(Fix WiFi doesn’t connect automatically in Windows 10)}

就是这样，您已成功修复您已登录时出现临时个人资料错误^{(Fix You’ve been signed in with a temporary profile error)}，但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

You've been signed in with a temporary profile error [SOLVED]

Fix You’ve been signed in with a temporary profile error: When you try to login to Windows using your user account and you receive the following error message “You’ve been signed in with a temporary profile” then this means that your user account profile has been corrupted. Well, all your user profile information and settings are saved in Registry keys which can easily become corrupt. When the user profile gets corrupted Windows will log you in with a temporary profile rather than the standard user profile. In such case you will receive the following error message:

You’ve been signed in with a temporary profile.
You can’t access your files, and files created in this profile will be deleted when you sign out. To fix this, sign out and try signing in later. Please see the event log for more details or contact your system administrator.

There is no particular cause of corruption as it can happen due to anything such as installing Windows updates, upgrading your Windows, restarting your PC, installing 3d party apps, changing registry values etc. So without wasting any time let’s see how to actually Fix You’ve been signed in with a temporary profile error with the help of below-listed troubleshooting guide.

You’ve been signed in with a temporary profile error [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Before doing anything you must enable the built-in administrator account which will help you in troubleshooting:

a)Press Windows Key + X then select Command Prompt (Admin).

b)Type the following command and hit Enter:

net user administrator /active: yes

Note: Once you’re done with the troubleshooting follow the above same steps then type “net user Administrator /active: no” in order to disable the built-in administrator account.

c)Restart your PC and login to this new administrator account.

Method 1: Run SFC and DISM

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.Wait for the above process to finish and once done restart your PC.

4.Again open cmd and type the following command and hit enter after each one:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5.Let the DISM command run and wait for it to finish.

6. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

7.Reboot your PC to save changes and see if you’re able to Fix You’ve been signed in with a temporary profile error.

Method 2: Run System Restore

1.Press Windows Key + R and type”sysdm.cpl” then hit enter.

2.Select System Protection tab and choose System Restore.

3.Click Next and choose the desired System Restore point.

4.Follow the on-screen instruction to complete system restore.

5.After reboot, you may be able to Fix You’ve been signed in with a temporary profile error.

Method 3: Registry Fix

Note: Make sure to backup registry just in case something goes wrong.

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd and hit Enter:

wmic useraccount where name=’USERNAME’ get sid

Note: Replace USERNAME with your actual account username. Note down the output of the command into a seperate notepad file.

Example: wmic useraccount where name=’aditya’ get sid

3.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

4.Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

5.Under ProfileList, you will find the SID specific to a users profile. Using the the SID we noted in step 2, find the correct SID of your profile.

6.Now you will find that there would be two SID’s with the same name, one with .bak extension and other without it.

7.Select the SID which doesn’t have .bak extension, then in the right window pane double-click on ProfileImagePath string.

8.In the value data path, it would direct to C:\Users\temp which is creating all the problem.

9.Now right-click on the SID which doesn’t have .bak extension and select Delete.

10.Select SID with the .bak extension then double-click on ProfileImagePath string and change it’s value to C:\Users\YOUR_USERNAME.

Note: Rename YOUR_USERNAME with your actual account username.

11.Next, right-click on SID with .bak extension and select Rename. Remove the .bak extension from the SID name and hit Enter.

12.Close Registry Editor and reboot your PC to save changes.

Recommended:

• Fix Unable to Set Default Printer Error 0x00000709
• How to Fix Microphone Not Working on Windows 10
• Fix Desktop Refers to A Location That Is Unavailable
• Fix WiFi doesn’t connect automatically in Windows 10

That’s it you have successfully Fix You’ve been signed in with a temporary profile error but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• USB Device不在Windows 10工作[求助]

• Windows 10中的Mouse Pointer Lags [已解决]

• Display driver停止响应并恢复错误[已解决]

• WiFi在Windows 10中断断开连接[已解决]

• Windows 10 Creator Update无法安装[已解决]

• Windows 资源管理器已停止工作 [已解决]

• 数字小键盘在 Windows 10 中不起作用 [已解决]

• USB 端口在 Windows 10 中不工作 [已解决]

• 修复 Windows 10 中的键盘输入延迟 [已解决]

• 端点映射器没有更多可用的端点 [已解决]

• 帮助！颠倒或侧向屏幕问题[解决]

• Windows 10缺少Pin至Start Menu Option [已解决]

• 发生磁盘读取错误 [已解决]

• Fix Ethernet不在Windows 10中工作[解决]

• Fix您的Computer是Low在内存警告[解决]

• Microsoft Virtual Wifi Miniport Adapter driver问题[解决]

• Windows 10缺少Fix MSVCR120.dll [已解决]

• 修复Nexus Mod Manager登录错误[已解决]

• Laptop Keyboard无法正常工作[已解决]

• WiFi 受限连接问题 [已解决]