修复光标随机跳跃或移动:(Fix Cursor Jumps or moves randomly:) 许多用户在更新Windows操作系统后遇到鼠标光标随机跳跃或不时自动移动的问题。这似乎是鼠标在自行移动而无需您控制鼠标。鼠标的这种水平或垂直移动会自动惹恼用户,但有一些方法可以用来解决这个问题。在本文中,您将了解解决此问题的不同方法。
修复 Windows 10 中光标随机跳跃或移动的问题(Fix Cursor Jumps or moves randomly in Windows 10)
确保 创建一个还原点(create a restore point) 以防万一出现问题。
方法一:检查鼠标硬件(Method 1: Checking the hardware of your Mouse)
在对您的系统进行任何技术调整之前,让我们首先检查硬件(即鼠标)是否按预期工作。为此,请拔出鼠标并将其放入另一个系统并尝试检查鼠标是否正常工作。另外,检查USB端口(USB ports)是否有损坏;鼠标按钮和电线是否完好无损且工作正常。
方法 2:更改触摸板延迟(Method 2: Change Touchpad Delay)
如果您使用的是笔记本电脑,触摸板需要彻底检查。由于您的笔记本电脑触摸板以及外接鼠标充当系统的指点设备,因此触摸板可能会导致问题。您可以尝试在鼠标单击之前更改触摸板延迟,以修复 Windows 10 中的光标跳跃或随机移动。(Fix Cursor Jumps or moves randomly in Windows 10.)为此,步骤如下:
1.使用组合键Windows Key + I 打开设置(Settings)窗口。
2.现在从设置窗口中选择“设备”。(Devices)
3.从左侧窗格中选择触摸板。(Touchpad.)
4.现在从选项中更改延迟或触摸板灵敏度(Touchpad sensitivity)。
方法 3:禁用触摸板(Method 3: Disable the Touchpad)
为了检查问题是否出在您的鼠标上,您必须禁用笔记本电脑的触摸板并检查问题是否仍然存在?如果问题仍然存在,您只需重新打开触摸板即可。要做到这一点,步骤是 -
1.按Windows Key + I 打开设置(Settings),然后单击 设备。( Devices.)
2.从左侧菜单中选择鼠标,然后单击附加鼠标选项。(Additional mouse options.)
3.现在切换到鼠标属性(Mouse Properties)窗口中的最后一个选项卡,此选项卡的名称取决于制造商,例如设备设置、Synaptics 或 ELAN 等。( Device Settings, Synaptics, or ELAN etc.)
4.下一步,选择您的设备,然后单击“禁用。(Disable.)“
5.重新启动您的 PC 以保存更改。
6.重启后,确认鼠标自行移动的问题是否已修复。如果是这样,请再次启用您的触摸板。如果不是,那么您的触摸板设置有问题。
或者
1.按 Windows 键 + I 打开设置(Settings),然后单击设备。(Devices.)
2.从左侧菜单中选择触摸板。(Touchpad.)
3.在触摸板下取消选中(uncheck)“连接鼠标时保持触摸板打开(Leave touchpad on when a mouse is connected)”。
4.重新启动您的 PC 以保存更改。
方法 4:更新鼠标驱动程序(Method 4: Update your Mouse Drivers)
问题可能是由于您的驱动程序过时或损坏。因此,这种方法还可以帮助您 在 Windows 10 中修复光标跳跃或随机移动: (Fix Cursor Jumps or moves randomly in Windows 10: )
1.按 Windows 键 + R 然后键入 devmgmt.msc并按 Enter 打开设备管理器。(Device Manager.)
2.展开“鼠标和其他指针设备(Mice and other pointing devices)”并右键单击您的设备并选择“更新驱动程序(Update Driver)”。
3.然后选择“自动搜索更新的驱动程序软件(Search automatically for updated driver software)”选项,它将自动在互联网上搜索更新的驱动程序。
4.如果搜索失败,您可以手动前往设备制造商的网站,手动下载更新后的鼠标(Mouse)驱动程序。
或者
1.按Windows Key + X然后选择设备管理器。(Device Manager.)
2.扩展鼠标和其他指针设备。(Mice and other pointing devices.)
3.右键单击您的 设备( device) 并选择属性。(Properties.)
4.切换到驱动程序选项卡(Driver tab),然后单击更新驱动程序。(Update Driver.)
5.现在选择浏览我的电脑以获取驱动程序软件。(Browse my computer for driver software.)
6.下一步,选择让我从计算机上的设备驱动程序列表中选择。(Let me pick from a list of device drivers on my computer.)
7.从列表中选择符合 HID 标准的设备( HID-compliant device),然后单击下一步。(Next.)
8.安装驱动程序后,重新启动PC以保存更改。
方法 5:运行硬件和设备疑难解答(Method 5: Run Hardware and Devices Troubleshooter)
1.转到开始并键入“控制面板(Control Panel)”并单击打开它。
2.从右上角,选择查看( View By)方式为“大图标(Large Icons)”,然后单击“故障排除(Troubleshooting)”。
3.接下来,从左侧窗格中单击“查看全部(View All)”。
4.现在从打开的列表中选择“硬件和设备(Hardware and Devices)”。
5.按照屏幕上的说明运行硬件和设备疑难解答。(Hardware and Devices troubleshooter.)
6.如果发现任何硬件问题,请保存所有工作并单击“应用此修复(Apply this fix)”选项。
看看您是否能够修复光标跳跃或随机移动(fix Cursor Jumps or moves randomly)问题,如果没有,则继续下一个方法。
方法 6:使用反恶意软件扫描您的 PC(Method 6: Scan your PC with Anti-Malware)
恶意软件(Malware)会在包括鼠标在内的各种服务和程序中造成巨大的麻烦。恶意软件制造问题的可能性是无穷无尽的。因此,建议下载并安装恶意软件(Malware)字节或其他反恶意软件应用程序等应用程序,以扫描系统中的恶意软件。这可能会修复鼠标自行移动、光标跳跃或随机鼠标移动问题。
1.下载并安装 CCleaner & Malwarebytes。
2.运行 Malwarebytes(Run Malwarebytes)(Run Malwarebytes) 并让它扫描您的系统以查找有害文件。
3.如果发现恶意软件,它将自动删除它们。
4.现在运行 CCleaner ,在“Cleaner”部分的“ Windows ”选项卡下,我们建议检查以下要清理的选项:
5.一旦您确定检查了正确的点,只需单击 Run Cleaner, 然后让 CCleaner 运行。
6.要清理您的系统,请进一步选择注册表选项卡(Registry tab)并确保选中以下内容:
7.选择Scan for Issue并允许CCleaner扫描,然后单击 Fix Selected Issues。
8.当CCleaner 询问“您要备份对注册表的更改吗?(Do you want backup changes to the registry?)” 选择是。(Yes.)
9.备份完成后,选择修复所有选定问题。(Fix All Selected Issues.)
10.重新启动您的 PC 以保存更改。
方法 7:更改鼠标灵敏度(Method 7: Changing the Mouse Sensitivity)
1.按Windows Key + I 打开设置(Settings),然后单击设备。(Devices.)
2.现在从左侧窗格中选择鼠标。(Mouse.)
3.接下来,点击鼠标(Mouse)设置窗口最右侧的“附加鼠标选项”。(Additional Mouse Options)
4.这将打开鼠标属性(Mouse Properties)窗口,这里切换到“指针选项(Pointer Options)”选项卡。
5.在运动部分下,您将看到一个滑块。您必须将滑块从高到中移动到低,并检查问题是否得到解决。
6.单击应用(Apply),然后单击确定以保存更改。
方法 8:禁用 Realtek 高清音频管理器(Method 8: Disable Realtek HD Audio Manager)
Realtek HD Audio Manager处理您的系统音频并负责使 PC 声音正常工作。但是这个实用程序也很流行干扰系统的其他驱动程序。因此,您需要禁用它以修复 Windows 10 问题中的光标跳跃或随机移动(Fix Cursor Jumps or moves randomly in Windows 10 issue)。
1.同时按Ctrl+Shift+Esc组合键打开任务管理器(Task Manager)。
2.现在切换到启动(Startup)选项卡并选择 Realtek HD Audio Manager,然后单击禁用(Disabl)按钮。
3.这将禁用Realtek HD Audio Manager(disable Realtek HD Audio Manager)在系统启动时自动启动。
方法 9:更新您的 Windows(Method 9: Update Your Windows)
1.按Windows Key + I 打开设置(Settings),然后单击更新和安全(Update & Security)图标。
2.然后在更新(Update)状态下单击“检查更新。(Check for updates.)“
3.如果为您的 PC 找到更新,请安装更新并重新启动您的 PC。
受到推崇的:(Recommended:)
我希望这篇文章对您有所帮助,现在您可以在 Windows 10 中轻松修复光标跳跃或随机移动(Fix Cursor Jumps or moves randomly in Windows 10),但如果您对本教程仍有任何疑问,请随时在评论部分提出。
Fix Cursor Jumps or moves randomly in Windows 10
Fix Cursor Jumps or moves randomly: Many users encounter the issue in the mouse after updating their Windows OS, where the mouse cursor jumps randomly or keeps moving automatically at times. This seems as if the mouse is moving on its own without you controlling the mouse. This horizontal or vertical movement of the mouse automatically annoys the users but there are approaches that can be used to solve this problem. In this article, you will learn about the different approach to solve this issue.
Fix Cursor Jumps or moves randomly in Windows 10
Make sure to create a restore point just in case something goes wrong.
Method 1: Checking the hardware of your Mouse
Before doing any technical tweaks to your system, let us first check whether the hardware i.e. the mouse is working as expected or not. To do this, plug out your mouse & put it into another system & try to check whether the mouse is working fine or not. Also, make sure whether there is any damage to the USB ports or not; buttons of the mouse as well as the wires are intact & working perfectly or not.
Method 2: Change Touchpad Delay
In case you are using a laptop, the touchpad needs a thorough check. As your laptop touchpad, as well as an external mouse, is acting as the pointing device for your system, it may happen that the touchpad may cause the issue. You can try to alter the touchpad delay prior to the working of a mouse click in order to Fix Cursor Jumps or moves randomly in Windows 10. To do this, the steps are –
1.Use the key combination Windows Key + I to open the Settings window.
2.Now choose “Devices” from the settings window.
3.From the left-hand window pane select Touchpad.
4.Now alter the Delay or Touchpad sensitivity from the options.
Method 3: Disable the Touchpad
In order to check if the problem lies in your mouse or not, you have to disable your laptop’s touchpad & check whether the issue still remains or not? If the issue remains, you can simply turn the touchpad back on. To do this the steps are –
1.Press Windows Key + I to open Settings then click on Devices.
2.Select Mouse from the left-hand menu & then click on Additional mouse options.
3.Now switch to the last tab in the Mouse Properties window and the name of this tab depends on the manufacturer such as Device Settings, Synaptics, or ELAN etc.
4.Next, select your device then click “Disable.“
5.Reboot your PC to save changes.
6.After the reboot, confirm whether your mouse moving on its own issue is fixed or not. If it does, enable back your touchpad again. If not, then there was a problem with your touchpad settings.
OR
1.Press Windows Key + I to open Settings then click on Devices.
2.From the left-hand menu select Touchpad.
3.Under Touchpad uncheck “Leave touchpad on when a mouse is connected“.
4.Reboot your PC to save changes.
Method 4: Update your Mouse Drivers
The problem may because of your outdated or corrupted driver. So, this approach can also help you Fix Cursor Jumps or moves randomly in Windows 10:
1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.
2.Expand “Mice and other pointing devices” and right-click on your device and choose “Update Driver”.
3.Then choose the option “Search automatically for updated driver software” which will search on the internet for the updated driver automatically.
4.If this search fails, you can manually go to the website of your device manufacturer and manually download the updated Mouse driver.
OR
1.Press Windows Key + X then select Device Manager.
2.Expand Mice and other pointing devices.
3.Right-click on your device and select Properties.
4.Switch to Driver tab and click on Update Driver.
5.Now select Browse my computer for driver software.
6.Next, select Let me pick from a list of device drivers on my computer.
7.Select the HID-compliant device from the list and click Next.
8.After the driver is installed restart your PC to save changes.
Method 5: Run Hardware and Devices Troubleshooter
1.Go to Start and type “Control Panel” and click to open it.
2.From the top right, select View By as “Large Icons” & then click on “Troubleshooting”.
3.Next, from the left-hand window pane click on “View All”.
4.Now from the list which opens choose “Hardware and Devices”.
5.Follow on-screen instructions to run the Hardware and Devices troubleshooter.
6.If any hardware issues are found, then save all of your work and click “Apply this fix” option.
See if you’re able to fix Cursor Jumps or moves randomly issue or not, if not then continue with the next method.
Method 6: Scan your PC with Anti-Malware
Malware can cause tremendous trouble in various services and programs including the mouse. The possibilities of creating issues by malware are endless. So, it is recommended to download and install applications like Malwarebytes or other anti-malware applications to scan for malware in your system. This may fix the mouse moving on its own, cursor jumps or random mouse movement issue.
1.Download and install CCleaner & Malwarebytes.
2.Run Malwarebytes and let it scan your system for harmful files.
3.If malware is found it will automatically remove them.
4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:
5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.
6.To clean your system further select the Registry tab and ensure the following are checked:
7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.
8.When CCleaner asks “Do you want backup changes to the registry?” select Yes.
9.Once your backup has completed, select Fix All Selected Issues.
10.Restart your PC to save changes.
Method 7: Changing the Mouse Sensitivity
1.Press Windows Key + I to open Settings then click on Devices.
2.Now from the left hand window pane select Mouse.
3.Next, click on “Additional Mouse Options” from the rightmost part of the Mouse settings window.
4.This will open Mouse Properties window, here switch to “Pointer Options” tab.
5.Under the motion section, you will see a slider. You have to move the slider from high to moderate to low and check if the issue is getting resolved or not.
6.Click Apply followed by OK to save the changes.
Method 8: Disable Realtek HD Audio Manager
Realtek HD Audio Manager deals with your system audio and is responsible to make the PC sound work. But this utility program is also popular for interfering with other drivers of your system. So, you need to disable it in order to Fix Cursor Jumps or moves randomly in Windows 10 issue.
1.Press Ctrl+Shift+Esc key combination together to open Task Manager.
2.Now switch to Startup tab and select Realtek HD Audio Manager then click on Disable button.
3.This will disable Realtek HD Audio Manager from automatically launching when the system starts.
Method 9: Update Your Windows
1.Press Windows Key + I to open Settings then click on Update & Security icon.
2.Then under Update status click on “Check for updates.“
3.If an update is found for your PC, install the update and reboot your PC.
Recommended:
I hope this article was helpful and now you can easily Fix Cursor Jumps or moves randomly in Windows 10, but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.